mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Matias Bjørling" <m@bjorling.me>
To: axboe@fb.com
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Javier González" <javier@cnexlabs.com>,
	"Matias Bjørling" <m@bjorling.me>
Subject: [GIT PULL 17/58] lightnvm: pblk: fix min size for page mempool
Date: Fri, 13 Oct 2017 14:46:06 +0200	[thread overview]
Message-ID: <20171013124647.32668-18-m@bjorling.me> (raw)
In-Reply-To: <20171013124647.32668-1-m@bjorling.me>

From: Javier González <javier@cnexlabs.com>

pblk uses an internal page mempool for allocating pages on internal
bios. The main two users of this memory pool are partial reads (reads
with some sectors in cache and some on media) and padded writes, which
need to add dummy pages to an existing bio already containing valid
data (and with a large enough bioset allocated). In both cases, the
maximum number of pages per bio is defined by the maximum number of
physical sectors supported by the underlying device.

This patch fixes a bad mempool allocation, where the min_nr of elements
on the pool was fixed (to 16), which is lower than the maximum number
of sectors supported by NVMe (as of the time for this patch). Instead,
use the maximum number of allowed sectors reported by the device.

Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
---
 drivers/lightnvm/pblk-core.c |  6 +++---
 drivers/lightnvm/pblk-init.c | 15 ++++++++-------
 drivers/lightnvm/pblk-read.c |  2 +-
 drivers/lightnvm/pblk.h      |  2 +-
 4 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/lightnvm/pblk-core.c b/drivers/lightnvm/pblk-core.c
index 9299a5a..f5fbb9a 100644
--- a/drivers/lightnvm/pblk-core.c
+++ b/drivers/lightnvm/pblk-core.c
@@ -192,7 +192,7 @@ void pblk_bio_free_pages(struct pblk *pblk, struct bio *bio, int off,
 
 	for (i = off; i < nr_pages + off; i++) {
 		bv = bio->bi_io_vec[i];
-		mempool_free(bv.bv_page, pblk->page_pool);
+		mempool_free(bv.bv_page, pblk->page_bio_pool);
 	}
 }
 
@@ -204,14 +204,14 @@ int pblk_bio_add_pages(struct pblk *pblk, struct bio *bio, gfp_t flags,
 	int i, ret;
 
 	for (i = 0; i < nr_pages; i++) {
-		page = mempool_alloc(pblk->page_pool, flags);
+		page = mempool_alloc(pblk->page_bio_pool, flags);
 		if (!page)
 			goto err;
 
 		ret = bio_add_pc_page(q, bio, page, PBLK_EXPOSED_PAGE_SIZE, 0);
 		if (ret != PBLK_EXPOSED_PAGE_SIZE) {
 			pr_err("pblk: could not add page to bio\n");
-			mempool_free(page, pblk->page_pool);
+			mempool_free(page, pblk->page_bio_pool);
 			goto err;
 		}
 	}
diff --git a/drivers/lightnvm/pblk-init.c b/drivers/lightnvm/pblk-init.c
index eee4eeb..7b1f29c 100644
--- a/drivers/lightnvm/pblk-init.c
+++ b/drivers/lightnvm/pblk-init.c
@@ -132,7 +132,6 @@ static int pblk_rwb_init(struct pblk *pblk)
 }
 
 /* Minimum pages needed within a lun */
-#define PAGE_POOL_SIZE 16
 #define ADDR_POOL_SIZE 64
 
 static int pblk_set_ppaf(struct pblk *pblk)
@@ -247,14 +246,16 @@ static int pblk_core_init(struct pblk *pblk)
 	if (pblk_init_global_caches(pblk))
 		return -ENOMEM;
 
-	pblk->page_pool = mempool_create_page_pool(PAGE_POOL_SIZE, 0);
-	if (!pblk->page_pool)
+	/* internal bios can be at most the sectors signaled by the device. */
+	pblk->page_bio_pool = mempool_create_page_pool(nvm_max_phys_sects(dev),
+									0);
+	if (!pblk->page_bio_pool)
 		return -ENOMEM;
 
 	pblk->line_ws_pool = mempool_create_slab_pool(PBLK_WS_POOL_SIZE,
 							pblk_blk_ws_cache);
 	if (!pblk->line_ws_pool)
-		goto free_page_pool;
+		goto free_page_bio_pool;
 
 	pblk->rec_pool = mempool_create_slab_pool(geo->nr_luns, pblk_rec_cache);
 	if (!pblk->rec_pool)
@@ -309,8 +310,8 @@ static int pblk_core_init(struct pblk *pblk)
 	mempool_destroy(pblk->rec_pool);
 free_blk_ws_pool:
 	mempool_destroy(pblk->line_ws_pool);
-free_page_pool:
-	mempool_destroy(pblk->page_pool);
+free_page_bio_pool:
+	mempool_destroy(pblk->page_bio_pool);
 	return -ENOMEM;
 }
 
@@ -322,7 +323,7 @@ static void pblk_core_free(struct pblk *pblk)
 	if (pblk->bb_wq)
 		destroy_workqueue(pblk->bb_wq);
 
-	mempool_destroy(pblk->page_pool);
+	mempool_destroy(pblk->page_bio_pool);
 	mempool_destroy(pblk->line_ws_pool);
 	mempool_destroy(pblk->rec_pool);
 	mempool_destroy(pblk->g_rq_pool);
diff --git a/drivers/lightnvm/pblk-read.c b/drivers/lightnvm/pblk-read.c
index ee8efb5..402c732 100644
--- a/drivers/lightnvm/pblk-read.c
+++ b/drivers/lightnvm/pblk-read.c
@@ -238,7 +238,7 @@ static int pblk_fill_partial_read_bio(struct pblk *pblk, struct nvm_rq *rqd,
 		kunmap_atomic(src_p);
 		kunmap_atomic(dst_p);
 
-		mempool_free(src_bv.bv_page, pblk->page_pool);
+		mempool_free(src_bv.bv_page, pblk->page_bio_pool);
 
 		hole = find_next_zero_bit(read_bitmap, nr_secs, hole + 1);
 	} while (hole < nr_secs);
diff --git a/drivers/lightnvm/pblk.h b/drivers/lightnvm/pblk.h
index b592e51..229f602 100644
--- a/drivers/lightnvm/pblk.h
+++ b/drivers/lightnvm/pblk.h
@@ -620,7 +620,7 @@ struct pblk {
 
 	struct list_head compl_list;
 
-	mempool_t *page_pool;
+	mempool_t *page_bio_pool;
 	mempool_t *line_ws_pool;
 	mempool_t *rec_pool;
 	mempool_t *g_rq_pool;
-- 
2.9.3

  parent reply	other threads:[~2017-10-13 13:00 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-13 12:45 [GIT PULL 00/58] LightNVM updates for 4.15 Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 01/58] lightnvm: prevent target type module removal when in use Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 02/58] lightnvm: prevent bd removal if busy Matias Bjørling
2017-10-13 14:58   ` Christoph Hellwig
2017-10-13 15:35     ` Rakesh Pandit
2017-10-13 15:58       ` Javier González
2017-10-14  6:04         ` Javier González
2017-10-16 15:14       ` Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 03/58] lightnvm: protect target type list with correct locks Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 04/58] lightnvm: remove already calculated nr_chnls Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 05/58] lightnvm: pblk: fix error path in pblk_lines_alloc_metadata Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 06/58] lightnvm: include NVM Express driver if OCSSD is selected for build Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 07/58] lightnvm: pblk: protect line bitmap while submitting meta io Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 08/58] lightnvm: pblk: fix message if L2P MAP is in device Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 09/58] lightnvm: pblk: improve error message if down_timeout fails Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 10/58] lightnvm: pblk: print incompatible line version correctly Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 11/58] lightnvm: pblk: reuse pblk_gc_should_kick Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 12/58] lightnvm: pblk: initialize debug stat counter Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 13/58] lightnvm: pblk: use right flag for GC allocation Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 14/58] lightnvm: pblk: free padded entries in write buffer Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 15/58] lightnvm: pblk: fix write I/O sync stat Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 16/58] lightnvm: pblk: avoid deadlock on low LUN config Matias Bjørling
2017-10-13 12:46 ` Matias Bjørling [this message]
2017-10-13 12:46 ` [GIT PULL 18/58] lightnvm: pblk: simplify work_queue mempool Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 19/58] lightnvm: pblk: decouple read/erase mempools Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 20/58] lightnvm: pblk: do not use a mempool for line bitmaps Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 21/58] lightnvm: pblk: remove checks on mempool alloc Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 22/58] lightnvm: pblk: use constant for GC max inflight Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 23/58] lightnvm: pblk: normalize ppa namings Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 24/58] lightnvm: pblk: refactor read lba sanity check Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 25/58] lightnvm: pblk: simplify data validity check on GC Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 26/58] lightnvm: pblk: refactor read path " Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 27/58] lightnvm: pblk: put bio on bio completion Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 28/58] lightnvm: pblk: simplify path on REQ_PREFLUSH Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 29/58] lightnvm: pblk: allocate bio size more accurately Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 30/58] lightnvm: pblk: improve naming for internal req Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 31/58] lightnvm: pblk: refactor rqd alloc/free Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 32/58] lightnvm: pblk: use rqd->end_io for completion Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 33/58] lightnvm: pblk: check lba sanity on read path Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 34/58] lightnvm: pblk: guarantee line integrity on reads Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 35/58] lightnvm: pblk: remove redundant check on read path Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 36/58] lightnvm: pblk: remove I/O dependency on write path Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 37/58] lightnvm: pblk: enable 1 LUN configuration Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 38/58] lightnvm: pblk: ensure right bad block calculation Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 39/58] lightnvm: pblk: fix changing GC group list for a line Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 40/58] lightnvm: pblk: remove useless line Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 41/58] lightnvm: remove unused argument from nvm_set_tgt_bb_tbl Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 42/58] lightnvm: remove stale extern and unused exported symbols Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 43/58] lightnvm: pblk: reduce arguments in __pblk_rb_update_l2p Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 44/58] lightnvm: pblk: fix releases of kmem cache in error path Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 45/58] lightnvm: pblk: prevent gc kicks when gc is not operational Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 46/58] lightnvm: pblk: recover partially written lines correctly Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 47/58] lightnvm: pblk: free full lines during recovery Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 48/58] lightnvm: pblk: start gc if needed during init Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 49/58] lightnvm: pblk: consider bad sectors in emeta during recovery Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 50/58] lightnvm: pblk: shut down gc gracefully during exit Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 51/58] lightnvm: pblk: add l2p crc debug printouts Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 52/58] lightnvm: pblk: gc all lines in the pipeline before exit Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 53/58] lightnvm: pblk: correct valid lba count calculation Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 54/58] lightnvm: pblk: remove spinlock when freeing line metadata Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 55/58] lightnvm: pblk: cleanup unused and static functions Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 56/58] lightnvm: pblk: avoid being reported as hung on rated GC Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 57/58] lightnvm: fail fast on passthrough commands Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 58/58] lightnvm: implement generic path for sync I/O Matias Bjørling
2017-10-13 14:36 ` [GIT PULL 00/58] LightNVM updates for 4.15 Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171013124647.32668-18-m@bjorling.me \
    --to=m@bjorling.me \
    --cc=axboe@fb.com \
    --cc=javier@cnexlabs.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®