mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Matias Bjørling" <m@bjorling.me>
To: axboe@fb.com
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Hans Holmberg" <hans.holmberg@cnexlabs.com>,
	"Matias Bjørling" <m@bjorling.me>
Subject: [GIT PULL 51/58] lightnvm: pblk: add l2p crc debug printouts
Date: Fri, 13 Oct 2017 14:46:40 +0200	[thread overview]
Message-ID: <20171013124647.32668-52-m@bjorling.me> (raw)
In-Reply-To: <20171013124647.32668-1-m@bjorling.me>

From: Hans Holmberg <hans.holmberg@cnexlabs.com>

Print the CRC of the logical-to-physical mapping during exit and
after recovering the L2P table to facilitate detection of meta
data corruption/recovery issues.

The CRC printed after recovery should match the CRC printed during
the previous exit - if it doesn't this indicates that either the meta
data written to the disk is corrupt or recovery failed.

Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
---
 drivers/lightnvm/pblk-init.c | 39 ++++++++++++++++++++++++++++++++++-----
 1 file changed, 34 insertions(+), 5 deletions(-)

diff --git a/drivers/lightnvm/pblk-init.c b/drivers/lightnvm/pblk-init.c
index ad9f014..52c85f4 100644
--- a/drivers/lightnvm/pblk-init.c
+++ b/drivers/lightnvm/pblk-init.c
@@ -76,6 +76,28 @@ static blk_qc_t pblk_make_rq(struct request_queue *q, struct bio *bio)
 	return BLK_QC_T_NONE;
 }
 
+static size_t pblk_trans_map_size(struct pblk *pblk)
+{
+	int entry_size = 8;
+
+	if (pblk->ppaf_bitsize < 32)
+		entry_size = 4;
+
+	return entry_size * pblk->rl.nr_secs;
+}
+
+#ifdef CONFIG_NVM_DEBUG
+static u32 pblk_l2p_crc(struct pblk *pblk)
+{
+	size_t map_size;
+	u32 crc = ~(u32)0;
+
+	map_size = pblk_trans_map_size(pblk);
+	crc = crc32_le(crc, pblk->trans_map, map_size);
+	return crc;
+}
+#endif
+
 static void pblk_l2p_free(struct pblk *pblk)
 {
 	vfree(pblk->trans_map);
@@ -85,12 +107,10 @@ static int pblk_l2p_init(struct pblk *pblk)
 {
 	sector_t i;
 	struct ppa_addr ppa;
-	int entry_size = 8;
+	size_t map_size;
 
-	if (pblk->ppaf_bitsize < 32)
-		entry_size = 4;
-
-	pblk->trans_map = vmalloc(entry_size * pblk->rl.nr_secs);
+	map_size = pblk_trans_map_size(pblk);
+	pblk->trans_map = vmalloc(map_size);
 	if (!pblk->trans_map)
 		return -ENOMEM;
 
@@ -508,6 +528,10 @@ static int pblk_lines_configure(struct pblk *pblk, int flags)
 		}
 	}
 
+#ifdef CONFIG_NVM_DEBUG
+	pr_info("pblk init: L2P CRC: %x\n", pblk_l2p_crc(pblk));
+#endif
+
 	/* Free full lines directly as GC has not been started yet */
 	pblk_gc_free_full_lines(pblk);
 
@@ -901,6 +925,11 @@ static void pblk_exit(void *private)
 	down_write(&pblk_lock);
 	pblk_gc_exit(pblk);
 	pblk_tear_down(pblk);
+
+#ifdef CONFIG_NVM_DEBUG
+	pr_info("pblk exit: L2P CRC: %x\n", pblk_l2p_crc(pblk));
+#endif
+
 	pblk_free(pblk);
 	up_write(&pblk_lock);
 }
-- 
2.9.3

  parent reply	other threads:[~2017-10-13 12:51 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-13 12:45 [GIT PULL 00/58] LightNVM updates for 4.15 Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 01/58] lightnvm: prevent target type module removal when in use Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 02/58] lightnvm: prevent bd removal if busy Matias Bjørling
2017-10-13 14:58   ` Christoph Hellwig
2017-10-13 15:35     ` Rakesh Pandit
2017-10-13 15:58       ` Javier González
2017-10-14  6:04         ` Javier González
2017-10-16 15:14       ` Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 03/58] lightnvm: protect target type list with correct locks Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 04/58] lightnvm: remove already calculated nr_chnls Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 05/58] lightnvm: pblk: fix error path in pblk_lines_alloc_metadata Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 06/58] lightnvm: include NVM Express driver if OCSSD is selected for build Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 07/58] lightnvm: pblk: protect line bitmap while submitting meta io Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 08/58] lightnvm: pblk: fix message if L2P MAP is in device Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 09/58] lightnvm: pblk: improve error message if down_timeout fails Matias Bjørling
2017-10-13 12:45 ` [GIT PULL 10/58] lightnvm: pblk: print incompatible line version correctly Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 11/58] lightnvm: pblk: reuse pblk_gc_should_kick Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 12/58] lightnvm: pblk: initialize debug stat counter Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 13/58] lightnvm: pblk: use right flag for GC allocation Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 14/58] lightnvm: pblk: free padded entries in write buffer Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 15/58] lightnvm: pblk: fix write I/O sync stat Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 16/58] lightnvm: pblk: avoid deadlock on low LUN config Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 17/58] lightnvm: pblk: fix min size for page mempool Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 18/58] lightnvm: pblk: simplify work_queue mempool Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 19/58] lightnvm: pblk: decouple read/erase mempools Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 20/58] lightnvm: pblk: do not use a mempool for line bitmaps Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 21/58] lightnvm: pblk: remove checks on mempool alloc Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 22/58] lightnvm: pblk: use constant for GC max inflight Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 23/58] lightnvm: pblk: normalize ppa namings Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 24/58] lightnvm: pblk: refactor read lba sanity check Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 25/58] lightnvm: pblk: simplify data validity check on GC Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 26/58] lightnvm: pblk: refactor read path " Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 27/58] lightnvm: pblk: put bio on bio completion Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 28/58] lightnvm: pblk: simplify path on REQ_PREFLUSH Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 29/58] lightnvm: pblk: allocate bio size more accurately Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 30/58] lightnvm: pblk: improve naming for internal req Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 31/58] lightnvm: pblk: refactor rqd alloc/free Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 32/58] lightnvm: pblk: use rqd->end_io for completion Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 33/58] lightnvm: pblk: check lba sanity on read path Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 34/58] lightnvm: pblk: guarantee line integrity on reads Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 35/58] lightnvm: pblk: remove redundant check on read path Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 36/58] lightnvm: pblk: remove I/O dependency on write path Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 37/58] lightnvm: pblk: enable 1 LUN configuration Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 38/58] lightnvm: pblk: ensure right bad block calculation Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 39/58] lightnvm: pblk: fix changing GC group list for a line Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 40/58] lightnvm: pblk: remove useless line Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 41/58] lightnvm: remove unused argument from nvm_set_tgt_bb_tbl Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 42/58] lightnvm: remove stale extern and unused exported symbols Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 43/58] lightnvm: pblk: reduce arguments in __pblk_rb_update_l2p Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 44/58] lightnvm: pblk: fix releases of kmem cache in error path Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 45/58] lightnvm: pblk: prevent gc kicks when gc is not operational Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 46/58] lightnvm: pblk: recover partially written lines correctly Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 47/58] lightnvm: pblk: free full lines during recovery Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 48/58] lightnvm: pblk: start gc if needed during init Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 49/58] lightnvm: pblk: consider bad sectors in emeta during recovery Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 50/58] lightnvm: pblk: shut down gc gracefully during exit Matias Bjørling
2017-10-13 12:46 ` Matias Bjørling [this message]
2017-10-13 12:46 ` [GIT PULL 52/58] lightnvm: pblk: gc all lines in the pipeline before exit Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 53/58] lightnvm: pblk: correct valid lba count calculation Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 54/58] lightnvm: pblk: remove spinlock when freeing line metadata Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 55/58] lightnvm: pblk: cleanup unused and static functions Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 56/58] lightnvm: pblk: avoid being reported as hung on rated GC Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 57/58] lightnvm: fail fast on passthrough commands Matias Bjørling
2017-10-13 12:46 ` [GIT PULL 58/58] lightnvm: implement generic path for sync I/O Matias Bjørling
2017-10-13 14:36 ` [GIT PULL 00/58] LightNVM updates for 4.15 Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171013124647.32668-52-m@bjorling.me \
    --to=m@bjorling.me \
    --cc=axboe@fb.com \
    --cc=hans.holmberg@cnexlabs.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®