From: "Christian König" <ckoenig.leichtzumerken@gmail.com>
To: helgaas@kernel.org, linux-pci@vger.kernel.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
amd-gfx@lists.freedesktop.org
Subject: [PATCH v9 4/5] x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 30h-3fh) Processors v5
Date: Wed, 18 Oct 2017 15:58:20 +0200 [thread overview]
Message-ID: <20171018135821.3248-5-deathsimple@vodafone.de> (raw)
In-Reply-To: <20171018135821.3248-1-deathsimple@vodafone.de>
From: Christian König <christian.koenig@amd.com>
Most BIOS don't enable this because of compatibility reasons.
Manually enable a 64bit BAR of 64GB size so that we have
enough room for PCI devices.
v2: style cleanups, increase size, add resource name, set correct flags,
print message that windows was added
v3: add defines for all the magic numbers, style cleanups
v4: add some comment that the BIOS should actually allow this using
_PRS and _SRS.
v5: only enable this if CONFIG_PHYS_ADDR_T_64BIT is set
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
arch/x86/pci/fixup.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 11e407489db0..7b6bd76713c5 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -618,3 +618,83 @@ static void quirk_apple_mbp_poweroff(struct pci_dev *pdev)
dev_info(dev, "can't work around MacBook Pro poweroff issue\n");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x8c10, quirk_apple_mbp_poweroff);
+
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+
+#define AMD_141b_MMIO_BASE(x) (0x80 + (x) * 0x8)
+#define AMD_141b_MMIO_BASE_RE_MASK BIT(0)
+#define AMD_141b_MMIO_BASE_WE_MASK BIT(1)
+#define AMD_141b_MMIO_BASE_MMIOBASE_MASK GENMASK(31,8)
+
+#define AMD_141b_MMIO_LIMIT(x) (0x84 + (x) * 0x8)
+#define AMD_141b_MMIO_LIMIT_MMIOLIMIT_MASK GENMASK(31,8)
+
+#define AMD_141b_MMIO_HIGH(x) (0x180 + (x) * 0x4)
+#define AMD_141b_MMIO_HIGH_MMIOBASE_MASK GENMASK(7,0)
+#define AMD_141b_MMIO_HIGH_MMIOLIMIT_SHIFT 16
+#define AMD_141b_MMIO_HIGH_MMIOLIMIT_MASK GENMASK(23,16)
+
+/*
+ * The PCI Firmware Spec, rev 3.2 notes that ACPI should optionally allow
+ * configuring host bridge windows using the _PRS and _SRS methods.
+ *
+ * But this is rarely implemented, so we manually enable a large 64bit BAR for
+ * PCIe device on AMD Family 15h (Models 30h-3fh) Processors here.
+ */
+static void pci_amd_enable_64bit_bar(struct pci_dev *dev)
+{
+ struct resource *res, *conflict;
+ u32 base, limit, high;
+ unsigned i;
+
+ for (i = 0; i < 8; ++i) {
+ pci_read_config_dword(dev, AMD_141b_MMIO_BASE(i), &base);
+ pci_read_config_dword(dev, AMD_141b_MMIO_HIGH(i), &high);
+
+ /* Is this slot free? */
+ if (!(base & (AMD_141b_MMIO_BASE_RE_MASK |
+ AMD_141b_MMIO_BASE_WE_MASK)))
+ break;
+
+ base >>= 8;
+ base |= high << 24;
+
+ /* Abort if a slot already configures a 64bit BAR. */
+ if (base > 0x10000)
+ return;
+ }
+ if (i == 8)
+ return;
+
+ res = kzalloc(sizeof(*res), GFP_KERNEL);
+ if (!res)
+ return;
+
+ res->name = "PCI Bus 0000:00";
+ res->flags = IORESOURCE_PREFETCH | IORESOURCE_MEM |
+ IORESOURCE_MEM_64 | IORESOURCE_WINDOW;
+ res->start = 0x100000000ull;
+ res->end = 0xfd00000000ull - 1;
+
+ /* Just grab the free area behind system memory for this */
+ while ((conflict = request_resource_conflict(&iomem_resource, res)))
+ res->start = conflict->end + 1;
+
+ dev_info(&dev->dev, "adding root bus resource %pR\n", res);
+
+ base = ((res->start >> 8) & AMD_141b_MMIO_BASE_MMIOBASE_MASK) |
+ AMD_141b_MMIO_BASE_RE_MASK | AMD_141b_MMIO_BASE_WE_MASK;
+ limit = ((res->end + 1) >> 8) & AMD_141b_MMIO_LIMIT_MMIOLIMIT_MASK;
+ high = ((res->start >> 40) & AMD_141b_MMIO_HIGH_MMIOBASE_MASK) |
+ ((((res->end + 1) >> 40) << AMD_141b_MMIO_HIGH_MMIOLIMIT_SHIFT)
+ & AMD_141b_MMIO_HIGH_MMIOLIMIT_MASK);
+
+ pci_write_config_dword(dev, AMD_141b_MMIO_HIGH(i), high);
+ pci_write_config_dword(dev, AMD_141b_MMIO_LIMIT(i), limit);
+ pci_write_config_dword(dev, AMD_141b_MMIO_BASE(i), base);
+
+ pci_bus_add_resource(dev->bus, res, 0);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x141b, pci_amd_enable_64bit_bar);
+
+#endif
--
2.11.0
next prev parent reply other threads:[~2017-10-18 13:59 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-18 13:58 Resizable PCI BAR support V9 Christian König
2017-10-18 13:58 ` [PATCH v9 1/5] PCI: add a define for the PCI resource type mask v2 Christian König
2017-10-18 13:58 ` [PATCH v9 2/5] PCI: add resizeable BAR infrastructure v5 Christian König
2017-10-18 13:58 ` [PATCH v9 3/5] PCI: add functionality for resizing resources v7 Christian König
2017-10-18 13:58 ` Christian König [this message]
2017-11-02 16:43 ` [PATCH v9 4/5] x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 30h-3fh) Processors v5 Alex Deucher
2017-11-20 15:51 ` Boris Ostrovsky
2017-11-20 16:07 ` Christian König
2017-11-20 16:33 ` Boris Ostrovsky
2017-11-21 13:34 ` Christian König
2017-11-21 22:26 ` Boris Ostrovsky
2017-11-22 10:09 ` Christian König
2017-11-22 16:24 ` Boris Ostrovsky
2017-11-22 16:54 ` Christian König
2017-11-22 17:27 ` Boris Ostrovsky
2017-11-23 8:11 ` Christian König
2017-11-23 14:12 ` Boris Ostrovsky
2017-11-27 18:30 ` Boris Ostrovsky
2017-11-28 9:12 ` Christian König
2017-11-28 9:46 ` [Xen-devel] " Jan Beulich
2017-11-28 10:17 ` Christian König
2017-11-28 10:53 ` Jan Beulich
2017-11-28 11:59 ` Christian König
2017-11-28 18:55 ` Boris Ostrovsky
2017-10-18 13:58 ` [PATCH v9 5/5] drm/amdgpu: resize VRAM BAR for CPU access v5 Christian König
2017-10-24 19:44 ` Resizable PCI BAR support V9 Bjorn Helgaas
2017-10-25 11:27 ` Christian König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171018135821.3248-5-deathsimple@vodafone.de \
--to=ckoenig.leichtzumerken@gmail.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=helgaas@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®