From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Nayna Jain <nayna@linux.vnet.ibm.com>
Cc: linux-integrity@vger.kernel.org, zohar@linux.vnet.ibm.com,
linux-security-module@vger.kernel.org,
linux-kernel@vger.kernel.org, peterhuewe@gmx.de,
tpmdd@selhorst.net, jgunthorpe@obsidianresearch.com,
patrickc@us.ibm.com
Subject: Re: [PATCH v4 1/4] tpm: move wait_for_tpm_stat() to respective driver files
Date: Thu, 19 Oct 2017 17:21:41 +0300 [thread overview]
Message-ID: <20171019142141.jtzilibffx4fsgmw@linux.intel.com> (raw)
In-Reply-To: <20171017203232.2262-2-nayna@linux.vnet.ibm.com>
On Tue, Oct 17, 2017 at 04:32:29PM -0400, Nayna Jain wrote:
> The function wait_for_tpm_stat() is currently defined in
> tpm-interface file. It is a hardware specific function used
> only by tpm_tis and xen-tpmfront, so it is removed from
> tpm-interface.c and defined in respective driver files.
>
> Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> ---
> drivers/char/tpm/tpm-interface.c | 60 ----------------------------------------
> drivers/char/tpm/tpm.h | 2 --
> drivers/char/tpm/tpm_tis_core.c | 60 ++++++++++++++++++++++++++++++++++++++++
> drivers/char/tpm/xen-tpmfront.c | 60 ++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 120 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
> index 1d6729be4cd6..313f7618d569 100644
> --- a/drivers/char/tpm/tpm-interface.c
> +++ b/drivers/char/tpm/tpm-interface.c
> @@ -1035,66 +1035,6 @@ int tpm_send(u32 chip_num, void *cmd, size_t buflen)
> }
> EXPORT_SYMBOL_GPL(tpm_send);
>
> -static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
> - bool check_cancel, bool *canceled)
> -{
> - u8 status = chip->ops->status(chip);
> -
> - *canceled = false;
> - if ((status & mask) == mask)
> - return true;
> - if (check_cancel && chip->ops->req_canceled(chip, status)) {
> - *canceled = true;
> - return true;
> - }
> - return false;
> -}
> -
> -int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
> - wait_queue_head_t *queue, bool check_cancel)
> -{
> - unsigned long stop;
> - long rc;
> - u8 status;
> - bool canceled = false;
> -
> - /* check current status */
> - status = chip->ops->status(chip);
> - if ((status & mask) == mask)
> - return 0;
> -
> - stop = jiffies + timeout;
> -
> - if (chip->flags & TPM_CHIP_FLAG_IRQ) {
> -again:
> - timeout = stop - jiffies;
> - if ((long)timeout <= 0)
> - return -ETIME;
> - rc = wait_event_interruptible_timeout(*queue,
> - wait_for_tpm_stat_cond(chip, mask, check_cancel,
> - &canceled),
> - timeout);
> - if (rc > 0) {
> - if (canceled)
> - return -ECANCELED;
> - return 0;
> - }
> - if (rc == -ERESTARTSYS && freezing(current)) {
> - clear_thread_flag(TIF_SIGPENDING);
> - goto again;
> - }
> - } else {
> - do {
> - tpm_msleep(TPM_TIMEOUT);
> - status = chip->ops->status(chip);
> - if ((status & mask) == mask)
> - return 0;
> - } while (time_before(jiffies, stop));
> - }
> - return -ETIME;
> -}
> -EXPORT_SYMBOL_GPL(wait_for_tpm_stat);
> -
> #define TPM_ORD_SAVESTATE 152
> #define SAVESTATE_RESULT_SIZE 10
>
> diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
> index 2d5466a72e40..4fc83ac7abeb 100644
> --- a/drivers/char/tpm/tpm.h
> +++ b/drivers/char/tpm/tpm.h
> @@ -525,8 +525,6 @@ int tpm_do_selftest(struct tpm_chip *chip);
> unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal);
> int tpm_pm_suspend(struct device *dev);
> int tpm_pm_resume(struct device *dev);
> -int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
> - wait_queue_head_t *queue, bool check_cancel);
>
> static inline void tpm_msleep(unsigned int delay_msec)
> {
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index 63bc6c3b949e..b33126a35694 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -31,6 +31,66 @@
> #include "tpm.h"
> #include "tpm_tis_core.h"
>
> +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
> + bool check_cancel, bool *canceled)
> +{
> + u8 status = chip->ops->status(chip);
> +
> + *canceled = false;
> + if ((status & mask) == mask)
> + return true;
> + if (check_cancel && chip->ops->req_canceled(chip, status)) {
> + *canceled = true;
> + return true;
> + }
> + return false;
> +}
> +
> +static int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask,
> + unsigned long timeout, wait_queue_head_t *queue,
> + bool check_cancel)
> +{
> + unsigned long stop;
> + long rc;
> + u8 status;
> + bool canceled = false;
> +
> + /* check current status */
> + status = chip->ops->status(chip);
> + if ((status & mask) == mask)
> + return 0;
> +
> + stop = jiffies + timeout;
> +
> + if (chip->flags & TPM_CHIP_FLAG_IRQ) {
> +again:
> + timeout = stop - jiffies;
> + if ((long)timeout <= 0)
> + return -ETIME;
> + rc = wait_event_interruptible_timeout(*queue,
> + wait_for_tpm_stat_cond(chip, mask, check_cancel,
> + &canceled),
> + timeout);
> + if (rc > 0) {
> + if (canceled)
> + return -ECANCELED;
> + return 0;
> + }
> + if (rc == -ERESTARTSYS && freezing(current)) {
> + clear_thread_flag(TIF_SIGPENDING);
> + goto again;
> + }
> + } else {
> + do {
> + tpm_msleep(TPM_TIMEOUT);
> + status = chip->ops->status(chip);
> + if ((status & mask) == mask)
> + return 0;
> + } while (time_before(jiffies, stop));
> + }
> + return -ETIME;
> +}
> +
> /* Before we attempt to access the TPM we must see that the valid bit is set.
> * The specification says that this bit is 0 at reset and remains 0 until the
> * 'TPM has gone through its self test and initialization and has established
> diff --git a/drivers/char/tpm/xen-tpmfront.c b/drivers/char/tpm/xen-tpmfront.c
> index 656e8af95d52..d20a0a9ded27 100644
> --- a/drivers/char/tpm/xen-tpmfront.c
> +++ b/drivers/char/tpm/xen-tpmfront.c
> @@ -39,6 +39,66 @@ enum status_bits {
> VTPM_STATUS_CANCELED = 0x8,
> };
>
> +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
> + bool check_cancel, bool *canceled)
> +{
> + u8 status = chip->ops->status(chip);
> +
> + *canceled = false;
> + if ((status & mask) == mask)
> + return true;
> + if (check_cancel && chip->ops->req_canceled(chip, status)) {
> + *canceled = true;
> + return true;
> + }
> + return false;
> +}
> +
> +static int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask,
> + unsigned long timeout, wait_queue_head_t *queue,
> + bool check_cancel)
> +{
> + unsigned long stop;
> + long rc;
> + u8 status;
> + bool canceled = false;
> +
> + /* check current status */
> + status = chip->ops->status(chip);
> + if ((status & mask) == mask)
> + return 0;
> +
> + stop = jiffies + timeout;
> +
> + if (chip->flags & TPM_CHIP_FLAG_IRQ) {
> +again:
> + timeout = stop - jiffies;
> + if ((long)timeout <= 0)
> + return -ETIME;
> + rc = wait_event_interruptible_timeout(*queue,
> + wait_for_tpm_stat_cond(chip, mask, check_cancel,
> + &canceled),
> + timeout);
> + if (rc > 0) {
> + if (canceled)
> + return -ECANCELED;
> + return 0;
> + }
> + if (rc == -ERESTARTSYS && freezing(current)) {
> + clear_thread_flag(TIF_SIGPENDING);
> + goto again;
> + }
> + } else {
> + do {
> + tpm_msleep(TPM_TIMEOUT);
> + status = chip->ops->status(chip);
> + if ((status & mask) == mask)
> + return 0;
> + } while (time_before(jiffies, stop));
> + }
> + return -ETIME;
> +}
> +
> static u8 vtpm_status(struct tpm_chip *chip)
> {
> struct tpm_private *priv = dev_get_drvdata(&chip->dev);
> --
> 2.13.3
>
This commit caused a compiler warning because freezer.h was not included
to xen-tpmfront.c. I manually fixed it.
Reviewed-by: Jarkko Sakkinen <jarkkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkkko.sakkinen@linux.intel.com>
/Jarkko
next prev parent reply other threads:[~2017-10-19 14:21 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-17 20:32 [PATCH v4 0/4] additional TPM performance improvements Nayna Jain
2017-10-17 20:32 ` [PATCH v4 1/4] tpm: move wait_for_tpm_stat() to respective driver files Nayna Jain
2017-10-19 14:21 ` Jarkko Sakkinen [this message]
2017-10-19 17:00 ` Alexander.Steffen
2017-10-20 8:56 ` Jarkko Sakkinen
2017-10-23 13:32 ` Nayna Jain
2017-10-24 13:45 ` Jarkko Sakkinen
2017-10-17 20:32 ` [PATCH v4 2/4] tpm: ignore burstcount to improve tpm_tis send() performance Nayna Jain
2017-10-18 15:25 ` Jarkko Sakkinen
2017-10-19 14:23 ` Jarkko Sakkinen
2017-10-20 14:42 ` Alexander.Steffen
2017-10-23 2:57 ` Jarkko Sakkinen
2017-11-07 18:29 ` Nayna Jain
2017-11-08 11:32 ` Alexander.Steffen
2017-11-16 14:34 ` Alexander.Steffen
2017-11-22 6:52 ` Alexander.Steffen
2017-11-23 14:47 ` Nayna Jain
2017-11-23 16:19 ` Alexander.Steffen
2017-11-26 15:22 ` Jarkko Sakkinen
2017-11-26 16:37 ` Mimi Zohar
2017-11-27 7:08 ` Leendert van Doorn
2017-11-27 13:22 ` Mimi Zohar
2017-11-28 20:19 ` Jarkko Sakkinen
2017-10-17 20:32 ` [PATCH v4 3/4] tpm: reduce tpm polling delay in tpm_tis_core Nayna Jain
2017-10-18 15:24 ` Jarkko Sakkinen
2017-10-19 14:22 ` Jarkko Sakkinen
2017-10-17 20:32 ` [PATCH v4 4/4] tpm: use tpm_msleep() value as max delay Nayna Jain
2017-10-19 14:22 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171019142141.jtzilibffx4fsgmw@linux.intel.com \
--to=jarkko.sakkinen@linux.intel.com \
--cc=jgunthorpe@obsidianresearch.com \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=nayna@linux.vnet.ibm.com \
--cc=patrickc@us.ibm.com \
--cc=peterhuewe@gmx.de \
--cc=tpmdd@selhorst.net \
--cc=zohar@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome