mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"stable@vger.kernel.org" <stable@vger.kernel.org>
Cc: Alison Schofield <amsfield22@gmail.com>,
	Jonathan Cameron <jic23@kernel.org>,
	"Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
Subject: [PATCH AUTOSEL for 4.4 13/25] iio: trigger: free trigger resource correctly
Date: Wed, 25 Oct 2017 01:56:16 +0000	[thread overview]
Message-ID: <20171025015607.24625-13-alexander.levin@verizon.com> (raw)
In-Reply-To: <20171025015607.24625-1-alexander.levin@verizon.com>

From: Alison Schofield <amsfield22@gmail.com>

[ Upstream commit 10e840dfb0b7fc345082dd9e5fff3c1c02e7690e ]

These stand-alone trigger drivers were using iio_trigger_put()
where they should have been using iio_trigger_free().  The
iio_trigger_put() adds a module_put which is bad since they
never did a module_get.

In the sysfs driver, module_get/put's are used as triggers are
added & removed. This extra module_put() occurs on an error path
in the probe routine (probably rare).

In the bfin-timer & interrupt trigger drivers, the module resources
are not explicitly managed, so it's doing a put on something that
was never get'd.  It occurs on the probe error path and on the
remove path (not so rare).

Tested with the sysfs trigger driver.
The bfin & interrupt drivers were build tested & inspected only.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/iio/trigger/iio-trig-interrupt.c          | 8 ++++----
 drivers/iio/trigger/iio-trig-sysfs.c              | 2 +-
 drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/trigger/iio-trig-interrupt.c b/drivers/iio/trigger/iio-trig-interrupt.c
index 572bc6f02ca8..e18f12b74610 100644
--- a/drivers/iio/trigger/iio-trig-interrupt.c
+++ b/drivers/iio/trigger/iio-trig-interrupt.c
@@ -58,7 +58,7 @@ static int iio_interrupt_trigger_probe(struct platform_device *pdev)
 	trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL);
 	if (!trig_info) {
 		ret = -ENOMEM;
-		goto error_put_trigger;
+		goto error_free_trigger;
 	}
 	iio_trigger_set_drvdata(trig, trig_info);
 	trig_info->irq = irq;
@@ -83,8 +83,8 @@ error_release_irq:
 	free_irq(irq, trig);
 error_free_trig_info:
 	kfree(trig_info);
-error_put_trigger:
-	iio_trigger_put(trig);
+error_free_trigger:
+	iio_trigger_free(trig);
 error_ret:
 	return ret;
 }
@@ -99,7 +99,7 @@ static int iio_interrupt_trigger_remove(struct platform_device *pdev)
 	iio_trigger_unregister(trig);
 	free_irq(trig_info->irq, trig);
 	kfree(trig_info);
-	iio_trigger_put(trig);
+	iio_trigger_free(trig);
 
 	return 0;
 }
diff --git a/drivers/iio/trigger/iio-trig-sysfs.c b/drivers/iio/trigger/iio-trig-sysfs.c
index 3dfab2bc6d69..202e8b89caf2 100644
--- a/drivers/iio/trigger/iio-trig-sysfs.c
+++ b/drivers/iio/trigger/iio-trig-sysfs.c
@@ -174,7 +174,7 @@ static int iio_sysfs_trigger_probe(int id)
 	return 0;
 
 out2:
-	iio_trigger_put(t->trig);
+	iio_trigger_free(t->trig);
 free_t:
 	kfree(t);
 out1:
diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
index 035dd456d7d6..737747354db6 100644
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
+++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
@@ -259,7 +259,7 @@ out_free_irq:
 out1:
 	iio_trigger_unregister(st->trig);
 out:
-	iio_trigger_put(st->trig);
+	iio_trigger_free(st->trig);
 	return ret;
 }
 
@@ -272,7 +272,7 @@ static int iio_bfin_tmr_trigger_remove(struct platform_device *pdev)
 		peripheral_free(st->t->pin);
 	free_irq(st->irq, st);
 	iio_trigger_unregister(st->trig);
-	iio_trigger_put(st->trig);
+	iio_trigger_free(st->trig);
 
 	return 0;
 }
-- 
2.11.0

  parent reply	other threads:[~2017-10-25  1:59 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-25  1:56 [PATCH AUTOSEL for 4.4 01/25] [media] adv7604: Initialize drive strength to default when using DT Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 02/25] video: fbdev: pmag-ba-fb: Remove bad `__init' annotation Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 03/25] PCI: mvebu: Handle changes to the bridge windows while enabled Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 06/25] dt-bindings: clockgen: Add compatible string for LS1012A Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 07/25] drm: drm_minor_register(): Clean up debugfs on failure Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 05/25] ARM: dts: imx53-qsb-common: fix FEC pinmux config Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 04/25] xen/netback: set default upper limit of tx/rx queues to 8 Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 10/25] powerpc/corenet: explicitly disable the SDHC controller on kmcoge4 Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 11/25] ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 09/25] iommu/arm-smmu-v3: Clear prior settings when updating STEs Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 08/25] KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 12/25] crypto: vmx - disable preemption to enable vsx in aes_ctr.c Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` Levin, Alexander (Sasha Levin) [this message]
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 14/25] dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 15/25] dt-bindings: Add vendor prefix for LEGO Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 16/25] phy: increase size of MII_BUS_ID_SIZE and bus_id Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 18/25] usb: hcd: initialize hcd->flags to 0 when rm hcd Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 20/25] IPsec: do not ignore crypto err in ah4 input Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 17/25] serial: sh-sci: Fix register offsets for the IRDA serial port Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 19/25] netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 21/25] Input: mpr121 - handle multiple bits change of status register Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 24/25] s390/qeth: issue STARTLAN as first IPA command Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 22/25] Input: mpr121 - set missing event capability Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 23/25] IB/ipoib: Change list_del to list_del_init in the tx object Levin, Alexander (Sasha Levin)
2017-10-25  1:56 ` [PATCH AUTOSEL for 4.4 25/25] net: dsa: select NET_SWITCHDEV Levin, Alexander (Sasha Levin)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171025015607.24625-13-alexander.levin@verizon.com \
    --to=alexander.levin@verizon.com \
    --cc=amsfield22@gmail.com \
    --cc=jic23@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®