From: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"stable@vger.kernel.org" <stable@vger.kernel.org>
Cc: Patrick Bruenn <p.bruenn@beckhoff.com>,
Shawn Guo <shawnguo@kernel.org>,
"Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
Subject: [PATCH AUTOSEL for 4.4 05/25] ARM: dts: imx53-qsb-common: fix FEC pinmux config
Date: Wed, 25 Oct 2017 01:56:14 +0000 [thread overview]
Message-ID: <20171025015607.24625-5-alexander.levin@verizon.com> (raw)
In-Reply-To: <20171025015607.24625-1-alexander.levin@verizon.com>
From: Patrick Bruenn <p.bruenn@beckhoff.com>
[ Upstream commit 8b649e426336d7d4800ff9c82858328f4215ba01 ]
The pinmux configuration in device tree was different from manual
muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c
All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the
bootloader already did the correct pinmuxing for us.
But recently u-boot is migrating to reuse device tree files from the
kernel tree, so it seems to be better to have the correct pinmuxing in
our files, too.
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
arch/arm/boot/dts/imx53-qsb-common.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 53fd75c8ffcf..2eeafbf5235f 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -215,16 +215,16 @@
pinctrl_fec: fecgrp {
fsl,pins = <
- MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ MX53_PAD_FEC_MDC__FEC_MDC 0x4
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
>;
};
--
2.11.0
next prev parent reply other threads:[~2017-10-25 1:58 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 1:56 [PATCH AUTOSEL for 4.4 01/25] [media] adv7604: Initialize drive strength to default when using DT Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 03/25] PCI: mvebu: Handle changes to the bridge windows while enabled Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 02/25] video: fbdev: pmag-ba-fb: Remove bad `__init' annotation Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 04/25] xen/netback: set default upper limit of tx/rx queues to 8 Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 07/25] drm: drm_minor_register(): Clean up debugfs on failure Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` Levin, Alexander (Sasha Levin) [this message]
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 06/25] dt-bindings: clockgen: Add compatible string for LS1012A Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 11/25] ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 08/25] KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 09/25] iommu/arm-smmu-v3: Clear prior settings when updating STEs Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 10/25] powerpc/corenet: explicitly disable the SDHC controller on kmcoge4 Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 15/25] dt-bindings: Add vendor prefix for LEGO Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 16/25] phy: increase size of MII_BUS_ID_SIZE and bus_id Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 13/25] iio: trigger: free trigger resource correctly Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 12/25] crypto: vmx - disable preemption to enable vsx in aes_ctr.c Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 14/25] dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 19/25] netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 20/25] IPsec: do not ignore crypto err in ah4 input Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 17/25] serial: sh-sci: Fix register offsets for the IRDA serial port Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 18/25] usb: hcd: initialize hcd->flags to 0 when rm hcd Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 23/25] IB/ipoib: Change list_del to list_del_init in the tx object Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 21/25] Input: mpr121 - handle multiple bits change of status register Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 24/25] s390/qeth: issue STARTLAN as first IPA command Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 22/25] Input: mpr121 - set missing event capability Levin, Alexander (Sasha Levin)
2017-10-25 1:56 ` [PATCH AUTOSEL for 4.4 25/25] net: dsa: select NET_SWITCHDEV Levin, Alexander (Sasha Levin)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171025015607.24625-5-alexander.levin@verizon.com \
--to=alexander.levin@verizon.com \
--cc=linux-kernel@vger.kernel.org \
--cc=p.bruenn@beckhoff.com \
--cc=shawnguo@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®