[PATCH AUTOSEL for 3.18 01/15] video: fbdev: pmag-ba-fb: Remove bad `__init' annotation

[PATCH AUTOSEL for 3.18 01/15] video: fbdev: pmag-ba-fb: Remove bad `__init' annotation

[Levin, Alexander (Sasha Levin)]

From: "Maciej W. Rozycki" <macro@linux-mips.org>

[ Upstream commit 879e5a0df626f39cbb3c61bb90373e56d67012c4 ]

Fix:

WARNING: drivers/video/fbdev/pmag-ba-fb.o(.text+0x308): Section mismatch in reference from the function pmagbafb_probe() to the function .init.text:pmagbafb_erase_cursor()
The function pmagbafb_probe()
references the function __init pmagbafb_erase_cursor().
This is often because pmagbafb_probe lacks a __init
annotation or the annotation of pmagbafb_erase_cursor is wrong.

-- a fallout from a missed update from commit 9625b51350cc ("VIDEO:
PMAG-BA: Fix section mismatch") and then commit 48c68c4f1b54 ("Drivers:
video: remove __dev* attributes.")

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/video/fbdev/pmag-ba-fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/pmag-ba-fb.c b/drivers/video/fbdev/pmag-ba-fb.c
index 914a52ba8477..77837665ce89 100644
--- a/drivers/video/fbdev/pmag-ba-fb.c
+++ b/drivers/video/fbdev/pmag-ba-fb.c
@@ -129,7 +129,7 @@ static struct fb_ops pmagbafb_ops = {
 /*
  * Turn the hardware cursor off.
  */
-static void __init pmagbafb_erase_cursor(struct fb_info *info)
+static void pmagbafb_erase_cursor(struct fb_info *info)
 {
 	struct pmagbafb_par *par = info->par;
 
-- 
2.11.0

[PATCH AUTOSEL for 3.18 02/15] xen/netback: set default upper limit of tx/rx queues to 8

[Levin, Alexander (Sasha Levin)]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 56dd5af9bc23d0d5d23bb207c477715b4c2216c5 ]

The default for the maximum number of tx/rx queues of one interface is
the number of cpus of the system today. As each queue pair reserves 512
grant pages this default consumes a ridiculous number of grants for
large guests.

Limit the queue number to 8 as default. This value can be modified
via a module parameter if required.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/xen-netback/netback.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 7a85ff54a39f..50b7731025c1 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -67,6 +67,7 @@ module_param(rx_drain_timeout_msecs, uint, 0444);
 unsigned int rx_stall_timeout_msecs = 60000;
 module_param(rx_stall_timeout_msecs, uint, 0444);
 
+#define MAX_QUEUES_DEFAULT 8
 unsigned int xenvif_max_queues;
 module_param_named(max_queues, xenvif_max_queues, uint, 0644);
 MODULE_PARM_DESC(max_queues,
@@ -2189,11 +2190,12 @@ static int __init netback_init(void)
 	if (!xen_domain())
 		return -ENODEV;
 
-	/* Allow as many queues as there are CPUs if user has not
+	/* Allow as many queues as there are CPUs but max. 8 if user has not
 	 * specified a value.
 	 */
 	if (xenvif_max_queues == 0)
-		xenvif_max_queues = num_online_cpus();
+		xenvif_max_queues = min_t(unsigned int, MAX_QUEUES_DEFAULT,
+					  num_online_cpus());
 
 	if (fatal_skb_slots < XEN_NETBK_LEGACY_SLOTS_MAX) {
 		pr_info("fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n",
-- 
2.11.0

[PATCH AUTOSEL for 3.18 04/15] drm: drm_minor_register(): Clean up debugfs on failure

[Levin, Alexander (Sasha Levin)]

From: Noralf Trønnes <noralf@tronnes.org>

[ Upstream commit a67834f8bfa1e2f48bb27d07b9a552ba7c3af82a ]

Call drm_debugfs_cleanup() in case drm_debugfs_init() fails to
cover for failure in the drm_driver.debugfs_init callback.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-3-noralf@tronnes.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/gpu/drm/drm_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index bc3da32d4585..72a71fa72653 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -320,7 +320,7 @@ static int drm_minor_register(struct drm_device *dev, unsigned int type)
 	ret = drm_debugfs_init(minor, minor->index, drm_debugfs_root);
 	if (ret) {
 		DRM_ERROR("DRM: Failed to initialize /sys/kernel/debug/dri.\n");
-		return ret;
+		goto err_debugfs;
 	}
 
 	ret = device_add(minor->kdev);
-- 
2.11.0

[PATCH AUTOSEL for 3.18 03/15] ARM: dts: imx53-qsb-common: fix FEC pinmux config

[Levin, Alexander (Sasha Levin)]

From: Patrick Bruenn <p.bruenn@beckhoff.com>

[ Upstream commit 8b649e426336d7d4800ff9c82858328f4215ba01 ]

The pinmux configuration in device tree was different from manual
muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c
All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the
bootloader already did the correct pinmuxing for us.
But recently u-boot is migrating to reuse device tree files from the
kernel tree, so it seems to be better to have the correct pinmuxing in
our files, too.

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/arm/boot/dts/imx53-qsb-common.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 1f55187ed9ce..53e81589368a 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -215,16 +215,16 @@
 
 		pinctrl_fec: fecgrp {
 			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+				MX53_PAD_FEC_MDC__FEC_MDC		0x4
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
 			>;
 		};
 
-- 
2.11.0

[PATCH AUTOSEL for 3.18 05/15] ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6

[Levin, Alexander (Sasha Levin)]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 4cd6a59f5c1a9b0cca0da09fbba42b9450ffc899 ]

We have more than four uarts on some SoCs and that can cause
noise with errors while booting.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/arm/configs/omap2plus_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index a0e51bb68b2d..85128b297ec1 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -169,6 +169,7 @@ CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-- 
2.11.0

[PATCH AUTOSEL for 3.18 06/15] iio: trigger: free trigger resource correctly

[Levin, Alexander (Sasha Levin)]

From: Alison Schofield <amsfield22@gmail.com>

[ Upstream commit 10e840dfb0b7fc345082dd9e5fff3c1c02e7690e ]

These stand-alone trigger drivers were using iio_trigger_put()
where they should have been using iio_trigger_free().  The
iio_trigger_put() adds a module_put which is bad since they
never did a module_get.

In the sysfs driver, module_get/put's are used as triggers are
added & removed. This extra module_put() occurs on an error path
in the probe routine (probably rare).

In the bfin-timer & interrupt trigger drivers, the module resources
are not explicitly managed, so it's doing a put on something that
was never get'd.  It occurs on the probe error path and on the
remove path (not so rare).

Tested with the sysfs trigger driver.
The bfin & interrupt drivers were build tested & inspected only.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/iio/trigger/iio-trig-interrupt.c          | 8 ++++----
 drivers/iio/trigger/iio-trig-sysfs.c              | 2 +-
 drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/trigger/iio-trig-interrupt.c b/drivers/iio/trigger/iio-trig-interrupt.c
index 572bc6f02ca8..e18f12b74610 100644
--- a/drivers/iio/trigger/iio-trig-interrupt.c
+++ b/drivers/iio/trigger/iio-trig-interrupt.c
@@ -58,7 +58,7 @@ static int iio_interrupt_trigger_probe(struct platform_device *pdev)
 	trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL);
 	if (!trig_info) {
 		ret = -ENOMEM;
-		goto error_put_trigger;
+		goto error_free_trigger;
 	}
 	iio_trigger_set_drvdata(trig, trig_info);
 	trig_info->irq = irq;
@@ -83,8 +83,8 @@ error_release_irq:
 	free_irq(irq, trig);
 error_free_trig_info:
 	kfree(trig_info);
-error_put_trigger:
-	iio_trigger_put(trig);
+error_free_trigger:
+	iio_trigger_free(trig);
 error_ret:
 	return ret;
 }
@@ -99,7 +99,7 @@ static int iio_interrupt_trigger_remove(struct platform_device *pdev)
 	iio_trigger_unregister(trig);
 	free_irq(trig_info->irq, trig);
 	kfree(trig_info);
-	iio_trigger_put(trig);
+	iio_trigger_free(trig);
 
 	return 0;
 }
diff --git a/drivers/iio/trigger/iio-trig-sysfs.c b/drivers/iio/trigger/iio-trig-sysfs.c
index 254c7e906127..61ffbec048a7 100644
--- a/drivers/iio/trigger/iio-trig-sysfs.c
+++ b/drivers/iio/trigger/iio-trig-sysfs.c
@@ -173,7 +173,7 @@ static int iio_sysfs_trigger_probe(int id)
 	return 0;
 
 out2:
-	iio_trigger_put(t->trig);
+	iio_trigger_free(t->trig);
 free_t:
 	kfree(t);
 out1:
diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
index a21b7c514776..b412f567a9c1 100644
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
+++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
@@ -258,7 +258,7 @@ out_free_irq:
 out1:
 	iio_trigger_unregister(st->trig);
 out:
-	iio_trigger_put(st->trig);
+	iio_trigger_free(st->trig);
 	return ret;
 }
 
@@ -271,7 +271,7 @@ static int iio_bfin_tmr_trigger_remove(struct platform_device *pdev)
 		peripheral_free(st->t->pin);
 	free_irq(st->irq, st);
 	iio_trigger_unregister(st->trig);
-	iio_trigger_put(st->trig);
+	iio_trigger_free(st->trig);
 
 	return 0;
 }
-- 
2.11.0

[PATCH AUTOSEL for 3.18 08/15] dt-bindings: Add vendor prefix for LEGO

[Levin, Alexander (Sasha Levin)]

From: David Lechner <david@lechnology.com>

[ Upstream commit 7dcc31e2e68a386a29070384b51683ece80982bf ]

Add a vendor prefix for LEGO Systems A/S

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index a344ec2713a5..356ffd64fc9e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -83,6 +83,7 @@ karo	Ka-Ro electronics GmbH
 keymile	Keymile GmbH
 lacie	LaCie
 lantiq	Lantiq Semiconductor
+lego	LEGO Systems A/S
 lenovo	Lenovo Group Ltd.
 lg	LG Corporation
 linux	Linux-specific binding
-- 
2.11.0

[PATCH AUTOSEL for 3.18 09/15] phy: increase size of MII_BUS_ID_SIZE and bus_id

[Levin, Alexander (Sasha Levin)]

From: Volodymyr Bendiuga <volodymyr.bendiuga@gmail.com>

[ Upstream commit 4567d686f5c6d955e57a3afa1741944c1e7f4033 ]

Some bus names are pretty long and do not fit into
17 chars. Increase therefore MII_BUS_ID_SIZE and
phy_fixup.bus_id to larger number. Now mii_bus.id
can host larger name.

Signed-off-by: Volodymyr Bendiuga <volodymyr.bendiuga@gmail.com>
Signed-off-by: Magnus Öberg <magnus.oberg@westermo.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 include/linux/phy.h | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/include/linux/phy.h b/include/linux/phy.h
index fbdacd1278e3..bc79f855fc32 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -135,11 +135,7 @@ static inline const char *phy_modes(phy_interface_t interface)
 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */
 #define PHY_ID_FMT "%s:%02x"
 
-/*
- * Need to be a little smaller than phydev->dev.bus_id to leave room
- * for the ":%02x"
- */
-#define MII_BUS_ID_SIZE	(20 - 3)
+#define MII_BUS_ID_SIZE	61
 
 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
    IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
@@ -573,7 +569,7 @@ struct phy_driver {
 /* A Structure for boards to register fixups with the PHY Lib */
 struct phy_fixup {
 	struct list_head list;
-	char bus_id[20];
+	char bus_id[MII_BUS_ID_SIZE + 3];
 	u32 phy_uid;
 	u32 phy_uid_mask;
 	int (*run)(struct phy_device *phydev);
-- 
2.11.0

[PATCH AUTOSEL for 3.18 07/15] dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification

[Levin, Alexander (Sasha Levin)]

From: David Lechner <david@lechnology.com>

[ Upstream commit 21078ab174c99885ca83a5c32db0d33b1617745e ]

This adds the board level device tree specification for LEGO MINDSTORMS EV3

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 Documentation/devicetree/bindings/arm/davinci.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/davinci.txt b/Documentation/devicetree/bindings/arm/davinci.txt
index cfaeda4274e6..e6f4b50da1f9 100644
--- a/Documentation/devicetree/bindings/arm/davinci.txt
+++ b/Documentation/devicetree/bindings/arm/davinci.txt
@@ -9,6 +9,10 @@ EnBW AM1808 based CMC board
 Required root node properties:
     - compatible = "enbw,cmc", "ti,da850;
 
+LEGO MINDSTORMS EV3 (AM1808 based)
+Required root node properties:
+    - compatible = "lego,ev3", "ti,da850";
+
 Generic DaVinci Boards
 ----------------------
 
-- 
2.11.0

[PATCH AUTOSEL for 3.18 10/15] serial: sh-sci: Fix register offsets for the IRDA serial port

[Levin, Alexander (Sasha Levin)]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

[ Upstream commit a752ba18af8285e3eeda572f40dddaebff0c3621 ]

Even though most of its registers are 8-bit wide, the IRDA has two
16-bit registers that make it a 16-bit peripheral and not a 8-bit
peripheral with addresses shifted by one. Fix the registers offset in
the driver and the platform data regshift value.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/sh/kernel/cpu/sh3/setup-sh770x.c |  1 -
 drivers/tty/serial/sh-sci.c           | 17 ++++++++---------
 2 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index 538c10db3537..8dc315b212c2 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -165,7 +165,6 @@ static struct plat_sci_port scif2_platform_data = {
 	.scscr		= SCSCR_TE | SCSCR_RE,
 	.type		= PORT_IRDA,
 	.ops		= &sh770x_sci_port_ops,
-	.regshift	= 1,
 };
 
 static struct resource scif2_resources[] = {
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index f6c7f043c176..118d998f6ff6 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -171,18 +171,17 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 	},
 
 	/*
-	 * Common definitions for legacy IrDA ports, dependent on
-	 * regshift value.
+	 * Common definitions for legacy IrDA ports.
 	 */
 	[SCIx_IRDA_REGTYPE] = {
 		[SCSMR]		= { 0x00,  8 },
-		[SCBRR]		= { 0x01,  8 },
-		[SCSCR]		= { 0x02,  8 },
-		[SCxTDR]	= { 0x03,  8 },
-		[SCxSR]		= { 0x04,  8 },
-		[SCxRDR]	= { 0x05,  8 },
-		[SCFCR]		= { 0x06,  8 },
-		[SCFDR]		= { 0x07, 16 },
+		[SCBRR]		= { 0x02,  8 },
+		[SCSCR]		= { 0x04,  8 },
+		[SCxTDR]	= { 0x06,  8 },
+		[SCxSR]		= { 0x08, 16 },
+		[SCxRDR]	= { 0x0a,  8 },
+		[SCFCR]		= { 0x0c,  8 },
+		[SCFDR]		= { 0x0e, 16 },
 		[SCTFDR]	= sci_reg_invalid,
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
-- 
2.11.0

[PATCH AUTOSEL for 3.18 13/15] Input: mpr121 - handle multiple bits change of status register

[Levin, Alexander (Sasha Levin)]

From: Akinobu Mita <akinobu.mita@gmail.com>

[ Upstream commit 08fea55e37f58371bffc5336a59e55d1f155955a ]

This driver reports input events on their interrupts which are triggered
by the sensor's status register changes.  But only single bit change is
reported in the interrupt handler.  So if there are multiple bits are
changed at almost the same time, other press or release events are ignored.

This fixes it by detecting all changed bits in the status register.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/input/keyboard/mpr121_touchkey.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
index 009c82256e89..3dbc7e611791 100644
--- a/drivers/input/keyboard/mpr121_touchkey.c
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -87,7 +87,8 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
 	struct mpr121_touchkey *mpr121 = dev_id;
 	struct i2c_client *client = mpr121->client;
 	struct input_dev *input = mpr121->input_dev;
-	unsigned int key_num, key_val, pressed;
+	unsigned long bit_changed;
+	unsigned int key_num;
 	int reg;
 
 	reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR);
@@ -105,18 +106,22 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
 
 	reg &= TOUCH_STATUS_MASK;
 	/* use old press bit to figure out which bit changed */
-	key_num = ffs(reg ^ mpr121->statusbits) - 1;
-	pressed = reg & (1 << key_num);
+	bit_changed = reg ^ mpr121->statusbits;
 	mpr121->statusbits = reg;
+	for_each_set_bit(key_num, &bit_changed, mpr121->keycount) {
+		unsigned int key_val, pressed;
 
-	key_val = mpr121->keycodes[key_num];
+		pressed = reg & BIT(key_num);
+		key_val = mpr121->keycodes[key_num];
 
-	input_event(input, EV_MSC, MSC_SCAN, key_num);
-	input_report_key(input, key_val, pressed);
-	input_sync(input);
+		input_event(input, EV_MSC, MSC_SCAN, key_num);
+		input_report_key(input, key_val, pressed);
+
+		dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
+			pressed ? "pressed" : "released");
 
-	dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
-		pressed ? "pressed" : "released");
+	}
+	input_sync(input);
 
 out:
 	return IRQ_HANDLED;
-- 
2.11.0

[PATCH AUTOSEL for 3.18 14/15] Input: mpr121 - set missing event capability

[Levin, Alexander (Sasha Levin)]

From: Akinobu Mita <akinobu.mita@gmail.com>

[ Upstream commit 9723ddc8fe0d76ce41fe0dc16afb241ec7d0a29d ]

This driver reports misc scan input events on the sensor's status
register changes.  But the event capability for them was not set in the
device initialization, so these events were ignored.

This change adds the missing event capability.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/input/keyboard/mpr121_touchkey.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
index 3dbc7e611791..671d202a94fa 100644
--- a/drivers/input/keyboard/mpr121_touchkey.c
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -235,6 +235,7 @@ static int mpr_touchkey_probe(struct i2c_client *client,
 	input_dev->id.bustype = BUS_I2C;
 	input_dev->dev.parent = &client->dev;
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
 	input_dev->keycode = mpr121->keycodes;
 	input_dev->keycodesize = sizeof(mpr121->keycodes[0]);
-- 
2.11.0

[PATCH AUTOSEL for 3.18 11/15] usb: hcd: initialize hcd->flags to 0 when rm hcd

[Levin, Alexander (Sasha Levin)]

From: William wu <wulf@rock-chips.com>

[ Upstream commit 76b8db0d480e8045e1a1902fc9ab143b3b9ef115 ]

On some platforms(e.g. rk3399 board), we can call hcd_add/remove
consecutively without calling usb_put_hcd/usb_create_hcd in between,
so hcd->flags can be stale.

If the HC dies due to whatever reason then without this patch we get
the below error on next hcd_add.

[173.296154] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up
[173.296209] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[173.296762] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6
[173.296931] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[173.297179] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[173.297203] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[173.297222] usb usb6: Product: xHCI Host Controller
[173.297240] usb usb6: Manufacturer: Linux 4.4.21 xhci-hcd
[173.297257] usb usb6: SerialNumber: xhci-hcd.2.auto
[173.298680] hub 6-0:1.0: USB hub found
[173.298749] hub 6-0:1.0: 1 port detected
[173.299382] rockchip-dwc3 usb@fe800000: USB HOST connected
[173.395418] hub 5-0:1.0: activate --> -19
[173.603447] irq 228: nobody cared (try booting with the "irqpoll" option)
[173.603493] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.21 #9
[173.603513] Hardware name: Google Kevin (DT)
[173.603531] Call trace:
[173.603568] [<ffffffc0002087dc>] dump_backtrace+0x0/0x160
[173.603596] [<ffffffc00020895c>] show_stack+0x20/0x28
[173.603623] [<ffffffc0004b28a8>] dump_stack+0x90/0xb0
[173.603650] [<ffffffc00027347c>] __report_bad_irq+0x48/0xe8
[173.603674] [<ffffffc0002737cc>] note_interrupt+0x1e8/0x28c
[173.603698] [<ffffffc000270a38>] handle_irq_event_percpu+0x1d4/0x25c
[173.603722] [<ffffffc000270b0c>] handle_irq_event+0x4c/0x7c
[173.603748] [<ffffffc00027456c>] handle_fasteoi_irq+0xb4/0x124
[173.603777] [<ffffffc00026fe3c>] generic_handle_irq+0x30/0x44
[173.603804] [<ffffffc0002701a8>] __handle_domain_irq+0x90/0xbc
[173.603827] [<ffffffc0002006f4>] gic_handle_irq+0xcc/0x188
...
[173.604500] [<ffffffc000203700>] el1_irq+0x80/0xf8
[173.604530] [<ffffffc000261388>] cpu_startup_entry+0x38/0x3cc
[173.604558] [<ffffffc00090f7d8>] rest_init+0x8c/0x94
[173.604585] [<ffffffc000e009ac>] start_kernel+0x3d0/0x3fc
[173.604607] [<0000000000b16000>] 0xb16000
[173.604622] handlers:
[173.604648] [<ffffffc000642084>] usb_hcd_irq
[173.604673] Disabling IRQ #228

Signed-off-by: William wu <wulf@rock-chips.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/usb/core/hcd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 826b8fb9eb59..d7203fd67f2a 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2927,6 +2927,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 	}
 
 	usb_put_invalidate_rhdev(hcd);
+	hcd->flags = 0;
 }
 EXPORT_SYMBOL_GPL(usb_remove_hcd);
 
-- 
2.11.0

[PATCH AUTOSEL for 3.18 12/15] IPsec: do not ignore crypto err in ah4 input

[Levin, Alexander (Sasha Levin)]

From: Gilad Ben-Yossef <gilad@benyossef.com>

[ Upstream commit ebd89a2d0675f1325c2be5b7576fd8cb7e8defd0 ]

ah4 input processing uses the asynchronous hash crypto API which
supplies an error code as part of the operation completion but
the error code was being ignored.

Treat a crypto API error indication as a verification failure.

While a crypto API reported error would almost certainly result
in a memcpy of the digest failing anyway and thus the security
risk seems minor, performing a memory compare on what might be
uninitialized memory is wrong.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/ipv4/ah4.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c
index ac9a32ec3ee4..0157f09c0de9 100644
--- a/net/ipv4/ah4.c
+++ b/net/ipv4/ah4.c
@@ -270,6 +270,9 @@ static void ah_input_done(struct crypto_async_request *base, int err)
 	int ihl = ip_hdrlen(skb);
 	int ah_hlen = (ah->hdrlen + 2) << 2;
 
+	if (err)
+		goto out;
+
 	work_iph = AH_SKB_CB(skb)->tmp;
 	auth_data = ah_tmp_auth(work_iph, ihl);
 	icv = ah_tmp_icv(ahp->ahash, auth_data, ahp->icv_trunc_len);
-- 
2.11.0

[PATCH AUTOSEL for 3.18 15/15] IB/ipoib: Change list_del to list_del_init in the tx object

[Levin, Alexander (Sasha Levin)]

From: Feras Daoud <ferasda@mellanox.com>

[ Upstream commit 27d41d29c7f093f6f77843624fbb080c1b4a8b9c ]

Since ipoib_cm_tx_start function and ipoib_cm_tx_reap function
belong to different work queues, they can run in parallel.
In this case if ipoib_cm_tx_reap calls list_del and release the
lock, ipoib_cm_tx_start may acquire it and call list_del_init
on the already deleted object.
Changing list_del to list_del_init in ipoib_cm_tx_reap fixes the problem.

Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index cdf0a78e0c99..d88f8dbe62d9 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -1362,7 +1362,7 @@ static void ipoib_cm_tx_reap(struct work_struct *work)
 
 	while (!list_empty(&priv->cm.reap_list)) {
 		p = list_entry(priv->cm.reap_list.next, typeof(*p), list);
-		list_del(&p->list);
+		list_del_init(&p->list);
 		spin_unlock_irqrestore(&priv->lock, flags);
 		netif_tx_unlock_bh(dev);
 		ipoib_cm_tx_destroy(p);
-- 
2.11.0