Re: [PATCH net-next v2] net: stmmac: fix LPI transitioning for dwmac4

[David Miller <davem@davemloft.net>]

From: Niklas Cassel <niklas.cassel@axis.com>
Date: Tue, 14 Nov 2017 11:15:54 +0100

> The LPI transitioning logic in stmmac_main uses
> priv->tx_path_in_lpi_mode to enter/exit LPI.
> 
> However, priv->tx_path_in_lpi_mode is assigned
> using the return value from host_irq_status().
> 
> So for dwmac4, priv->tx_path_in_lpi_mode was always false,
> so stmmac_tx_clean() would always try to put us in eee mode,
> and stmmac_xmit() would never take us out of eee mode.
> 
> To fix this, make host_irq_status() read and return the LPI
> irq status also for dwmac4.
> 
> This also increments the existing LPI counters, so that
> ethtool --statistics shows LPI transitions also for dwmac4.
> 
> For dwmac1000, irqs are enabled/disabled using the register
> named "Interrupt Mask Register", and thus setting a bit disables
> that specific irq.
> 
> For dwmac4 the matching register is named "MAC_Interrupt_Enable",
> and thus setting a bit enables that specific irq.
> 
> Looking at dwmac1000_core.c, the irqs that are always enabled are:
> LPI and PMT.
> 
> Looking at dwmac4_core.c, the irqs that are always enabled are:
> PMT.
> 
> To be able to read the LPI irq status, we need to enable the LPI
> irq also for dwmac4.
> 
> Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>

Applied.