From: alexander.levin@verizon.com
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"stable@vger.kernel.org" <stable@vger.kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>, alexander.levin@verizon.com
Subject: [PATCH AUTOSEL for 4.9 05/56] PCI: Apply _HPX settings only to relevant devices
Date: Wed, 22 Nov 2017 22:23:26 +0000 [thread overview]
Message-ID: <20171122222246.19618-10-alexander.levin@verizon.com> (raw)
In-Reply-To: <20171122222246.19618-1-alexander.levin@verizon.com>
From: Bjorn Helgaas <bhelgaas@google.com>
[ Upstream commit 977509f7c5c6fb992ffcdf4291051af343b91645 ]
Previously we didn't check the type of device before trying to apply Type 1
(PCI-X) or Type 2 (PCIe) Setting Records from _HPX.
We don't support PCI-X Setting Records, so this was harmless, but the
warning was useless.
We do support PCIe Setting Records, and we didn't check whether a device
was PCIe before applying settings. I don't think anything bad happened on
non-PCIe devices because pcie_capability_clear_and_set_word(),
pcie_cap_has_lnkctl(), etc., would fail before doing any harm. But it's
ugly to depend on those internals.
Check the device type before attempting to apply Type 1 and Type 2 Setting
Records (Type 0 records are applicable to PCI, PCI-X, and PCIe devices).
A side benefit is that this prevents useless "not supported" warnings when
a BIOS supplies a Type 1 (PCI-X) Setting Record and we try to apply it to
every single device:
pci 0000:00:00.0: PCI-X settings not supported
After this patch, we'll get the warning only when a BIOS supplies a Type 1
record and we have a PCI-X device to which it should be applied.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=187731
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
drivers/pci/probe.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index d266d800f246..60bada90cd75 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1438,8 +1438,16 @@ static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp)
{
- if (hpp)
- dev_warn(&dev->dev, "PCI-X settings not supported\n");
+ int pos;
+
+ if (!hpp)
+ return;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!pos)
+ return;
+
+ dev_warn(&dev->dev, "PCI-X settings not supported\n");
}
static bool pcie_root_rcb_set(struct pci_dev *dev)
@@ -1465,6 +1473,9 @@ static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
if (!hpp)
return;
+ if (!pci_is_pcie(dev))
+ return;
+
if (hpp->revision > 1) {
dev_warn(&dev->dev, "PCIe settings rev %d not supported\n",
hpp->revision);
--
2.11.0
next prev parent reply other threads:[~2017-11-22 23:29 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-22 22:23 [PATCH AUTOSEL for 4.9 01/56] ACPICA: Resources: Not a valid resource if buffer length too long alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 01/54] dax: Avoid page invalidation races and unnecessary radix tree traversals alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 02/54] net/mlx4_en: Fix type mismatch for 32-bit systems alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 03/54] l2tp: take remote address into account in l2tp_ip and l2tp_ip6 socket lookups alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 02/56] RDS: make message size limit compliant with spec alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 05/54] dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 04/56] RDS: RDMA: fix the ib_map_mr_sg_zbva() argument alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 04/54] dmaengine: stm32-dma: Set correct args number for DMA request from DT alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 03/56] RDS: RDMA: return appropriate error on rdma map failures alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 06/54] usb: gadget: f_fs: Fix ExtCompat descriptor validation alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 07/56] clk: sunxi-ng: A31: Fix spdif clock register alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 06/56] drm/sun4i: Fix a return value in case of error alexander.levin
2017-11-22 22:23 ` alexander.levin [this message]
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 08/54] net: systemport: Utilize skb_put_padto() alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 09/56] dmaengine: zx: set DMA_CYCLIC cap_mask bit alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 07/54] libcxgb: fix error check for ip6_route_output() alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 08/56] clk: sunxi-ng: fix PLL_CPUX adjusting on A33 alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 11/54] ARM: OMAP1: DMA: Correct the number of logical channels alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 10/54] ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 10/56] fscrypt: use ENOKEY when file cannot be created w/o key alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 09/54] net: systemport: Pad packet before inserting TSB alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 12/56] net: Allow IP_MULTICAST_IF to set index to L3 slave alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 11/56] fscrypt: use ENOTDIR when setting encryption policy on nondirectory alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 13/54] be2net: fix accesses to unicast list alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 12/54] vti6: fix device register to report IFLA_INFO_KIND alexander.levin
2017-11-22 22:23 ` [PATCH AUTOSEL for 4.9 13/56] net: 3com: typhoon: typhoon_init_one: make return values more specific alexander.levin
-- strict thread matches above, loose matches on Subject: below --
2017-11-15 2:45 [PATCH AUTOSEL for 4.9 01/56] ACPICA: Resources: Not a valid resource if buffer length too long alexander.levin
2017-11-15 2:45 ` [PATCH AUTOSEL for 4.9 05/56] PCI: Apply _HPX settings only to relevant devices alexander.levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171122222246.19618-10-alexander.levin@verizon.com \
--to=alexander.levin@verizon.com \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®