[PATCH AUTOSEL for 4.4 001/101] usb: phy: isp1301: Add OF device ID table

[PATCH AUTOSEL for 4.4 001/101] usb: phy: isp1301: Add OF device ID table

[alexander.levin]

From: Javier Martinez Canillas <javier@osg.samsung.com>

[ Upstream commit fd567653bdb908009b650f079bfd4b63169e2ac4 ]

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/usb/phy/phy-isp1301.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index db68156568e6..b3b33cf7ddf6 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -33,6 +33,12 @@ static const struct i2c_device_id isp1301_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, isp1301_id);
 
+static const struct of_device_id isp1301_of_match[] = {
+	{.compatible = "nxp,isp1301" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, isp1301_of_match);
+
 static struct i2c_client *isp1301_i2c_client;
 
 static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
@@ -130,6 +136,7 @@ static int isp1301_remove(struct i2c_client *client)
 static struct i2c_driver isp1301_driver = {
 	.driver = {
 		.name = DRV_NAME,
+		.of_match_table = of_match_ptr(isp1301_of_match),
 	},
 	.probe = isp1301_probe,
 	.remove = isp1301_remove,
-- 
2.11.0

[PATCH AUTOSEL for 4.4 002/101] md-cluster: free md_cluster_info if node leave cluster

[alexander.levin]

From: Guoqing Jiang <gqjiang@suse.com>

[ Upstream commit 9c8043f337f14d1743006dfc59c03e80a42e3884 ]

To avoid memory leak, we need to free the cinfo which
is allocated when node join cluster.

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/md/md-cluster.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/md/md-cluster.c b/drivers/md/md-cluster.c
index d6a1126d85ce..494d01d0e92a 100644
--- a/drivers/md/md-cluster.c
+++ b/drivers/md/md-cluster.c
@@ -821,6 +821,7 @@ static int leave(struct mddev *mddev)
 	lockres_free(cinfo->no_new_dev_lockres);
 	lockres_free(cinfo->bitmap_lockres);
 	dlm_release_lockspace(cinfo->lockspace, 2);
+	kfree(cinfo);
 	return 0;
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 003/101] userfaultfd: shmem: __do_fault requires VM_FAULT_NOPAGE

[alexander.levin]

From: Andrea Arcangeli <aarcange@redhat.com>

[ Upstream commit 6bbc4a4144b1a69743022ac68dfaf6e7d993abb9 ]

__do_fault assumes vmf->page has been initialized and is valid if
VM_FAULT_NOPAGE is not returned by vma->vm_ops->fault(vma, vmf).

handle_userfault() in turn should return VM_FAULT_NOPAGE if it doesn't
return VM_FAULT_SIGBUS or VM_FAULT_RETRY (the other two possibilities).

This VM_FAULT_NOPAGE case is only invoked when signal are pending and it
didn't matter for anonymous memory before.  It only started to matter
since shmem was introduced.  hugetlbfs also takes a different path and
doesn't exercise __do_fault.

Link: http://lkml.kernel.org/r/20170228154201.GH5816@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/userfaultfd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c
index 66cdb44616d5..59d58bdad7d3 100644
--- a/fs/userfaultfd.c
+++ b/fs/userfaultfd.c
@@ -386,7 +386,7 @@ int handle_userfault(struct vm_area_struct *vma, unsigned long address,
 			 * in such case.
 			 */
 			down_read(&mm->mmap_sem);
-			ret = 0;
+			ret = VM_FAULT_NOPAGE;
 		}
 	}
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 005/101] net: initialize msg.msg_flags in recvfrom

[alexander.levin]

From: Alexander Potapenko <glider@google.com>

[ Upstream commit 9f138fa609c47403374a862a08a41394be53d461 ]

KMSAN reports a use of uninitialized memory in put_cmsg() because
msg.msg_flags in recvfrom haven't been initialized properly.
The flag values don't affect the result on this path, but it's still a
good idea to initialize them explicitly.

Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/socket.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/socket.c b/net/socket.c
index fbfa9d2492cf..2cf4f25f5c2b 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1697,6 +1697,7 @@ SYSCALL_DEFINE6(recvfrom, int, fd, void __user *, ubuf, size_t, size,
 	/* We assume all kernel code knows the size of sockaddr_storage */
 	msg.msg_namelen = 0;
 	msg.msg_iocb = NULL;
+	msg.msg_flags = 0;
 	if (sock->file->f_flags & O_NONBLOCK)
 		flags |= MSG_DONTWAIT;
 	err = sock_recvmsg(sock, &msg, iov_iter_count(&msg.msg_iter), flags);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 004/101] userfaultfd: selftest: vm: allow to build in vm/ directory

[alexander.levin]

From: Andrea Arcangeli <aarcange@redhat.com>

[ Upstream commit 46aa6a302b53f543f8e8b8e1714dc5e449ad36a6 ]

linux/tools/testing/selftests/vm $ make

  gcc -Wall -I ../../../../usr/include     compaction_test.c -lrt -o /compaction_test
  /usr/lib/gcc/x86_64-pc-linux-gnu/4.9.4/../../../../x86_64-pc-linux-gnu/bin/ld: cannot open output file /compaction_test: Permission denied
  collect2: error: ld returned 1 exit status
  make: *** [../lib.mk:54: /compaction_test] Error 1

Since commit a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
selftests/vm build fails if run from the "selftests/vm" directory, but
it works in the selftests/ directory.  It's quicker to be able to do a
local vm-only build after a tree wipe and this patch allows for it
again.

Link: http://lkml.kernel.org/r/20170302173738.18994-4-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 tools/testing/selftests/vm/Makefile | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile
index e4bb1de1d526..b5f08e8cab33 100644
--- a/tools/testing/selftests/vm/Makefile
+++ b/tools/testing/selftests/vm/Makefile
@@ -1,5 +1,9 @@
 # Makefile for vm selftests
 
+ifndef OUTPUT
+  OUTPUT := $(shell pwd)
+endif
+
 CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS)
 BINARIES = compaction_test
 BINARIES += hugepage-mmap
-- 
2.11.0

[PATCH AUTOSEL for 4.4 008/101] net: bcmgenet: reserved phy revisions must be checked first

[alexander.levin]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit eca4bad73409aedc6ff22f823c18b67a4f08c851 ]

The reserved gphy_rev value of 0x01ff must be tested before the old
or new scheme for GPHY major versioning are tested, otherwise it will
be treated as 0xff00 according to the old scheme.

Fixes: b04a2f5b9ff5 ("net: bcmgenet: add support for new GENET PHY revision scheme")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index f848f49c590d..f252ed25b75b 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3326,6 +3326,12 @@ static void bcmgenet_set_hw_params(struct bcmgenet_priv *priv)
 	 */
 	gphy_rev = reg & 0xffff;
 
+	/* This is reserved so should require special treatment */
+	if (gphy_rev == 0 || gphy_rev == 0x01ff) {
+		pr_warn("Invalid GPHY revision detected: 0x%04x\n", gphy_rev);
+		return;
+	}
+
 	/* This is the good old scheme, just GPHY major, no minor nor patch */
 	if ((gphy_rev & 0xf0) != 0)
 		priv->gphy_rev = gphy_rev << 8;
@@ -3334,12 +3340,6 @@ static void bcmgenet_set_hw_params(struct bcmgenet_priv *priv)
 	else if ((gphy_rev & 0xff00) != 0)
 		priv->gphy_rev = gphy_rev;
 
-	/* This is reserved so should require special treatment */
-	else if (gphy_rev == 0 || gphy_rev == 0x01ff) {
-		pr_warn("Invalid GPHY revision detected: 0x%04x\n", gphy_rev);
-		return;
-	}
-
 #ifdef CONFIG_PHYS_ADDR_T_64BIT
 	if (!(params->flags & GENET_HAS_40BITS))
 		pr_warn("GENET does not support 40-bits PA\n");
-- 
2.11.0

[PATCH AUTOSEL for 4.4 006/101] net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values

[alexander.levin]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit ffff71328a3c321f7c14cc1edd33577717037744 ]

The location of the RBUF overflow and error counters has moved between
different version of the GENET MAC.  This commit corrects the driver to
read from the correct locations depending on the version of the GENET
MAC.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 60 +++++++++++++++++++++++---
 drivers/net/ethernet/broadcom/genet/bcmgenet.h | 10 +++--
 2 files changed, 60 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index f971d92f7b41..ab4448b8b20c 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1,7 +1,7 @@
 /*
  * Broadcom GENET (Gigabit Ethernet) controller driver
  *
- * Copyright (c) 2014 Broadcom Corporation
+ * Copyright (c) 2014-2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -778,8 +778,9 @@ static const struct bcmgenet_stats bcmgenet_gstrings_stats[] = {
 	STAT_GENET_RUNT("rx_runt_bytes", mib.rx_runt_bytes),
 	/* Misc UniMAC counters */
 	STAT_GENET_MISC("rbuf_ovflow_cnt", mib.rbuf_ovflow_cnt,
-			UMAC_RBUF_OVFL_CNT),
-	STAT_GENET_MISC("rbuf_err_cnt", mib.rbuf_err_cnt, UMAC_RBUF_ERR_CNT),
+			UMAC_RBUF_OVFL_CNT_V1),
+	STAT_GENET_MISC("rbuf_err_cnt", mib.rbuf_err_cnt,
+			UMAC_RBUF_ERR_CNT_V1),
 	STAT_GENET_MISC("mdf_err_cnt", mib.mdf_err_cnt, UMAC_MDF_ERR_CNT),
 	STAT_GENET_SOFT_MIB("alloc_rx_buff_failed", mib.alloc_rx_buff_failed),
 	STAT_GENET_SOFT_MIB("rx_dma_failed", mib.rx_dma_failed),
@@ -821,6 +822,45 @@ static void bcmgenet_get_strings(struct net_device *dev, u32 stringset,
 	}
 }
 
+static u32 bcmgenet_update_stat_misc(struct bcmgenet_priv *priv, u16 offset)
+{
+	u16 new_offset;
+	u32 val;
+
+	switch (offset) {
+	case UMAC_RBUF_OVFL_CNT_V1:
+		if (GENET_IS_V2(priv))
+			new_offset = RBUF_OVFL_CNT_V2;
+		else
+			new_offset = RBUF_OVFL_CNT_V3PLUS;
+
+		val = bcmgenet_rbuf_readl(priv,	new_offset);
+		/* clear if overflowed */
+		if (val == ~0)
+			bcmgenet_rbuf_writel(priv, 0, new_offset);
+		break;
+	case UMAC_RBUF_ERR_CNT_V1:
+		if (GENET_IS_V2(priv))
+			new_offset = RBUF_ERR_CNT_V2;
+		else
+			new_offset = RBUF_ERR_CNT_V3PLUS;
+
+		val = bcmgenet_rbuf_readl(priv,	new_offset);
+		/* clear if overflowed */
+		if (val == ~0)
+			bcmgenet_rbuf_writel(priv, 0, new_offset);
+		break;
+	default:
+		val = bcmgenet_umac_readl(priv, offset);
+		/* clear if overflowed */
+		if (val == ~0)
+			bcmgenet_umac_writel(priv, 0, offset);
+		break;
+	}
+
+	return val;
+}
+
 static void bcmgenet_update_mib_counters(struct bcmgenet_priv *priv)
 {
 	int i, j = 0;
@@ -845,10 +885,16 @@ static void bcmgenet_update_mib_counters(struct bcmgenet_priv *priv)
 						  UMAC_MIB_START + j + offset);
 			break;
 		case BCMGENET_STAT_MISC:
-			val = bcmgenet_umac_readl(priv, s->reg_offset);
-			/* clear if overflowed */
-			if (val == ~0)
-				bcmgenet_umac_writel(priv, 0, s->reg_offset);
+			if (GENET_IS_V1(priv)) {
+				val = bcmgenet_umac_readl(priv, s->reg_offset);
+				/* clear if overflowed */
+				if (val == ~0)
+					bcmgenet_umac_writel(priv, 0,
+							     s->reg_offset);
+			} else {
+				val = bcmgenet_update_stat_misc(priv,
+								s->reg_offset);
+			}
 			break;
 		}
 
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index 967367557309..cef53f2d9854 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014 Broadcom Corporation
+ * Copyright (c) 2014-2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -214,7 +214,9 @@ struct bcmgenet_mib_counters {
 #define  MDIO_REG_SHIFT			16
 #define  MDIO_REG_MASK			0x1F
 
-#define UMAC_RBUF_OVFL_CNT		0x61C
+#define UMAC_RBUF_OVFL_CNT_V1		0x61C
+#define RBUF_OVFL_CNT_V2		0x80
+#define RBUF_OVFL_CNT_V3PLUS		0x94
 
 #define UMAC_MPD_CTRL			0x620
 #define  MPD_EN				(1 << 0)
@@ -224,7 +226,9 @@ struct bcmgenet_mib_counters {
 
 #define UMAC_MPD_PW_MS			0x624
 #define UMAC_MPD_PW_LS			0x628
-#define UMAC_RBUF_ERR_CNT		0x634
+#define UMAC_RBUF_ERR_CNT_V1		0x634
+#define RBUF_ERR_CNT_V2			0x84
+#define RBUF_ERR_CNT_V3PLUS		0x98
 #define UMAC_MDF_ERR_CNT		0x638
 #define UMAC_MDF_CTRL			0x650
 #define UMAC_MDF_ADDR			0x654
-- 
2.11.0

[PATCH AUTOSEL for 4.4 007/101] net: bcmgenet: correct MIB access of UniMAC RUNT counters

[alexander.levin]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit 1ad3d225e5a40ca6c586989b4baaca710544c15a ]

The gap between the Tx status counters and the Rx RUNT counters is now
being added to allow correct reporting of the registers.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index ab4448b8b20c..f848f49c590d 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -876,13 +876,16 @@ static void bcmgenet_update_mib_counters(struct bcmgenet_priv *priv)
 		case BCMGENET_STAT_NETDEV:
 		case BCMGENET_STAT_SOFT:
 			continue;
-		case BCMGENET_STAT_MIB_RX:
-		case BCMGENET_STAT_MIB_TX:
 		case BCMGENET_STAT_RUNT:
-			if (s->type != BCMGENET_STAT_MIB_RX)
-				offset = BCMGENET_STAT_OFFSET;
+			offset += BCMGENET_STAT_OFFSET;
+			/* fall through */
+		case BCMGENET_STAT_MIB_TX:
+			offset += BCMGENET_STAT_OFFSET;
+			/* fall through */
+		case BCMGENET_STAT_MIB_RX:
 			val = bcmgenet_umac_readl(priv,
 						  UMAC_MIB_START + j + offset);
+			offset = 0;	/* Reset Offset */
 			break;
 		case BCMGENET_STAT_MISC:
 			if (GENET_IS_V1(priv)) {
-- 
2.11.0

[PATCH AUTOSEL for 4.4 009/101] net: bcmgenet: power down internal phy if open or resume fails

[alexander.levin]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit 7627409cc4970e8c8b9de6945ad86a575290a94e ]

Since the internal PHY is powered up during the open and resume
functions it should be powered back down if the functions fail.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index f252ed25b75b..9217a0f4082f 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2950,6 +2950,8 @@ err_irq0:
 err_fini_dma:
 	bcmgenet_fini_dma(priv);
 err_clk_disable:
+	if (priv->internal_phy)
+		bcmgenet_power_down(priv, GENET_POWER_PASSIVE);
 	clk_disable_unprepare(priv->clk);
 	return ret;
 }
@@ -3653,6 +3655,8 @@ static int bcmgenet_resume(struct device *d)
 	return 0;
 
 out_clk_disable:
+	if (priv->internal_phy)
+		bcmgenet_power_down(priv, GENET_POWER_PASSIVE);
 	clk_disable_unprepare(priv->clk);
 	return ret;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.4 010/101] net: bcmgenet: Power up the internal PHY before probing the MII

[alexander.levin]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit 6be371b053dc86f11465cc1abce2e99bda0a0574 ]

When using the internal PHY it must be powered up when the MII is probed
or the PHY will not be detected.  Since the PHY is powered up at reset
this has not been a problem.  However, when the kernel is restarted with
kexec the PHY will likely be powered down when the kernel starts so it
will not be detected and the Ethernet link will not be established.

This commit explicitly powers up the internal PHY when the GENET driver
is probed to correct this behavior.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 9217a0f4082f..74dd48f2bd89 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3384,6 +3384,7 @@ static int bcmgenet_probe(struct platform_device *pdev)
 	const void *macaddr;
 	struct resource *r;
 	int err = -EIO;
+	const char *phy_mode_str;
 
 	/* Up to GENET_MAX_MQ_CNT + 1 TX queues and RX queues */
 	dev = alloc_etherdev_mqs(sizeof(*priv), GENET_MAX_MQ_CNT + 1,
@@ -3489,6 +3490,13 @@ static int bcmgenet_probe(struct platform_device *pdev)
 		priv->clk_eee = NULL;
 	}
 
+	/* If this is an internal GPHY, power it on now, before UniMAC is
+	 * brought out of reset as absolutely no UniMAC activity is allowed
+	 */
+	if (dn && !of_property_read_string(dn, "phy-mode", &phy_mode_str) &&
+	    !strcasecmp(phy_mode_str, "internal"))
+		bcmgenet_power_up(priv, GENET_POWER_PASSIVE);
+
 	err = reset_umac(priv);
 	if (err)
 		goto err_clk_disable;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 012/101] NFSD: fix nfsd_reset_versions for NFSv4.

[alexander.levin]

From: NeilBrown <neilb@suse.com>

[ Upstream commit 800a938f0bf9130c8256116649c0cc5806bfb2fd ]

If you write "-2 -3 -4" to the "versions" file, it will
notice that no versions are enabled, and nfsd_reset_versions()
is called.
This enables all major versions, not no minor versions.
So we lose the invariant that NFSv4 is only advertised when
at least one minor is enabled.

Fix the code to explicitly enable minor versions for v4,
change it to use nfsd_vers() to test and set, and simplify
the code.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/nfsd/nfssvc.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 8a20b1932eed..b6eb56d18568 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -330,23 +330,20 @@ static void nfsd_last_thread(struct svc_serv *serv, struct net *net)
 
 void nfsd_reset_versions(void)
 {
-	int found_one = 0;
 	int i;
 
-	for (i = NFSD_MINVERS; i < NFSD_NRVERS; i++) {
-		if (nfsd_program.pg_vers[i])
-			found_one = 1;
-	}
-
-	if (!found_one) {
-		for (i = NFSD_MINVERS; i < NFSD_NRVERS; i++)
-			nfsd_program.pg_vers[i] = nfsd_version[i];
-#if defined(CONFIG_NFSD_V2_ACL) || defined(CONFIG_NFSD_V3_ACL)
-		for (i = NFSD_ACL_MINVERS; i < NFSD_ACL_NRVERS; i++)
-			nfsd_acl_program.pg_vers[i] =
-				nfsd_acl_version[i];
-#endif
-	}
+	for (i = 0; i < NFSD_NRVERS; i++)
+		if (nfsd_vers(i, NFSD_TEST))
+			return;
+
+	for (i = 0; i < NFSD_NRVERS; i++)
+		if (i != 4)
+			nfsd_vers(i, NFSD_SET);
+		else {
+			int minor = 0;
+			while (nfsd_minorversion(minor, NFSD_SET) >= 0)
+				minor++;
+		}
 }
 
 /*
-- 
2.11.0

[PATCH AUTOSEL for 4.4 011/101] NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)

[alexander.levin]

From: NeilBrown <neilb@suse.com>

[ Upstream commit 928c6fb3a9bfd6c5b287aa3465226add551c13c0 ]

Current code will return 1 if the version is supported,
and -1 if it isn't.
This is confusing and inconsistent with the one place where this
is used.
So change to return 1 if it is supported, and zero if not.
i.e. an error is never returned.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/nfsd/nfssvc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 5be1fa6b676d..8a20b1932eed 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -151,7 +151,8 @@ int nfsd_vers(int vers, enum vers_op change)
 
 int nfsd_minorversion(u32 minorversion, enum vers_op change)
 {
-	if (minorversion > NFSD_SUPPORTED_MINOR_VERSION)
+	if (minorversion > NFSD_SUPPORTED_MINOR_VERSION &&
+	    change != NFSD_AVAIL)
 		return -1;
 	switch(change) {
 	case NFSD_SET:
-- 
2.11.0

[PATCH AUTOSEL for 4.4 014/101] drm/omap: fix dmabuf mmap for dma_alloc'ed buffers

[alexander.levin]

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit 9fa1d7537242bd580ffa99c4725a0407096aad26 ]

omap_gem_dmabuf_mmap() returns an error (with a WARN) when called for a
buffer which is allocated with dma_alloc_*(). This prevents dmabuf mmap
from working on SoCs without DMM, e.g. AM4 and OMAP3.

I could not find any reason for omap_gem_dmabuf_mmap() rejecting such
buffers, and just removing the if() fixes the limitation.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c b/drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c
index 27c297672076..d2d1c9a34da1 100644
--- a/drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c
+++ b/drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c
@@ -142,9 +142,6 @@ static int omap_gem_dmabuf_mmap(struct dma_buf *buffer,
 	struct drm_gem_object *obj = buffer->priv;
 	int ret = 0;
 
-	if (WARN_ON(!obj->filp))
-		return -EINVAL;
-
 	ret = drm_gem_mmap_obj(obj, omap_gem_mmap_size(obj), vma);
 	if (ret < 0)
 		return ret;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 016/101] writeback: fix memory leak in wb_queue_work()

[alexander.levin]

From: Tahsin Erdogan <tahsin@google.com>

[ Upstream commit 4a3a485b1ed0e109718cc8c9d094fa0f552de9b2 ]

When WB_registered flag is not set, wb_queue_work() skips queuing the
work, but does not perform the necessary clean up. In particular, if
work->auto_free is true, it should free the memory.

The leak condition can be reprouced by following these steps:

   mount /dev/sdb /mnt/sdb
   /* In qemu console: device_del sdb */
   umount /dev/sdb

Above will result in a wb_queue_work() call on an unregistered wb and
thus leak memory.

Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/fs-writeback.c | 35 +++++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 14 deletions(-)

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 60d6fc2e0e4b..22b30249fbcb 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -173,19 +173,33 @@ static void wb_wakeup(struct bdi_writeback *wb)
 	spin_unlock_bh(&wb->work_lock);
 }
 
+static void finish_writeback_work(struct bdi_writeback *wb,
+				  struct wb_writeback_work *work)
+{
+	struct wb_completion *done = work->done;
+
+	if (work->auto_free)
+		kfree(work);
+	if (done && atomic_dec_and_test(&done->cnt))
+		wake_up_all(&wb->bdi->wb_waitq);
+}
+
 static void wb_queue_work(struct bdi_writeback *wb,
 			  struct wb_writeback_work *work)
 {
 	trace_writeback_queue(wb, work);
 
-	spin_lock_bh(&wb->work_lock);
-	if (!test_bit(WB_registered, &wb->state))
-		goto out_unlock;
 	if (work->done)
 		atomic_inc(&work->done->cnt);
-	list_add_tail(&work->list, &wb->work_list);
-	mod_delayed_work(bdi_wq, &wb->dwork, 0);
-out_unlock:
+
+	spin_lock_bh(&wb->work_lock);
+
+	if (test_bit(WB_registered, &wb->state)) {
+		list_add_tail(&work->list, &wb->work_list);
+		mod_delayed_work(bdi_wq, &wb->dwork, 0);
+	} else
+		finish_writeback_work(wb, work);
+
 	spin_unlock_bh(&wb->work_lock);
 }
 
@@ -1839,16 +1853,9 @@ static long wb_do_writeback(struct bdi_writeback *wb)
 
 	set_bit(WB_writeback_running, &wb->state);
 	while ((work = get_next_work_item(wb)) != NULL) {
-		struct wb_completion *done = work->done;
-
 		trace_writeback_exec(wb, work);
-
 		wrote += wb_writeback(wb, work);
-
-		if (work->auto_free)
-			kfree(work);
-		if (done && atomic_dec_and_test(&done->cnt))
-			wake_up_all(&wb->bdi->wb_waitq);
+		finish_writeback_work(wb, work);
 	}
 
 	/*
-- 
2.11.0

[PATCH AUTOSEL for 4.4 017/101] net: wimax/i2400m: fix NULL-deref at probe

[alexander.levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 6e526fdff7be4f13b24f929a04c0e9ae6761291e ]

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

The endpoints are specifically dereferenced in the i2400m_bootrom_init
path during probe (e.g. in i2400mu_tx_bulk_out).

Fixes: f398e4240fce ("i2400m/USB: probe/disconnect, dev init/shutdown
and reset backends")
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/wimax/i2400m/usb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index e7f5910a6519..f8eb66ef2944 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -467,6 +467,9 @@ int i2400mu_probe(struct usb_interface *iface,
 	struct i2400mu *i2400mu;
 	struct usb_device *usb_dev = interface_to_usbdev(iface);
 
+	if (iface->cur_altsetting->desc.bNumEndpoints < 4)
+		return -ENODEV;
+
 	if (usb_dev->speed != USB_SPEED_HIGH)
 		dev_err(dev, "device not connected as high speed\n");
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 013/101] Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list

[alexander.levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit a4c2a13129f7c5bcf81704c06851601593303fd5 ]

TUXEDO BU1406 does not implement active multiplexing mode properly,
and takes around 550 ms in i8042_set_mux_mode(). Given that the
device does not have external AUX port, there is no downside in
disabling the MUX mode.

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Suggested-by: Vojtech Pavlik <vojtech@suse.cz>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index dbf09836ff30..d1051e3ce819 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -520,6 +520,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "IC4I"),
 		},
 	},
+	{
+		/* TUXEDO BU1406 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "N24_25BU"),
+		},
+	},
 	{ }
 };
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 015/101] netfilter: bridge: honor frag_max_size when refragmenting

[alexander.levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 4ca60d08cbe65f501baad64af50fceba79c19fbb ]

consider a bridge with mtu 9000, but end host sending smaller
packets to another host with mtu < 9000.

In this case, after reassembly, bridge+defrag would refragment,
and then attempt to send the reassembled packet as long as it
was below 9k.

Instead we have to cap by the largest fragment size seen.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/bridge/br_netfilter_hooks.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index 97fc19f001bf..55dcb2b20b59 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -701,18 +701,20 @@ static unsigned int nf_bridge_mtu_reduction(const struct sk_buff *skb)
 
 static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff *skb)
 {
-	struct nf_bridge_info *nf_bridge;
-	unsigned int mtu_reserved;
+	struct nf_bridge_info *nf_bridge = nf_bridge_info_get(skb);
+	unsigned int mtu, mtu_reserved;
 
 	mtu_reserved = nf_bridge_mtu_reduction(skb);
+	mtu = skb->dev->mtu;
+
+	if (nf_bridge->frag_max_size && nf_bridge->frag_max_size < mtu)
+		mtu = nf_bridge->frag_max_size;
 
-	if (skb_is_gso(skb) || skb->len + mtu_reserved <= skb->dev->mtu) {
+	if (skb_is_gso(skb) || skb->len + mtu_reserved <= mtu) {
 		nf_bridge_info_free(skb);
 		return br_dev_queue_push_xmit(net, sk, skb);
 	}
 
-	nf_bridge = nf_bridge_info_get(skb);
-
 	/* This is wrong! We should preserve the original fragment
 	 * boundaries by preserving frag_list rather than refragmenting.
 	 */
-- 
2.11.0

[PATCH AUTOSEL for 4.4 020/101] mlxsw: reg: Fix SPVM max record count

[alexander.levin]

From: Jiri Pirko <jiri@mellanox.com>

[ Upstream commit f004ec065b4879d6bc9ba0211af2169b3ce3097f ]

The num_rec field is 8 bit, so the maximal count number is 255. This
fixes vlans not being enabled for wider ranges than 255.

Fixes: b2e345f9a454 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 236fb5d2ad69..3f2bf9ef2b2b 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -599,7 +599,7 @@ static inline void mlxsw_reg_spvid_pack(char *payload, u8 local_port, u16 pvid)
 #define MLXSW_REG_SPVM_ID 0x200F
 #define MLXSW_REG_SPVM_BASE_LEN 0x04 /* base length, without records */
 #define MLXSW_REG_SPVM_REC_LEN 0x04 /* record length */
-#define MLXSW_REG_SPVM_REC_MAX_COUNT 256
+#define MLXSW_REG_SPVM_REC_MAX_COUNT 255
 #define MLXSW_REG_SPVM_LEN (MLXSW_REG_SPVM_BASE_LEN +	\
 		    MLXSW_REG_SPVM_REC_LEN * MLXSW_REG_SPVM_REC_MAX_COUNT)
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 021/101] mlxsw: reg: Fix SPVMLR max record count

[alexander.levin]

From: Jiri Pirko <jiri@mellanox.com>

[ Upstream commit e9093b1183bbac462d2caef3eac165778c0b1bf1 ]

The num_rec field is 8 bit, so the maximal count number is 255.
This fixes vlans learning not being enabled for wider ranges than 255.

Fixes: a4feea74cd7a ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 3f2bf9ef2b2b..c7fe61f1f89f 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -1139,7 +1139,7 @@ static inline void mlxsw_reg_sfmr_pack(char *payload,
 #define MLXSW_REG_SPVMLR_ID 0x2020
 #define MLXSW_REG_SPVMLR_BASE_LEN 0x04 /* base length, without records */
 #define MLXSW_REG_SPVMLR_REC_LEN 0x04 /* record length */
-#define MLXSW_REG_SPVMLR_REC_MAX_COUNT 256
+#define MLXSW_REG_SPVMLR_REC_MAX_COUNT 255
 #define MLXSW_REG_SPVMLR_LEN (MLXSW_REG_SPVMLR_BASE_LEN + \
 			      MLXSW_REG_SPVMLR_REC_LEN * \
 			      MLXSW_REG_SPVMLR_REC_MAX_COUNT)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 019/101] net: Resend IGMP memberships upon peer notification.

[alexander.levin]

From: Vlad Yasevich <vyasevich@gmail.com>

[ Upstream commit 37c343b4f4e70e9dc328ab04903c0ec8d154c1a4 ]

When we notify peers of potential changes,  it's also good to update
IGMP memberships.  For example, during VM migration, updating IGMP
memberships will redirect existing multicast streams to the VM at the
new location.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/core/dev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/core/dev.c b/net/core/dev.c
index 630704d8d6a2..3b67c1e5756f 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1300,6 +1300,7 @@ void netdev_notify_peers(struct net_device *dev)
 {
 	rtnl_lock();
 	call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, dev);
+	call_netdevice_notifiers(NETDEV_RESEND_IGMP, dev);
 	rtnl_unlock();
 }
 EXPORT_SYMBOL(netdev_notify_peers);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 018/101] dmaengine: Fix array index out of bounds warning in __get_unmap_pool()

[alexander.levin]

From: Matthias Kaehlcke <mka@chromium.org>

[ Upstream commit 23f963e91fd81f44f6b316b1c24db563354c6be8 ]

This fixes the following warning when building with clang and
CONFIG_DMA_ENGINE_RAID=n :

drivers/dma/dmaengine.c:1102:11: error: array index 2 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds]
                return &unmap_pool[2];
                        ^          ~
drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here
static struct dmaengine_unmap_pool unmap_pool[] = {
^
drivers/dma/dmaengine.c:1104:11: error: array index 3 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds]
                return &unmap_pool[3];
                        ^          ~
drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here
static struct dmaengine_unmap_pool unmap_pool[] = {

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/dma/dmaengine.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 3ecec1445adf..8b9e28f1e3f5 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -1023,12 +1023,14 @@ static struct dmaengine_unmap_pool *__get_unmap_pool(int nr)
 	switch (order) {
 	case 0 ... 1:
 		return &unmap_pool[0];
+#if IS_ENABLED(CONFIG_DMA_ENGINE_RAID)
 	case 2 ... 4:
 		return &unmap_pool[1];
 	case 5 ... 7:
 		return &unmap_pool[2];
 	case 8:
 		return &unmap_pool[3];
+#endif
 	default:
 		BUG();
 		return NULL;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 025/101] scsi: hpsa: limit outstanding rescans

[alexander.levin]

From: Don Brace <don.brace@microsemi.com>

[ Upstream commit 87b9e6aa87d9411f1059aa245c0c79976bc557ac ]

Avoid rescan storms. No need to queue another if one is pending.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/hpsa.c | 16 +++++++++++++++-
 drivers/scsi/hpsa.h |  1 +
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 09f0de8fb2d9..2feab0f93fdd 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5254,7 +5254,7 @@ static void hpsa_scan_complete(struct ctlr_info *h)
 
 	spin_lock_irqsave(&h->scan_lock, flags);
 	h->scan_finished = 1;
-	wake_up_all(&h->scan_wait_queue);
+	wake_up(&h->scan_wait_queue);
 	spin_unlock_irqrestore(&h->scan_lock, flags);
 }
 
@@ -5272,11 +5272,23 @@ static void hpsa_scan_start(struct Scsi_Host *sh)
 	if (unlikely(lockup_detected(h)))
 		return hpsa_scan_complete(h);
 
+	/*
+	 * If a scan is already waiting to run, no need to add another
+	 */
+	spin_lock_irqsave(&h->scan_lock, flags);
+	if (h->scan_waiting) {
+		spin_unlock_irqrestore(&h->scan_lock, flags);
+		return;
+	}
+
+	spin_unlock_irqrestore(&h->scan_lock, flags);
+
 	/* wait until any scan already in progress is finished. */
 	while (1) {
 		spin_lock_irqsave(&h->scan_lock, flags);
 		if (h->scan_finished)
 			break;
+		h->scan_waiting = 1;
 		spin_unlock_irqrestore(&h->scan_lock, flags);
 		wait_event(h->scan_wait_queue, h->scan_finished);
 		/* Note: We don't need to worry about a race between this
@@ -5286,6 +5298,7 @@ static void hpsa_scan_start(struct Scsi_Host *sh)
 		 */
 	}
 	h->scan_finished = 0; /* mark scan as in progress */
+	h->scan_waiting = 0;
 	spin_unlock_irqrestore(&h->scan_lock, flags);
 
 	if (unlikely(lockup_detected(h)))
@@ -8502,6 +8515,7 @@ reinit_after_soft_reset:
 	init_waitqueue_head(&h->event_sync_wait_queue);
 	mutex_init(&h->reset_mutex);
 	h->scan_finished = 1; /* no scan currently in progress */
+	h->scan_waiting = 0;
 
 	pci_set_drvdata(pdev, h);
 	h->ndevices = 0;
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index ae5beda1bdb5..0e602750487a 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -200,6 +200,7 @@ struct ctlr_info {
 	dma_addr_t		errinfo_pool_dhandle;
 	unsigned long  		*cmd_pool_bits;
 	int			scan_finished;
+	u8			scan_waiting : 1;
 	spinlock_t		scan_lock;
 	wait_queue_head_t	scan_wait_queue;
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 023/101] openrisc: fix issue handling 8 byte get_user calls

[alexander.levin]

From: Stafford Horne <shorne@gmail.com>

[ Upstream commit 154e67cd8e8f964809d0e75e44bb121b169c75b3 ]

Was getting the following error with allmodconfig:

  ERROR: "__get_user_bad" [lib/test_user_copy.ko] undefined!

This was simply a missing break statement, causing an unwanted fall
through.

Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/openrisc/include/asm/uaccess.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/openrisc/include/asm/uaccess.h b/arch/openrisc/include/asm/uaccess.h
index 5cc6b4f1b795..1a836afb636d 100644
--- a/arch/openrisc/include/asm/uaccess.h
+++ b/arch/openrisc/include/asm/uaccess.h
@@ -215,7 +215,7 @@ do {									\
 	case 1: __get_user_asm(x, ptr, retval, "l.lbz"); break;		\
 	case 2: __get_user_asm(x, ptr, retval, "l.lhz"); break;		\
 	case 4: __get_user_asm(x, ptr, retval, "l.lwz"); break;		\
-	case 8: __get_user_asm2(x, ptr, retval);			\
+	case 8: __get_user_asm2(x, ptr, retval); break;			\
 	default: (x) = __get_user_bad();				\
 	}								\
 } while (0)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 024/101] scsi: hpsa: update check for logical volume status

[alexander.levin]

From: Don Brace <don.brace@microsemi.com>

[ Upstream commit 85b29008d8af6d94a0723aaa8d93cfb6e041158b ]

 - Add in a new case for volume offline. Resolves internal testing bug
   for multilun array management.
 - Return correct status for failed TURs.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/hpsa.c     | 35 ++++++++++++++++-------------------
 drivers/scsi/hpsa_cmd.h |  2 ++
 2 files changed, 18 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index e9ce74afd13f..09f0de8fb2d9 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3466,7 +3466,7 @@ exit_failed:
  *  # (integer code indicating one of several NOT READY states
  *     describing why a volume is to be kept offline)
  */
-static int hpsa_volume_offline(struct ctlr_info *h,
+static unsigned char hpsa_volume_offline(struct ctlr_info *h,
 					unsigned char scsi3addr[])
 {
 	struct CommandList *c;
@@ -3486,7 +3486,7 @@ static int hpsa_volume_offline(struct ctlr_info *h,
 	rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT);
 	if (rc) {
 		cmd_free(h, c);
-		return 0;
+		return HPSA_VPD_LV_STATUS_UNSUPPORTED;
 	}
 	sense = c->err_info->SenseInfo;
 	if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
@@ -3497,19 +3497,13 @@ static int hpsa_volume_offline(struct ctlr_info *h,
 	cmd_status = c->err_info->CommandStatus;
 	scsi_status = c->err_info->ScsiStatus;
 	cmd_free(h, c);
-	/* Is the volume 'not ready'? */
-	if (cmd_status != CMD_TARGET_STATUS ||
-		scsi_status != SAM_STAT_CHECK_CONDITION ||
-		sense_key != NOT_READY ||
-		asc != ASC_LUN_NOT_READY)  {
-		return 0;
-	}
 
 	/* Determine the reason for not ready state */
 	ldstat = hpsa_get_volume_status(h, scsi3addr);
 
 	/* Keep volume offline in certain cases: */
 	switch (ldstat) {
+	case HPSA_LV_FAILED:
 	case HPSA_LV_UNDERGOING_ERASE:
 	case HPSA_LV_NOT_AVAILABLE:
 	case HPSA_LV_UNDERGOING_RPI:
@@ -3531,7 +3525,7 @@ static int hpsa_volume_offline(struct ctlr_info *h,
 	default:
 		break;
 	}
-	return 0;
+	return HPSA_LV_OK;
 }
 
 /*
@@ -3615,10 +3609,10 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 	/* Do an inquiry to the device to see what it is. */
 	if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
 		(unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
-		/* Inquiry failed (msg printed already) */
 		dev_err(&h->pdev->dev,
-			"hpsa_update_device_info: inquiry failed\n");
-		rc = -EIO;
+			"%s: inquiry failed, device will be skipped.\n",
+			__func__);
+		rc = HPSA_INQUIRY_FAILED;
 		goto bail_out;
 	}
 
@@ -3638,15 +3632,19 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 
 	if (this_device->devtype == TYPE_DISK &&
 		is_logical_dev_addr_mode(scsi3addr)) {
-		int volume_offline;
+		unsigned char volume_offline;
 
 		hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level);
 		if (h->fw_support & MISC_FW_RAID_OFFLOAD_BASIC)
 			hpsa_get_ioaccel_status(h, scsi3addr, this_device);
 		volume_offline = hpsa_volume_offline(h, scsi3addr);
-		if (volume_offline < 0 || volume_offline > 0xff)
-			volume_offline = HPSA_VPD_LV_STATUS_UNSUPPORTED;
-		this_device->volume_offline = volume_offline & 0xff;
+		if (volume_offline == HPSA_LV_FAILED) {
+			rc = HPSA_LV_FAILED;
+			dev_err(&h->pdev->dev,
+				"%s: LV failed, device will be skipped.\n",
+				__func__);
+			goto bail_out;
+		}
 	} else {
 		this_device->raid_level = RAID_UNKNOWN;
 		this_device->offload_config = 0;
@@ -4115,8 +4113,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 			goto out;
 		}
 		if (rc) {
-			dev_warn(&h->pdev->dev,
-				"Inquiry failed, skipping device.\n");
+			h->drv_req_rescan = 1;
 			continue;
 		}
 
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index d92ef0d352b5..26488e2a7f02 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -155,6 +155,7 @@
 #define CFGTBL_BusType_Fibre2G  0x00000200l
 
 /* VPD Inquiry types */
+#define HPSA_INQUIRY_FAILED		0x02
 #define HPSA_VPD_SUPPORTED_PAGES        0x00
 #define HPSA_VPD_LV_DEVICE_GEOMETRY     0xC1
 #define HPSA_VPD_LV_IOACCEL_STATUS      0xC2
@@ -164,6 +165,7 @@
 /* Logical volume states */
 #define HPSA_VPD_LV_STATUS_UNSUPPORTED			0xff
 #define HPSA_LV_OK                                      0x0
+#define HPSA_LV_FAILED					0x01
 #define HPSA_LV_NOT_AVAILABLE				0x0b
 #define HPSA_LV_UNDERGOING_ERASE			0x0F
 #define HPSA_LV_UNDERGOING_RPI				0x12
-- 
2.11.0

[PATCH AUTOSEL for 4.4 022/101] intel_th: pci: Add Gemini Lake support

[alexander.levin]

From: Alexander Shishkin <alexander.shishkin@linux.intel.com>

[ Upstream commit 340837f985c2cb87ca0868d4aa9ce42b0fab3a21 ]

This adds Intel(R) Trace Hub PCI ID for Gemini Lake SOC.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/hwtracing/intel_th/pci.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/hwtracing/intel_th/pci.c b/drivers/hwtracing/intel_th/pci.c
index 32c6a40a408f..ea85330603b2 100644
--- a/drivers/hwtracing/intel_th/pci.c
+++ b/drivers/hwtracing/intel_th/pci.c
@@ -82,6 +82,11 @@ static const struct pci_device_id intel_th_pci_id_table[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x9da6),
 		.driver_data = (kernel_ulong_t)0,
 	},
+	{
+		/* Gemini Lake */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x318e),
+		.driver_data = (kernel_ulong_t)0,
+	},
 	{ 0 },
 };
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 026/101] fjes: Fix wrong netdevice feature flags

[alexander.levin]

From: Taku Izumi <izumi.taku@jp.fujitsu.com>

[ Upstream commit fe8daf5fa715f7214952f06a387e4b7de818c5be ]

This patch fixes netdev->features for Extended Socket network device.

Currently Extended Socket network device's netdev->feature claims
NETIF_F_HW_CSUM, however this is completely wrong. There's no feature
of checksum offloading.
That causes invalid TCP/UDP checksum and packet rejection when IP
forwarding from Extended Socket network device to other network device.

NETIF_F_HW_CSUM should be omitted.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/fjes/fjes_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/fjes/fjes_main.c b/drivers/net/fjes/fjes_main.c
index 0ddb54fe3d91..a539e831b4b1 100644
--- a/drivers/net/fjes/fjes_main.c
+++ b/drivers/net/fjes/fjes_main.c
@@ -1205,7 +1205,7 @@ static void fjes_netdev_setup(struct net_device *netdev)
 	fjes_set_ethtool_ops(netdev);
 	netdev->mtu = fjes_support_mtu[0];
 	netdev->flags |= IFF_BROADCAST;
-	netdev->features |= NETIF_F_HW_CSUM | NETIF_F_HW_VLAN_CTAG_FILTER;
+	netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
 }
 
 static void fjes_irq_watch_task(struct work_struct *work)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 027/101] drm/radeon/si: add dpm quirk for Oland

[alexander.levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 0f424de1fd9bc4ab24bd1fe5430ab5618e803e31 ]

OLAND 0x1002:0x6604 0x1028:0x066F 0x00 seems to have problems
with higher sclks.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/gpu/drm/radeon/si_dpm.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c
index b6f16804e73b..c42430bd3ac2 100644
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -3029,6 +3029,12 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev,
 			max_sclk = 75000;
 			max_mclk = 80000;
 		}
+	} else if (rdev->family == CHIP_OLAND) {
+		if ((rdev->pdev->device == 0x6604) &&
+		    (rdev->pdev->subsystem_vendor == 0x1028) &&
+		    (rdev->pdev->subsystem_device == 0x066F)) {
+			max_sclk = 75000;
+		}
 	}
 	/* Apply dpm quirks */
 	while (p && p->chip_device != 0) {
-- 
2.11.0

[PATCH AUTOSEL for 4.4 028/101] sched/deadline: Make sure the replenishment timer fires in the next period

[alexander.levin]

From: Daniel Bristot de Oliveira <bristot@redhat.com>

[ Upstream commit 5ac69d37784b237707a7b15d199cdb6c6fdb6780 ]

Currently, the replenishment timer is set to fire at the deadline
of a task. Although that works for implicit deadline tasks because the
deadline is equals to the begin of the next period, that is not correct
for constrained deadline tasks (deadline < period).

For instance:

f.c:
 --------------- %< ---------------
int main (void)
{
	for(;;);
}
 --------------- >% ---------------

  # gcc -o f f.c

  # trace-cmd record -e sched:sched_switch                              \
				   -e syscalls:sys_exit_sched_setattr   \
   chrt -d --sched-runtime  490000000					\
           --sched-deadline 500000000					\
	   --sched-period  1000000000 0 ./f

  # trace-cmd report | grep "{pid of ./f}"

After setting parameters, the task is replenished and continue running
until being throttled:

         f-11295 [003] 13322.113776: sys_exit_sched_setattr: 0x0

The task is throttled after running 492318 ms, as expected:

         f-11295 [003] 13322.606094: sched_switch:   f:11295 [-1] R ==> watchdog/3:32 [0]

But then, the task is replenished 500719 ms after the first
replenishment:

    <idle>-0     [003] 13322.614495: sched_switch:   swapper/3:0 [120] R ==> f:11295 [-1]

Running for 490277 ms:

         f-11295 [003] 13323.104772: sched_switch:   f:11295 [-1] R ==>  swapper/3:0 [120]

Hence, in the first period, the task runs 2 * runtime, and that is a bug.

During the first replenishment, the next deadline is set one period away.
So the runtime / period starts to be respected. However, as the second
replenishment took place in the wrong instant, the next replenishment
will also be held in a wrong instant of time. Rather than occurring in
the nth period away from the first activation, it is taking place
in the (nth period - relative deadline).

Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Luca Abeni <luca.abeni@santannapisa.it>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/ac50d89887c25285b47465638354b63362f8adff.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 kernel/sched/deadline.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
index e984f059e5fc..a428f7e6f5e9 100644
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -510,10 +510,15 @@ static void update_dl_entity(struct sched_dl_entity *dl_se,
 	}
 }
 
+static inline u64 dl_next_period(struct sched_dl_entity *dl_se)
+{
+	return dl_se->deadline - dl_se->dl_deadline + dl_se->dl_period;
+}
+
 /*
  * If the entity depleted all its runtime, and if we want it to sleep
  * while waiting for some new execution time to become available, we
- * set the bandwidth enforcement timer to the replenishment instant
+ * set the bandwidth replenishment timer to the replenishment instant
  * and try to activate it.
  *
  * Notice that it is important for the caller to know if the timer
@@ -535,7 +540,7 @@ static int start_dl_timer(struct task_struct *p)
 	 * that it is actually coming from rq->clock and not from
 	 * hrtimer's time base reading.
 	 */
-	act = ns_to_ktime(dl_se->deadline);
+	act = ns_to_ktime(dl_next_period(dl_se));
 	now = hrtimer_cb_get_time(timer);
 	delta = ktime_to_ns(now) - rq_clock(rq);
 	act = ktime_add_ns(act, delta);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 029/101] sched/deadline: Throttle a constrained deadline task activated after the deadline

[alexander.levin]

From: Daniel Bristot de Oliveira <bristot@redhat.com>

[ Upstream commit df8eac8cafce7d086be3bd5cf5a838fa37594dfb ]

During the activation, CBS checks if it can reuse the current task's
runtime and period. If the deadline of the task is in the past, CBS
cannot use the runtime, and so it replenishes the task. This rule
works fine for implicit deadline tasks (deadline == period), and the
CBS was designed for implicit deadline tasks. However, a task with
constrained deadline (deadine < period) might be awakened after the
deadline, but before the next period. In this case, replenishing the
task would allow it to run for runtime / deadline. As in this case
deadline < period, CBS enables a task to run for more than the
runtime / period. In a very loaded system, this can cause a domino
effect, making other tasks miss their deadlines.

To avoid this problem, in the activation of a constrained deadline
task after the deadline but before the next period, throttle the
task and set the replenishing timer to the begin of the next period,
unless it is boosted.

Reproducer:

 --------------- %< ---------------
  int main (int argc, char **argv)
  {
	int ret;
	int flags = 0;
	unsigned long l = 0;
	struct timespec ts;
	struct sched_attr attr;

	memset(&attr, 0, sizeof(attr));
	attr.size = sizeof(attr);

	attr.sched_policy   = SCHED_DEADLINE;
	attr.sched_runtime  = 2 * 1000 * 1000;		/* 2 ms */
	attr.sched_deadline = 2 * 1000 * 1000;		/* 2 ms */
	attr.sched_period   = 2 * 1000 * 1000 * 1000;	/* 2 s */

	ts.tv_sec = 0;
	ts.tv_nsec = 2000 * 1000;			/* 2 ms */

	ret = sched_setattr(0, &attr, flags);

	if (ret < 0) {
		perror("sched_setattr");
		exit(-1);
	}

	for(;;) {
		/* XXX: you may need to adjust the loop */
		for (l = 0; l < 150000; l++);
		/*
		 * The ideia is to go to sleep right before the deadline
		 * and then wake up before the next period to receive
		 * a new replenishment.
		 */
		nanosleep(&ts, NULL);
	}

	exit(0);
  }
  --------------- >% ---------------

On my box, this reproducer uses almost 50% of the CPU time, which is
obviously wrong for a task with 2/2000 reservation.

Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/edf58354e01db46bf42df8d2dd32418833f68c89.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 kernel/sched/deadline.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
index a428f7e6f5e9..95cc139af11b 100644
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -704,6 +704,37 @@ void init_dl_task_timer(struct sched_dl_entity *dl_se)
 	timer->function = dl_task_timer;
 }
 
+/*
+ * During the activation, CBS checks if it can reuse the current task's
+ * runtime and period. If the deadline of the task is in the past, CBS
+ * cannot use the runtime, and so it replenishes the task. This rule
+ * works fine for implicit deadline tasks (deadline == period), and the
+ * CBS was designed for implicit deadline tasks. However, a task with
+ * constrained deadline (deadine < period) might be awakened after the
+ * deadline, but before the next period. In this case, replenishing the
+ * task would allow it to run for runtime / deadline. As in this case
+ * deadline < period, CBS enables a task to run for more than the
+ * runtime / period. In a very loaded system, this can cause a domino
+ * effect, making other tasks miss their deadlines.
+ *
+ * To avoid this problem, in the activation of a constrained deadline
+ * task after the deadline but before the next period, throttle the
+ * task and set the replenishing timer to the begin of the next period,
+ * unless it is boosted.
+ */
+static inline void dl_check_constrained_dl(struct sched_dl_entity *dl_se)
+{
+	struct task_struct *p = dl_task_of(dl_se);
+	struct rq *rq = rq_of_dl_rq(dl_rq_of_se(dl_se));
+
+	if (dl_time_before(dl_se->deadline, rq_clock(rq)) &&
+	    dl_time_before(rq_clock(rq), dl_next_period(dl_se))) {
+		if (unlikely(dl_se->dl_boosted || !start_dl_timer(p)))
+			return;
+		dl_se->dl_throttled = 1;
+	}
+}
+
 static
 int dl_runtime_exceeded(struct sched_dl_entity *dl_se)
 {
@@ -958,6 +989,11 @@ static void dequeue_dl_entity(struct sched_dl_entity *dl_se)
 	__dequeue_dl_entity(dl_se);
 }
 
+static inline bool dl_is_constrained(struct sched_dl_entity *dl_se)
+{
+	return dl_se->dl_deadline < dl_se->dl_period;
+}
+
 static void enqueue_task_dl(struct rq *rq, struct task_struct *p, int flags)
 {
 	struct task_struct *pi_task = rt_mutex_get_top_task(p);
@@ -984,6 +1020,15 @@ static void enqueue_task_dl(struct rq *rq, struct task_struct *p, int flags)
 	}
 
 	/*
+	 * Check if a constrained deadline task was activated
+	 * after the deadline but before the next period.
+	 * If that is the case, the task will be throttled and
+	 * the replenishment timer will be set to the next period.
+	 */
+	if (!p->dl.dl_throttled && dl_is_constrained(&p->dl))
+		dl_check_constrained_dl(&p->dl);
+
+	/*
 	 * If p is throttled, we do nothing. In fact, if it exhausted
 	 * its budget it needs a replenishment and, since it now is on
 	 * its rq, the bandwidth timer callback (which clearly has not
-- 
2.11.0

[PATCH AUTOSEL for 4.4 031/101] mmc: mediatek: Fixed bug where clock frequency could be set wrong

[alexander.levin]

From: yong mao <yong.mao@mediatek.com>

[ Upstream commit 40ceda09c8c84694c2ca6b00bcc6dc71e8e62d96 ]

This patch can fix two issues:

Issue 1:
In previous code, div may be overflow when setting clock frequency
as f_min. We can use DIV_ROUND_UP to fix this boundary related
issue.

Issue 2:
In previous code, we can not set the correct clock frequency when
div equals 0xff.

Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/mmc/host/mtk-sd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 33dfd7e72516..0bf0d0e9dbdb 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -570,7 +570,7 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
 		}
 	}
 	sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
-			(mode << 8) | (div % 0xff));
+		      (mode << 8) | div);
 	sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
 	while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
 		cpu_relax();
@@ -1540,7 +1540,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
 	host->src_clk_freq = clk_get_rate(host->src_clk);
 	/* Set host parameters to mmc */
 	mmc->ops = &mt_msdc_ops;
-	mmc->f_min = host->src_clk_freq / (4 * 255);
+	mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
 
 	mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
 	mmc->caps |= MMC_CAP_RUNTIME_RESUME;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 032/101] drm/radeon: reinstate oland workaround for sclk

[alexander.levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 66822d815ae61ecb2d9dba9031517e8a8476969d ]

Higher sclks seem to be unstable on some boards.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=100222

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/gpu/drm/radeon/si_dpm.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c
index c42430bd3ac2..d9007cc37be1 100644
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -3030,9 +3030,13 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev,
 			max_mclk = 80000;
 		}
 	} else if (rdev->family == CHIP_OLAND) {
-		if ((rdev->pdev->device == 0x6604) &&
-		    (rdev->pdev->subsystem_vendor == 0x1028) &&
-		    (rdev->pdev->subsystem_device == 0x066F)) {
+		if ((rdev->pdev->revision == 0xC7) ||
+		    (rdev->pdev->revision == 0x80) ||
+		    (rdev->pdev->revision == 0x81) ||
+		    (rdev->pdev->revision == 0x83) ||
+		    (rdev->pdev->revision == 0x87) ||
+		    (rdev->pdev->device == 0x6604) ||
+		    (rdev->pdev->device == 0x6605)) {
 			max_sclk = 75000;
 		}
 	}
-- 
2.11.0

[PATCH AUTOSEL for 4.4 033/101] afs: Fix missing put_page()

[alexander.levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 29c8bbbd6e21daa0997d1c3ee886b897ee7ad652 ]

In afs_writepages_region(), inside the loop where we find dirty pages to
deal with, one of the if-statements is missing a put_page().

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/afs/write.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/afs/write.c b/fs/afs/write.c
index 0714abcd7f32..777ea2bbf401 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -503,6 +503,7 @@ static int afs_writepages_region(struct address_space *mapping,
 
 		if (PageWriteback(page) || !PageDirty(page)) {
 			unlock_page(page);
+			put_page(page);
 			continue;
 		}
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 030/101] sched/deadline: Use deadline instead of period when calculating overflow

[alexander.levin]

From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

[ Upstream commit 2317d5f1c34913bac5971d93d69fb6c31bb74670 ]

I was testing Daniel's changes with his test case, and tweaked it a
little. Instead of having the runtime equal to the deadline, I
increased the deadline ten fold.

Daniel's test case had:

	attr.sched_runtime  = 2 * 1000 * 1000;		/* 2 ms */
	attr.sched_deadline = 2 * 1000 * 1000;		/* 2 ms */
	attr.sched_period   = 2 * 1000 * 1000 * 1000;	/* 2 s */

To make it more interesting, I changed it to:

	attr.sched_runtime  =  2 * 1000 * 1000;		/* 2 ms */
	attr.sched_deadline = 20 * 1000 * 1000;		/* 20 ms */
	attr.sched_period   =  2 * 1000 * 1000 * 1000;	/* 2 s */

The results were rather surprising. The behavior that Daniel's patch
was fixing came back. The task started using much more than .1% of the
CPU. More like 20%.

Looking into this I found that it was due to the dl_entity_overflow()
constantly returning true. That's because it uses the relative period
against relative runtime vs the absolute deadline against absolute
runtime.

  runtime / (deadline - t) > dl_runtime / dl_period

There's even a comment mentioning this, and saying that when relative
deadline equals relative period, that the equation is the same as using
deadline instead of period. That comment is backwards! What we really
want is:

  runtime / (deadline - t) > dl_runtime / dl_deadline

We care about if the runtime can make its deadline, not its period. And
then we can say "when the deadline equals the period, the equation is
the same as using dl_period instead of dl_deadline".

After correcting this, now when the task gets enqueued, it can throttle
correctly, and Daniel's fix to the throttling of sleeping deadline
tasks works even when the runtime and deadline are not the same.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/02135a27f1ae3fe5fd032568a5a2f370e190e8d7.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 kernel/sched/deadline.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
index 95cc139af11b..a996f7356216 100644
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -441,13 +441,13 @@ static void replenish_dl_entity(struct sched_dl_entity *dl_se,
  *
  * This function returns true if:
  *
- *   runtime / (deadline - t) > dl_runtime / dl_period ,
+ *   runtime / (deadline - t) > dl_runtime / dl_deadline ,
  *
  * IOW we can't recycle current parameters.
  *
- * Notice that the bandwidth check is done against the period. For
+ * Notice that the bandwidth check is done against the deadline. For
  * task with deadline equal to period this is the same of using
- * dl_deadline instead of dl_period in the equation above.
+ * dl_period instead of dl_deadline in the equation above.
  */
 static bool dl_entity_overflow(struct sched_dl_entity *dl_se,
 			       struct sched_dl_entity *pi_se, u64 t)
@@ -472,7 +472,7 @@ static bool dl_entity_overflow(struct sched_dl_entity *dl_se,
 	 * of anything below microseconds resolution is actually fiction
 	 * (but still we want to give the user that illusion >;).
 	 */
-	left = (pi_se->dl_period >> DL_SCALE) * (dl_se->runtime >> DL_SCALE);
+	left = (pi_se->dl_deadline >> DL_SCALE) * (dl_se->runtime >> DL_SCALE);
 	right = ((dl_se->deadline - t) >> DL_SCALE) *
 		(pi_se->dl_runtime >> DL_SCALE);
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 037/101] afs: Migrate vlocation fields to 64-bit

[alexander.levin]

From: Tina Ruchandani <ruchandani.tina@gmail.com>

[ Upstream commit 8a79790bf0b7da216627ffb85f52cfb4adbf1e4e ]

get_seconds() returns real wall-clock seconds. On 32-bit systems
this value will overflow in year 2038 and beyond. This patch changes
afs's vlocation record to use ktime_get_real_seconds() instead, for the
fields time_of_death and update_at.

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/afs/callback.c  |  7 ++++---
 fs/afs/internal.h  |  7 ++++---
 fs/afs/server.c    |  6 +++---
 fs/afs/vlocation.c | 16 +++++++++-------
 4 files changed, 20 insertions(+), 16 deletions(-)

diff --git a/fs/afs/callback.c b/fs/afs/callback.c
index 7ef637d7f3a5..7d54efd73519 100644
--- a/fs/afs/callback.c
+++ b/fs/afs/callback.c
@@ -362,7 +362,7 @@ static void afs_callback_updater(struct work_struct *work)
 {
 	struct afs_server *server;
 	struct afs_vnode *vnode, *xvnode;
-	time_t now;
+	time64_t now;
 	long timeout;
 	int ret;
 
@@ -370,7 +370,7 @@ static void afs_callback_updater(struct work_struct *work)
 
 	_enter("");
 
-	now = get_seconds();
+	now = ktime_get_real_seconds();
 
 	/* find the first vnode to update */
 	spin_lock(&server->cb_lock);
@@ -424,7 +424,8 @@ static void afs_callback_updater(struct work_struct *work)
 
 	/* and then reschedule */
 	_debug("reschedule");
-	vnode->update_at = get_seconds() + afs_vnode_update_timeout;
+	vnode->update_at = ktime_get_real_seconds() +
+			afs_vnode_update_timeout;
 
 	spin_lock(&server->cb_lock);
 
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 5cb5c320b966..c671cdb3acad 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -11,6 +11,7 @@
 
 #include <linux/compiler.h>
 #include <linux/kernel.h>
+#include <linux/ktime.h>
 #include <linux/fs.h>
 #include <linux/pagemap.h>
 #include <linux/skbuff.h>
@@ -247,7 +248,7 @@ struct afs_cache_vhash {
  */
 struct afs_vlocation {
 	atomic_t		usage;
-	time_t			time_of_death;	/* time at which put reduced usage to 0 */
+	time64_t		time_of_death;	/* time at which put reduced usage to 0 */
 	struct list_head	link;		/* link in cell volume location list */
 	struct list_head	grave;		/* link in master graveyard list */
 	struct list_head	update;		/* link in master update list */
@@ -258,7 +259,7 @@ struct afs_vlocation {
 	struct afs_cache_vlocation vldb;	/* volume information DB record */
 	struct afs_volume	*vols[3];	/* volume access record pointer (index by type) */
 	wait_queue_head_t	waitq;		/* status change waitqueue */
-	time_t			update_at;	/* time at which record should be updated */
+	time64_t		update_at;	/* time at which record should be updated */
 	spinlock_t		lock;		/* access lock */
 	afs_vlocation_state_t	state;		/* volume location state */
 	unsigned short		upd_rej_cnt;	/* ENOMEDIUM count during update */
@@ -271,7 +272,7 @@ struct afs_vlocation {
  */
 struct afs_server {
 	atomic_t		usage;
-	time_t			time_of_death;	/* time at which put reduced usage to 0 */
+	time64_t		time_of_death;	/* time at which put reduced usage to 0 */
 	struct in_addr		addr;		/* server address */
 	struct afs_cell		*cell;		/* cell in which server resides */
 	struct list_head	link;		/* link in cell's server list */
diff --git a/fs/afs/server.c b/fs/afs/server.c
index f342acf3547d..3bc1a46f0bd6 100644
--- a/fs/afs/server.c
+++ b/fs/afs/server.c
@@ -237,7 +237,7 @@ void afs_put_server(struct afs_server *server)
 	spin_lock(&afs_server_graveyard_lock);
 	if (atomic_read(&server->usage) == 0) {
 		list_move_tail(&server->grave, &afs_server_graveyard);
-		server->time_of_death = get_seconds();
+		server->time_of_death = ktime_get_real_seconds();
 		queue_delayed_work(afs_wq, &afs_server_reaper,
 				   afs_server_timeout * HZ);
 	}
@@ -272,9 +272,9 @@ static void afs_reap_server(struct work_struct *work)
 	LIST_HEAD(corpses);
 	struct afs_server *server;
 	unsigned long delay, expiry;
-	time_t now;
+	time64_t now;
 
-	now = get_seconds();
+	now = ktime_get_real_seconds();
 	spin_lock(&afs_server_graveyard_lock);
 
 	while (!list_empty(&afs_server_graveyard)) {
diff --git a/fs/afs/vlocation.c b/fs/afs/vlocation.c
index 52976785a32c..ee9015c0db5a 100644
--- a/fs/afs/vlocation.c
+++ b/fs/afs/vlocation.c
@@ -340,7 +340,8 @@ static void afs_vlocation_queue_for_updates(struct afs_vlocation *vl)
 	struct afs_vlocation *xvl;
 
 	/* wait at least 10 minutes before updating... */
-	vl->update_at = get_seconds() + afs_vlocation_update_timeout;
+	vl->update_at = ktime_get_real_seconds() +
+			afs_vlocation_update_timeout;
 
 	spin_lock(&afs_vlocation_updates_lock);
 
@@ -506,7 +507,7 @@ void afs_put_vlocation(struct afs_vlocation *vl)
 	if (atomic_read(&vl->usage) == 0) {
 		_debug("buried");
 		list_move_tail(&vl->grave, &afs_vlocation_graveyard);
-		vl->time_of_death = get_seconds();
+		vl->time_of_death = ktime_get_real_seconds();
 		queue_delayed_work(afs_wq, &afs_vlocation_reap,
 				   afs_vlocation_timeout * HZ);
 
@@ -543,11 +544,11 @@ static void afs_vlocation_reaper(struct work_struct *work)
 	LIST_HEAD(corpses);
 	struct afs_vlocation *vl;
 	unsigned long delay, expiry;
-	time_t now;
+	time64_t now;
 
 	_enter("");
 
-	now = get_seconds();
+	now = ktime_get_real_seconds();
 	spin_lock(&afs_vlocation_graveyard_lock);
 
 	while (!list_empty(&afs_vlocation_graveyard)) {
@@ -622,13 +623,13 @@ static void afs_vlocation_updater(struct work_struct *work)
 {
 	struct afs_cache_vlocation vldb;
 	struct afs_vlocation *vl, *xvl;
-	time_t now;
+	time64_t now;
 	long timeout;
 	int ret;
 
 	_enter("");
 
-	now = get_seconds();
+	now = ktime_get_real_seconds();
 
 	/* find a record to update */
 	spin_lock(&afs_vlocation_updates_lock);
@@ -684,7 +685,8 @@ static void afs_vlocation_updater(struct work_struct *work)
 
 	/* and then reschedule */
 	_debug("reschedule");
-	vl->update_at = get_seconds() + afs_vlocation_update_timeout;
+	vl->update_at = ktime_get_real_seconds() +
+			afs_vlocation_update_timeout;
 
 	spin_lock(&afs_vlocation_updates_lock);
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 036/101] afs: Flush outstanding writes when an fd is closed

[alexander.levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 58fed94dfb17e89556b5705f20f90e5b2971b6a1 ]

Flush outstanding writes in afs when an fd is closed.  This is what NFS and
CIFS do.

Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/afs/file.c     |  1 +
 fs/afs/internal.h |  1 +
 fs/afs/write.c    | 14 ++++++++++++++
 3 files changed, 16 insertions(+)

diff --git a/fs/afs/file.c b/fs/afs/file.c
index 999bc3caec92..cf8a07e282a6 100644
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -29,6 +29,7 @@ static int afs_readpages(struct file *filp, struct address_space *mapping,
 
 const struct file_operations afs_file_operations = {
 	.open		= afs_open,
+	.flush		= afs_flush,
 	.release	= afs_release,
 	.llseek		= generic_file_llseek,
 	.read_iter	= generic_file_read_iter,
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 71d5982312f3..5cb5c320b966 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -749,6 +749,7 @@ extern int afs_writepages(struct address_space *, struct writeback_control *);
 extern void afs_pages_written_back(struct afs_vnode *, struct afs_call *);
 extern ssize_t afs_file_write(struct kiocb *, struct iov_iter *);
 extern int afs_writeback_all(struct afs_vnode *);
+extern int afs_flush(struct file *, fl_owner_t);
 extern int afs_fsync(struct file *, loff_t, loff_t, int);
 
 
diff --git a/fs/afs/write.c b/fs/afs/write.c
index 777ea2bbf401..cc46e8c1d46e 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -741,6 +741,20 @@ out:
 }
 
 /*
+ * Flush out all outstanding writes on a file opened for writing when it is
+ * closed.
+ */
+int afs_flush(struct file *file, fl_owner_t id)
+{
+	_enter("");
+
+	if ((file->f_mode & FMODE_WRITE) == 0)
+		return 0;
+
+	return vfs_fsync(file, 0);
+}
+
+/*
  * notification that a previously read-only page is about to become writable
  * - if it returns an error, the caller will deliver a bus error signal
  */
-- 
2.11.0

[PATCH AUTOSEL for 4.4 034/101] afs: Populate group ID from vnode status

[alexander.levin]

From: Marc Dionne <marc.dionne@auristor.com>

[ Upstream commit 6186f0788b31f44affceeedc7b48eb10faea120d ]

The group was hard coded to GLOBAL_ROOT_GID; use the group
ID that was received from the server.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/afs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index e06f5a23352a..9580456e8902 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -69,7 +69,7 @@ static int afs_inode_map_status(struct afs_vnode *vnode, struct key *key)
 
 	set_nlink(inode, vnode->status.nlink);
 	inode->i_uid		= vnode->status.owner;
-	inode->i_gid		= GLOBAL_ROOT_GID;
+	inode->i_gid            = vnode->status.group;
 	inode->i_size		= vnode->status.size;
 	inode->i_ctime.tv_sec	= vnode->status.mtime_server;
 	inode->i_ctime.tv_nsec	= 0;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 035/101] afs: Adjust mode bits processing

[alexander.levin]

From: Marc Dionne <marc.dionne@auristor.com>

[ Upstream commit 627f46943ff90bcc32ddeb675d881c043c6fa2ae ]

Mode bits for an afs file should not be enforced in the usual
way.

For files, the absence of user bits can restrict file access
with respect to what is granted by the server.

These bits apply regardless of the owner or the current uid; the
rest of the mode bits (group, other) are ignored.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/afs/security.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/afs/security.c b/fs/afs/security.c
index 8d010422dc89..bfa9d3428383 100644
--- a/fs/afs/security.c
+++ b/fs/afs/security.c
@@ -340,17 +340,22 @@ int afs_permission(struct inode *inode, int mask)
 	} else {
 		if (!(access & AFS_ACE_LOOKUP))
 			goto permission_denied;
+		if ((mask & MAY_EXEC) && !(inode->i_mode & S_IXUSR))
+			goto permission_denied;
 		if (mask & (MAY_EXEC | MAY_READ)) {
 			if (!(access & AFS_ACE_READ))
 				goto permission_denied;
+			if (!(inode->i_mode & S_IRUSR))
+				goto permission_denied;
 		} else if (mask & MAY_WRITE) {
 			if (!(access & AFS_ACE_WRITE))
 				goto permission_denied;
+			if (!(inode->i_mode & S_IWUSR))
+				goto permission_denied;
 		}
 	}
 
 	key_put(key);
-	ret = generic_permission(inode, mask);
 	_leave(" = %d", ret);
 	return ret;
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 039/101] afs: Fix the maths in afs_fs_store_data()

[alexander.levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 146a1192783697810b63a1e41c4d59fc93387340 ]

afs_fs_store_data() works out of the size of the write it's going to make,
but it uses 32-bit unsigned subtraction in one place that gets
automatically cast to loff_t.

However, if to < offset, then the number goes negative, but as the result
isn't signed, this doesn't get sign-extended to 64-bits when placed in a
loff_t.

Fix by casting the operands to loff_t.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/afs/fsclient.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c
index c775fefe3ffe..0c8399e0fdac 100644
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -1225,7 +1225,7 @@ int afs_fs_store_data(struct afs_server *server, struct afs_writeback *wb,
 	_enter(",%x,{%x:%u},,",
 	       key_serial(wb->key), vnode->fid.vid, vnode->fid.vnode);
 
-	size = to - offset;
+	size = (loff_t)to - (loff_t)offset;
 	if (first != last)
 		size += (loff_t)(last - first) << PAGE_SHIFT;
 	pos = (loff_t)first << PAGE_SHIFT;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 041/101] afs: Fix page leak in afs_write_begin()

[alexander.levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 6d06b0d25209c80e99c1e89700f1e09694a3766b ]

afs_write_begin() leaks a ref and a lock on a page if afs_fill_page()
fails.  Fix the leak by unlocking and releasing the page in the error path.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/afs/write.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/fs/afs/write.c b/fs/afs/write.c
index cc46e8c1d46e..d89595155ec9 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -148,12 +148,12 @@ int afs_write_begin(struct file *file, struct address_space *mapping,
 		kfree(candidate);
 		return -ENOMEM;
 	}
-	*pagep = page;
-	/* page won't leak in error case: it eventually gets cleaned off LRU */
 
 	if (!PageUptodate(page) && len != PAGE_CACHE_SIZE) {
 		ret = afs_fill_page(vnode, key, index << PAGE_CACHE_SHIFT, page);
 		if (ret < 0) {
+			unlock_page(page);
+			put_page(page);
 			kfree(candidate);
 			_leave(" = %d [prep]", ret);
 			return ret;
@@ -161,6 +161,9 @@ int afs_write_begin(struct file *file, struct address_space *mapping,
 		SetPageUptodate(page);
 	}
 
+	/* page won't leak in error case: it eventually gets cleaned off LRU */
+	*pagep = page;
+
 try_again:
 	spin_lock(&vnode->writeback_lock);
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 038/101] afs: Prevent callback expiry timer overflow

[alexander.levin]

From: Tina Ruchandani <ruchandani.tina@gmail.com>

[ Upstream commit 56e714312e7dbd6bb83b2f78d3ec19a404c7649f ]

get_seconds() returns real wall-clock seconds. On 32-bit systems
this value will overflow in year 2038 and beyond. This patch changes
afs_vnode record to use ktime_get_real_seconds() instead, for the
fields cb_expires and cb_expires_at.

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/afs/fsclient.c | 2 +-
 fs/afs/inode.c    | 7 ++++---
 fs/afs/internal.h | 4 ++--
 3 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c
index c2e930ec2888..c775fefe3ffe 100644
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -139,7 +139,7 @@ static void xdr_decode_AFSCallBack(const __be32 **_bp, struct afs_vnode *vnode)
 	vnode->cb_version	= ntohl(*bp++);
 	vnode->cb_expiry	= ntohl(*bp++);
 	vnode->cb_type		= ntohl(*bp++);
-	vnode->cb_expires	= vnode->cb_expiry + get_seconds();
+	vnode->cb_expires	= vnode->cb_expiry + ktime_get_real_seconds();
 	*_bp = bp;
 }
 
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 9580456e8902..2d706612f1f5 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -244,12 +244,13 @@ struct inode *afs_iget(struct super_block *sb, struct key *key,
 			vnode->cb_version = 0;
 			vnode->cb_expiry = 0;
 			vnode->cb_type = 0;
-			vnode->cb_expires = get_seconds();
+			vnode->cb_expires = ktime_get_real_seconds();
 		} else {
 			vnode->cb_version = cb->version;
 			vnode->cb_expiry = cb->expiry;
 			vnode->cb_type = cb->type;
-			vnode->cb_expires = vnode->cb_expiry + get_seconds();
+			vnode->cb_expires = vnode->cb_expiry +
+				ktime_get_real_seconds();
 		}
 	}
 
@@ -322,7 +323,7 @@ int afs_validate(struct afs_vnode *vnode, struct key *key)
 	    !test_bit(AFS_VNODE_CB_BROKEN, &vnode->flags) &&
 	    !test_bit(AFS_VNODE_MODIFIED, &vnode->flags) &&
 	    !test_bit(AFS_VNODE_ZAP_DATA, &vnode->flags)) {
-		if (vnode->cb_expires < get_seconds() + 10) {
+		if (vnode->cb_expires < ktime_get_real_seconds() + 10) {
 			_debug("callback expired");
 			set_bit(AFS_VNODE_CB_BROKEN, &vnode->flags);
 		} else {
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index c671cdb3acad..1330b2a695ff 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -375,8 +375,8 @@ struct afs_vnode {
 	struct rb_node		server_rb;	/* link in server->fs_vnodes */
 	struct rb_node		cb_promise;	/* link in server->cb_promises */
 	struct work_struct	cb_broken_work;	/* work to be done on callback break */
-	time_t			cb_expires;	/* time at which callback expires */
-	time_t			cb_expires_at;	/* time used to order cb_promise */
+	time64_t		cb_expires;	/* time at which callback expires */
+	time64_t		cb_expires_at;	/* time used to order cb_promise */
 	unsigned		cb_version;	/* callback version */
 	unsigned		cb_expiry;	/* callback expiry time */
 	afs_callback_type_t	cb_type;	/* type of callback */
-- 
2.11.0

[PATCH AUTOSEL for 4.4 040/101] afs: Populate and use client modification time

[alexander.levin]

From: Marc Dionne <marc.dionne@auristor.com>

[ Upstream commit ab94f5d0dd6fd82e7eeca5e7c8096eaea0a0261f ]

The inode timestamps should be set from the client time
in the status received from the server, rather than the
server time which is meant for internal server use.

Set AFS_SET_MTIME and populate the mtime for operations
that take an input status, such as file/dir creation
and StoreData.  If an input time is not provided the
server will set the vnode times based on the current server
time.

In a situation where the server has some skew with the
client, this could lead to the client seeing a timestamp
in the future for a file that it just created or wrote.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/afs/fsclient.c | 18 +++++++++---------
 fs/afs/inode.c    |  2 +-
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c
index 0c8399e0fdac..10ce44214005 100644
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -105,7 +105,7 @@ static void xdr_decode_AFSFetchStatus(const __be32 **_bp,
 			vnode->vfs_inode.i_mode = mode;
 		}
 
-		vnode->vfs_inode.i_ctime.tv_sec	= status->mtime_server;
+		vnode->vfs_inode.i_ctime.tv_sec	= status->mtime_client;
 		vnode->vfs_inode.i_mtime	= vnode->vfs_inode.i_ctime;
 		vnode->vfs_inode.i_atime	= vnode->vfs_inode.i_ctime;
 		vnode->vfs_inode.i_version	= data_version;
@@ -703,8 +703,8 @@ int afs_fs_create(struct afs_server *server,
 		memset(bp, 0, padsz);
 		bp = (void *) bp + padsz;
 	}
-	*bp++ = htonl(AFS_SET_MODE);
-	*bp++ = 0; /* mtime */
+	*bp++ = htonl(AFS_SET_MODE | AFS_SET_MTIME);
+	*bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */
 	*bp++ = 0; /* owner */
 	*bp++ = 0; /* group */
 	*bp++ = htonl(mode & S_IALLUGO); /* unix mode */
@@ -981,8 +981,8 @@ int afs_fs_symlink(struct afs_server *server,
 		memset(bp, 0, c_padsz);
 		bp = (void *) bp + c_padsz;
 	}
-	*bp++ = htonl(AFS_SET_MODE);
-	*bp++ = 0; /* mtime */
+	*bp++ = htonl(AFS_SET_MODE | AFS_SET_MTIME);
+	*bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */
 	*bp++ = 0; /* owner */
 	*bp++ = 0; /* group */
 	*bp++ = htonl(S_IRWXUGO); /* unix mode */
@@ -1192,8 +1192,8 @@ static int afs_fs_store_data64(struct afs_server *server,
 	*bp++ = htonl(vnode->fid.vnode);
 	*bp++ = htonl(vnode->fid.unique);
 
-	*bp++ = 0; /* mask */
-	*bp++ = 0; /* mtime */
+	*bp++ = htonl(AFS_SET_MTIME); /* mask */
+	*bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */
 	*bp++ = 0; /* owner */
 	*bp++ = 0; /* group */
 	*bp++ = 0; /* unix mode */
@@ -1269,8 +1269,8 @@ int afs_fs_store_data(struct afs_server *server, struct afs_writeback *wb,
 	*bp++ = htonl(vnode->fid.vnode);
 	*bp++ = htonl(vnode->fid.unique);
 
-	*bp++ = 0; /* mask */
-	*bp++ = 0; /* mtime */
+	*bp++ = htonl(AFS_SET_MTIME); /* mask */
+	*bp++ = htonl(vnode->vfs_inode.i_mtime.tv_sec); /* mtime */
 	*bp++ = 0; /* owner */
 	*bp++ = 0; /* group */
 	*bp++ = 0; /* unix mode */
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 2d706612f1f5..f8fa92b1d43c 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -71,7 +71,7 @@ static int afs_inode_map_status(struct afs_vnode *vnode, struct key *key)
 	inode->i_uid		= vnode->status.owner;
 	inode->i_gid            = vnode->status.group;
 	inode->i_size		= vnode->status.size;
-	inode->i_ctime.tv_sec	= vnode->status.mtime_server;
+	inode->i_ctime.tv_sec	= vnode->status.mtime_client;
 	inode->i_ctime.tv_nsec	= 0;
 	inode->i_atime		= inode->i_mtime = inode->i_ctime;
 	inode->i_blocks		= 0;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 042/101] afs: Fix afs_kill_pages()

[alexander.levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 7286a35e893176169b09715096a4aca557e2ccd2 ]

Fix afs_kill_pages() in two ways:

 (1) If a writeback has been partially flushed, then if we try and kill the
     pages it contains, some of them may no longer be undergoing writeback
     and end_page_writeback() will assert.

     Fix this by checking to see whether the page in question is actually
     undergoing writeback before ending that writeback.

 (2) The loop that scans for pages to kill doesn't increase the first page
     index, and so the loop may not terminate, but it will try to process
     the same pages over and over again.

     Fix this by increasing the first page index to one after the last page
     we processed.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/afs/write.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/fs/afs/write.c b/fs/afs/write.c
index d89595155ec9..5cfc05ca184c 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -299,10 +299,14 @@ static void afs_kill_pages(struct afs_vnode *vnode, bool error,
 		ASSERTCMP(pv.nr, ==, count);
 
 		for (loop = 0; loop < count; loop++) {
-			ClearPageUptodate(pv.pages[loop]);
+			struct page *page = pv.pages[loop];
+			ClearPageUptodate(page);
 			if (error)
-				SetPageError(pv.pages[loop]);
-			end_page_writeback(pv.pages[loop]);
+				SetPageError(page);
+			if (PageWriteback(page))
+				end_page_writeback(page);
+			if (page->index >= first)
+				first = page->index + 1;
 		}
 
 		__pagevec_release(&pv);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 045/101] efi/esrt: Cleanup bad memory map log messages

[alexander.levin]

From: Daniel Drake <drake@endlessm.com>

[ Upstream commit 822f5845f710e57d7e2df1fd1ee00d6e19d334fe ]

The Intel Compute Stick STCK1A8LFC and Weibu F3C platforms both
log 2 error messages during boot:

   efi: requested map not found.
   esrt: ESRT header is not in the memory map.

Searching the web, this seems to affect many other platforms too.
Since these messages are logged as errors, they appear on-screen during
the boot process even when using the "quiet" boot parameter used by
distros.

Demote the ESRT error to a warning so that it does not appear on-screen,
and delete the error logging from efi_mem_desc_lookup; both callsites
of that function log more specific messages upon failure.

Out of curiosity I looked closer at the Weibu F3C. There is no entry in
the UEFI-provided memory map which corresponds to the ESRT pointer, but
hacking the code to map it anyway, the ESRT does appear to be valid with
2 entries.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/firmware/efi/efi.c  | 1 -
 drivers/firmware/efi/esrt.c | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index 0cd8f039602e..d2a3b5885c44 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -311,7 +311,6 @@ int __init efi_mem_desc_lookup(u64 phys_addr, efi_memory_desc_t *out_md)
 
 		early_memunmap(md, sizeof (*md));
 	}
-	pr_err_once("requested map not found.\n");
 	return -ENOENT;
 }
 
diff --git a/drivers/firmware/efi/esrt.c b/drivers/firmware/efi/esrt.c
index 22c5285f7705..3056b18943d0 100644
--- a/drivers/firmware/efi/esrt.c
+++ b/drivers/firmware/efi/esrt.c
@@ -256,7 +256,7 @@ void __init efi_esrt_init(void)
 
 	rc = efi_mem_desc_lookup(efi.esrt, &md);
 	if (rc < 0) {
-		pr_err("ESRT header is not in the memory map.\n");
+		pr_warn("ESRT header is not in the memory map.\n");
 		return;
 	}
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 043/101] net/mlx4_core: Avoid delays during VF driver device shutdown

[alexander.levin]

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

[ Upstream commit 4cbe4dac82e423ecc9a0ba46af24a860853259f4 ]

Some Hypervisors detach VFs from VMs by instantly causing an FLR event
to be generated for a VF.

In the mlx4 case, this will cause that VF's comm channel to be disabled
before the VM has an opportunity to invoke the VF device's "shutdown"
method.

For such Hypervisors, there is a race condition between the VF's
shutdown method and its internal-error detection/reset thread.

The internal-error detection/reset thread (which runs every 5 seconds) also
detects a disabled comm channel. If the internal-error detection/reset
flow wins the race, we still get delays (while that flow tries repeatedly
to detect comm-channel recovery).

The cited commit fixed the command timeout problem when the
internal-error detection/reset flow loses the race.

This commit avoids the unneeded delays when the internal-error
detection/reset flow wins.

Fixes: d585df1c5ccf ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reported-by: Simon Xiao <sixiao@microsoft.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/mellanox/mlx4/cmd.c  | 11 +++++++++++
 drivers/net/ethernet/mellanox/mlx4/main.c | 11 +++++++++++
 include/linux/mlx4/device.h               |  1 +
 3 files changed, 23 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index d48d5793407d..fc222df47aa9 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -2278,6 +2278,17 @@ static int sync_toggles(struct mlx4_dev *dev)
 		rd_toggle = swab32(readl(&priv->mfunc.comm->slave_read));
 		if (wr_toggle == 0xffffffff || rd_toggle == 0xffffffff) {
 			/* PCI might be offline */
+
+			/* If device removal has been requested,
+			 * do not continue retrying.
+			 */
+			if (dev->persist->interface_state &
+			    MLX4_INTERFACE_STATE_NOWAIT) {
+				mlx4_warn(dev,
+					  "communication channel is offline\n");
+				return -EIO;
+			}
+
 			msleep(100);
 			wr_toggle = swab32(readl(&priv->mfunc.comm->
 					   slave_write));
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 99361352ed0d..a7d3144c2388 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1763,6 +1763,14 @@ static int mlx4_comm_check_offline(struct mlx4_dev *dev)
 			       (u32)(1 << COMM_CHAN_OFFLINE_OFFSET));
 		if (!offline_bit)
 			return 0;
+
+		/* If device removal has been requested,
+		 * do not continue retrying.
+		 */
+		if (dev->persist->interface_state &
+		    MLX4_INTERFACE_STATE_NOWAIT)
+			break;
+
 		/* There are cases as part of AER/Reset flow that PF needs
 		 * around 100 msec to load. We therefore sleep for 100 msec
 		 * to allow other tasks to make use of that CPU during this
@@ -3690,6 +3698,9 @@ static void mlx4_remove_one(struct pci_dev *pdev)
 	struct mlx4_priv *priv = mlx4_priv(dev);
 	int active_vfs = 0;
 
+	if (mlx4_is_slave(dev))
+		persist->interface_state |= MLX4_INTERFACE_STATE_NOWAIT;
+
 	mutex_lock(&persist->interface_state_mutex);
 	persist->interface_state |= MLX4_INTERFACE_STATE_DELETION;
 	mutex_unlock(&persist->interface_state_mutex);
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index d3133be12d92..7fde8af9b87e 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -460,6 +460,7 @@ enum {
 enum {
 	MLX4_INTERFACE_STATE_UP		= 1 << 0,
 	MLX4_INTERFACE_STATE_DELETION	= 1 << 1,
+	MLX4_INTERFACE_STATE_NOWAIT	= 1 << 2,
 };
 
 #define MSTR_SM_CHANGE_MASK (MLX4_EQ_PORT_INFO_MSTR_SM_SL_CHANGE_MASK | \
-- 
2.11.0

[PATCH AUTOSEL for 4.4 044/101] perf symbols: Fix symbols__fixup_end heuristic for corner cases

[alexander.levin]

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit e7ede72a6d40cb3a30c087142d79381ca8a31dab ]

The current symbols__fixup_end() heuristic for the last entry in the rb
tree is suboptimal as it leads to not being able to recognize the symbol
in the call graph in a couple of corner cases, for example:

 i) If the symbol has a start address (f.e. exposed via kallsyms)
    that is at a page boundary, then the roundup(curr->start, 4096)
    for the last entry will result in curr->start == curr->end with
    a symbol length of zero.

ii) If the symbol has a start address that is shortly before a page
    boundary, then also here, curr->end - curr->start will just be
    very few bytes, where it's unrealistic that we could perform a
    match against.

Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so
that we can catch such corner cases and have a better chance to find
that specific symbol. It's still just best effort as the real end of the
symbol is unknown to us (and could even be at a larger offset than the
current range), but better than the current situation.

Alexei reported that he recently run into case i) with a JITed eBPF
program (these are all page aligned) as the last symbol which wasn't
properly shown in the call graph (while other eBPF program symbols in
the rb tree were displayed correctly). Since this is a generic issue,
lets try to improve the heuristic a bit.

Reported-and-Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup")
Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 tools/perf/util/symbol.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 520a32a12f8a..415be561fad3 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -200,7 +200,7 @@ void symbols__fixup_end(struct rb_root *symbols)
 
 	/* Last entry */
 	if (curr->end == curr->start)
-		curr->end = roundup(curr->start, 4096);
+		curr->end = roundup(curr->start, 4096) + 4096;
 }
 
 void __map_groups__fixup_end(struct map_groups *mg, enum map_type type)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 046/101] NFSv4.1 respect server's max size in CREATE_SESSION

[alexander.levin]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit 033853325fe3bdc70819a8b97915bd3bca41d3af ]

Currently client doesn't respect max sizes server returns in CREATE_SESSION.
nfs4_session_set_rwsize() gets called and server->rsize, server->wsize are 0
so they never get set to the sizes returned by the server.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/nfs/nfs4client.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index 10410e8b5853..63498e1a542a 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -895,9 +895,9 @@ static void nfs4_session_set_rwsize(struct nfs_server *server)
 	server_resp_sz = sess->fc_attrs.max_resp_sz - nfs41_maxread_overhead;
 	server_rqst_sz = sess->fc_attrs.max_rqst_sz - nfs41_maxwrite_overhead;
 
-	if (server->rsize > server_resp_sz)
+	if (!server->rsize || server->rsize > server_resp_sz)
 		server->rsize = server_resp_sz;
-	if (server->wsize > server_rqst_sz)
+	if (!server->wsize || server->wsize > server_rqst_sz)
 		server->wsize = server_rqst_sz;
 #endif /* CONFIG_NFS_V4_1 */
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.4 048/101] target: Use system workqueue for ALUA transitions

[alexander.levin]

From: Mike Christie <mchristi@redhat.com>

[ Upstream commit 207ee84133c00a8a2a5bdec94df4a5b37d78881c ]

If tcmu-runner is processing a STPG and needs to change the kernel's
ALUA state then we cannot use the same work queue for task management
requests and ALUA transitions, because we could deadlock. The problem
occurs when a STPG times out before tcmu-runner is able to
call into target_tg_pt_gp_alua_access_state_store->
core_alua_do_port_transition -> core_alua_do_transition_tg_pt ->
queue_work. In this case, the tmr is on the work queue waiting for
the STPG to complete, but the STPG transition is now queued behind
the waiting tmr.

Note:
This bug will also be fixed by this patch:
http://www.spinics.net/lists/target-devel/msg14560.html
which switches the tmr code to use the system workqueues.

For both, I am not sure if we need a dedicated workqueue since
it is not a performance path and I do not think we need WQ_MEM_RECLAIM
to make forward progress to free up memory like the block layer does.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/target/target_core_alua.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 49aba4a31747..3dad73448ea5 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -1118,13 +1118,11 @@ static int core_alua_do_transition_tg_pt(
 		unsigned long transition_tmo;
 
 		transition_tmo = tg_pt_gp->tg_pt_gp_implicit_trans_secs * HZ;
-		queue_delayed_work(tg_pt_gp->tg_pt_gp_dev->tmr_wq,
-				   &tg_pt_gp->tg_pt_gp_transition_work,
-				   transition_tmo);
+		schedule_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work,
+				      transition_tmo);
 	} else {
 		tg_pt_gp->tg_pt_gp_transition_complete = &wait;
-		queue_delayed_work(tg_pt_gp->tg_pt_gp_dev->tmr_wq,
-				   &tg_pt_gp->tg_pt_gp_transition_work, 0);
+		schedule_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work, 0);
 		wait_for_completion(&wait);
 		tg_pt_gp->tg_pt_gp_transition_complete = NULL;
 	}
-- 
2.11.0

[PATCH AUTOSEL for 4.4 047/101] btrfs: add missing memset while reading compressed inline extents

[alexander.levin]

From: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>

[ Upstream commit e1699d2d7bf6e6cce3e1baff19f9dd4595a58664 ]

This is a story about 4 distinct (and very old) btrfs bugs.

Commit c8b978188c ("Btrfs: Add zlib compression support") added
three data corruption bugs for inline extents (bugs #1-3).

Commit 93c82d5750 ("Btrfs: zero page past end of inline file items")
fixed bug #1:  uncompressed inline extents followed by a hole and more
extents could get non-zero data in the hole as they were read.  The fix
was to add a memset in btrfs_get_extent to zero out the hole.

Commit 166ae5a418 ("btrfs: fix inline compressed read err corruption")
fixed bug #2:  compressed inline extents which contained non-zero bytes
might be replaced with zero bytes in some cases.  This patch removed an
unhelpful memset from uncompress_inline, but the case where memset is
required was missed.

There is also a memset in the decompression code, but this only covers
decompressed data that is shorter than the ram_bytes from the extent
ref record.  This memset doesn't cover the region between the end of the
decompressed data and the end of the page.  It has also moved around a
few times over the years, so there's no single patch to refer to.

This patch fixes bug #3:  compressed inline extents followed by a hole
and more extents could get non-zero data in the hole as they were read
(i.e. bug #3 is the same as bug #1, but s/uncompressed/compressed/).
The fix is the same:  zero out the hole in the compressed case too,
by putting a memset back in uncompress_inline, but this time with
correct parameters.

The last and oldest bug, bug #0, is the cause of the offending inline
extent/hole/extent pattern.  Bug #0 is a subtle and mostly-harmless quirk
of behavior somewhere in the btrfs write code.  In a few special cases,
an inline extent and hole are allowed to persist where they normally
would be combined with later extents in the file.

A fast reproducer for bug #0 is presented below.  A few offending extents
are also created in the wild during large rsync transfers with the -S
flag.  A Linux kernel build (git checkout; make allyesconfig; make -j8)
will produce a handful of offending files as well.  Once an offending
file is created, it can present different content to userspace each
time it is read.

Bug #0 is at least 4 and possibly 8 years old.  I verified every vX.Y
kernel back to v3.5 has this behavior.  There are fossil records of this
bug's effects in commits all the way back to v2.6.32.  I have no reason
to believe bug #0 wasn't present at the beginning of btrfs compression
support in v2.6.29, but I can't easily test kernels that old to be sure.

It is not clear whether bug #0 is worth fixing.  A fix would likely
require injecting extra reads into currently write-only paths, and most
of the exceptional cases caused by bug #0 are already handled now.

Whether we like them or not, bug #0's inline extents followed by holes
are part of the btrfs de-facto disk format now, and we need to be able
to read them without data corruption or an infoleak.  So enough about
bug #0, let's get back to bug #3 (this patch).

An example of on-disk structure leading to data corruption found in
the wild:

        item 61 key (606890 INODE_ITEM 0) itemoff 9662 itemsize 160
                inode generation 50 transid 50 size 47424 nbytes 49141
                block group 0 mode 100644 links 1 uid 0 gid 0
                rdev 0 flags 0x0(none)
        item 62 key (606890 INODE_REF 603050) itemoff 9642 itemsize 20
                inode ref index 3 namelen 10 name: DB_File.so
        item 63 key (606890 EXTENT_DATA 0) itemoff 8280 itemsize 1362
                inline extent data size 1341 ram 4085 compress(zlib)
        item 64 key (606890 EXTENT_DATA 4096) itemoff 8227 itemsize 53
                extent data disk byte 5367308288 nr 20480
                extent data offset 0 nr 45056 ram 45056
                extent compression(zlib)

Different data appears in userspace during each read of the 11 bytes
between 4085 and 4096.  The extent in item 63 is not long enough to
fill the first page of the file, so a memset is required to fill the
space between item 63 (ending at 4085) and item 64 (beginning at 4096)
with zero.

Here is a reproducer from Liu Bo, which demonstrates another method
of creating the same inline extent and hole pattern:

Using 'page_poison=on' kernel command line (or enable
CONFIG_PAGE_POISONING) run the following:

	# touch foo
	# chattr +c foo
	# xfs_io -f -c "pwrite -W 0 1000" foo
	# xfs_io -f -c "falloc 4 8188" foo
	# od -x foo
	# echo 3 >/proc/sys/vm/drop_caches
	# od -x foo

This produce the following on my box:

Correct output:  file contains 1000 data bytes followed
by zeros:

	0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
	*
	0001740 cdcd cdcd cdcd cdcd 0000 0000 0000 0000
	0001760 0000 0000 0000 0000 0000 0000 0000 0000
	*
	0020000

Actual output:  the data after the first 1000 bytes
will be different each run:

	0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
	*
	0001740 cdcd cdcd cdcd cdcd 6c63 7400 635f 006d
	0001760 5f74 6f43 7400 435f 0053 5f74 7363 7400
	0002000 435f 0056 5f74 6164 7400 645f 0062 5f74
	(...)

Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/btrfs/inode.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index bebd6517355d..af1da85da509 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -6735,6 +6735,20 @@ static noinline int uncompress_inline(struct btrfs_path *path,
 	max_size = min_t(unsigned long, PAGE_CACHE_SIZE, max_size);
 	ret = btrfs_decompress(compress_type, tmp, page,
 			       extent_offset, inline_size, max_size);
+
+	/*
+	 * decompression code contains a memset to fill in any space between the end
+	 * of the uncompressed data and the end of max_size in case the decompressed
+	 * data ends up shorter than ram_bytes.  That doesn't cover the hole between
+	 * the end of an inline extent and the beginning of the next block, so we
+	 * cover that region here.
+	 */
+
+	if (max_size + pg_offset < PAGE_SIZE) {
+		char *map = kmap(page);
+		memset(map + pg_offset + max_size, 0, PAGE_SIZE - max_size - pg_offset);
+		kunmap(page);
+	}
 	kfree(tmp);
 	return ret;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.4 049/101] target: fix ALUA transition timeout handling

[alexander.levin]

From: Mike Christie <mchristi@redhat.com>

[ Upstream commit d7175373f2745ed4abe5b388d5aabd06304f801e ]

The implicit transition time tells initiators the min time
to wait before timing out a transition. We currently schedule
the transition to occur in tg_pt_gp_implicit_trans_secs
seconds so there is no room for delays. If
core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata
needs to write out info to a remote file, then the initiator can
easily time out the operation.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/target/target_core_alua.c | 23 ++++++++---------------
 include/target/target_core_base.h |  2 +-
 2 files changed, 9 insertions(+), 16 deletions(-)

diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 3dad73448ea5..8eec0162acb1 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -1010,7 +1010,7 @@ static void core_alua_queue_state_change_ua(struct t10_alua_tg_pt_gp *tg_pt_gp)
 static void core_alua_do_transition_tg_pt_work(struct work_struct *work)
 {
 	struct t10_alua_tg_pt_gp *tg_pt_gp = container_of(work,
-		struct t10_alua_tg_pt_gp, tg_pt_gp_transition_work.work);
+		struct t10_alua_tg_pt_gp, tg_pt_gp_transition_work);
 	struct se_device *dev = tg_pt_gp->tg_pt_gp_dev;
 	bool explicit = (tg_pt_gp->tg_pt_gp_alua_access_status ==
 			 ALUA_STATUS_ALTERED_BY_EXPLICIT_STPG);
@@ -1073,13 +1073,12 @@ static int core_alua_do_transition_tg_pt(
 	/*
 	 * Flush any pending transitions
 	 */
-	if (!explicit && tg_pt_gp->tg_pt_gp_implicit_trans_secs &&
-	    atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
+	if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
 	    ALUA_ACCESS_STATE_TRANSITION) {
 		/* Just in case */
 		tg_pt_gp->tg_pt_gp_alua_pending_state = new_state;
 		tg_pt_gp->tg_pt_gp_transition_complete = &wait;
-		flush_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work);
+		flush_work(&tg_pt_gp->tg_pt_gp_transition_work);
 		wait_for_completion(&wait);
 		tg_pt_gp->tg_pt_gp_transition_complete = NULL;
 		return 0;
@@ -1114,15 +1113,9 @@ static int core_alua_do_transition_tg_pt(
 	atomic_inc(&tg_pt_gp->tg_pt_gp_ref_cnt);
 	spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
 
-	if (!explicit && tg_pt_gp->tg_pt_gp_implicit_trans_secs) {
-		unsigned long transition_tmo;
-
-		transition_tmo = tg_pt_gp->tg_pt_gp_implicit_trans_secs * HZ;
-		schedule_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work,
-				      transition_tmo);
-	} else {
+	schedule_work(&tg_pt_gp->tg_pt_gp_transition_work);
+	if (explicit) {
 		tg_pt_gp->tg_pt_gp_transition_complete = &wait;
-		schedule_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work, 0);
 		wait_for_completion(&wait);
 		tg_pt_gp->tg_pt_gp_transition_complete = NULL;
 	}
@@ -1690,8 +1683,8 @@ struct t10_alua_tg_pt_gp *core_alua_allocate_tg_pt_gp(struct se_device *dev,
 	mutex_init(&tg_pt_gp->tg_pt_gp_md_mutex);
 	spin_lock_init(&tg_pt_gp->tg_pt_gp_lock);
 	atomic_set(&tg_pt_gp->tg_pt_gp_ref_cnt, 0);
-	INIT_DELAYED_WORK(&tg_pt_gp->tg_pt_gp_transition_work,
-			  core_alua_do_transition_tg_pt_work);
+	INIT_WORK(&tg_pt_gp->tg_pt_gp_transition_work,
+		  core_alua_do_transition_tg_pt_work);
 	tg_pt_gp->tg_pt_gp_dev = dev;
 	atomic_set(&tg_pt_gp->tg_pt_gp_alua_access_state,
 		ALUA_ACCESS_STATE_ACTIVE_OPTIMIZED);
@@ -1799,7 +1792,7 @@ void core_alua_free_tg_pt_gp(
 	dev->t10_alua.alua_tg_pt_gps_counter--;
 	spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
 
-	flush_delayed_work(&tg_pt_gp->tg_pt_gp_transition_work);
+	flush_work(&tg_pt_gp->tg_pt_gp_transition_work);
 
 	/*
 	 * Allow a struct t10_alua_tg_pt_gp_member * referenced by
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 8555321306fb..9982a2bcb880 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -299,7 +299,7 @@ struct t10_alua_tg_pt_gp {
 	struct list_head tg_pt_gp_lun_list;
 	struct se_lun *tg_pt_gp_alua_lun;
 	struct se_node_acl *tg_pt_gp_alua_nacl;
-	struct delayed_work tg_pt_gp_transition_work;
+	struct work_struct tg_pt_gp_transition_work;
 	struct completion *tg_pt_gp_transition_complete;
 };
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 053/101] video: udlfb: Fix read EDID timeout

[alexander.levin]

From: Ladislav Michl <ladis@linux-mips.org>

[ Upstream commit c98769475575c8a585f5b3952f4b5f90266f699b ]

While usb_control_msg function expects timeout in miliseconds, a value
of HZ is used. Replace it with USB_CTRL_GET_TIMEOUT and also fix error
message which looks like:
udlfb: Read EDID byte 78 failed err ffffff92
as error is either negative errno or number of bytes transferred use %d
format specifier.

Returned EDID is in second byte, so return error when less than two bytes
are received.

Fixes: 18dffdf8913a ("staging: udlfb: enhance EDID and mode handling support")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/video/fbdev/udlfb.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
index e9c2f7ba3c8e..53326badfb61 100644
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -769,11 +769,11 @@ static int dlfb_get_edid(struct dlfb_data *dev, char *edid, int len)
 
 	for (i = 0; i < len; i++) {
 		ret = usb_control_msg(dev->udev,
-				    usb_rcvctrlpipe(dev->udev, 0), (0x02),
-				    (0x80 | (0x02 << 5)), i << 8, 0xA1, rbuf, 2,
-				    HZ);
-		if (ret < 1) {
-			pr_err("Read EDID byte %d failed err %x\n", i, ret);
+				      usb_rcvctrlpipe(dev->udev, 0), 0x02,
+				      (0x80 | (0x02 << 5)), i << 8, 0xA1,
+				      rbuf, 2, USB_CTRL_GET_TIMEOUT);
+		if (ret < 2) {
+			pr_err("Read EDID byte %d failed: %d\n", i, ret);
 			i--;
 			break;
 		}
-- 
2.11.0

[PATCH AUTOSEL for 4.4 052/101] fbdev: controlfb: Add missing modes to fix out of bounds access

[alexander.levin]

From: Geert Uytterhoeven <geert@linux-m68k.org>

[ Upstream commit ac831a379d34109451b3c41a44a20ee10ecb615f ]

Dan's static analysis says:

    drivers/video/fbdev/controlfb.c:560 control_setup()
    error: buffer overflow 'control_mac_modes' 20 <= 21

Indeed, control_mac_modes[] has only 20 elements, while VMODE_MAX is 22,
which may lead to an out of bounds read when parsing vmode commandline
options.

The bug was introduced in v2.4.5.6, when 2 new modes were added to
macmodes.h, but control_mac_modes[] wasn't updated:

https://kernel.opensuse.org/cgit/kernel/diff/include/video/macmodes.h?h=v2.5.2&id=29f279c764808560eaceb88fef36cbc35c529aad

Augment control_mac_modes[] with the two new video modes to fix this.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/video/fbdev/controlfb.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/video/fbdev/controlfb.h b/drivers/video/fbdev/controlfb.h
index 6026c60fc100..261522fabdac 100644
--- a/drivers/video/fbdev/controlfb.h
+++ b/drivers/video/fbdev/controlfb.h
@@ -141,5 +141,7 @@ static struct max_cmodes control_mac_modes[] = {
 	{{ 1, 2}},	/* 1152x870, 75Hz */
 	{{ 0, 1}},	/* 1280x960, 75Hz */
 	{{ 0, 1}},	/* 1280x1024, 75Hz */
+	{{ 1, 2}},	/* 1152x768, 60Hz */
+	{{ 0, 1}},	/* 1600x1024, 60Hz */
 };
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 050/101] target: fix race during implicit transition work flushes

[alexander.levin]

From: Mike Christie <mchristi@redhat.com>

[ Upstream commit 760bf578edf8122f2503a3a6a3f4b0de3b6ce0bb ]

This fixes the following races:

1. core_alua_do_transition_tg_pt could have read
tg_pt_gp_alua_access_state and gone into this if chunk:

if (!explicit &&
        atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
           ALUA_ACCESS_STATE_TRANSITION) {

and then core_alua_do_transition_tg_pt_work could update the
state. core_alua_do_transition_tg_pt would then only set
tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would
not get updated with the second calls state.

2. core_alua_do_transition_tg_pt could be setting
tg_pt_gp_transition_complete while the tg_pt_gp_transition_work
is already completing. core_alua_do_transition_tg_pt then waits on the
completion that will never be called.

To handle these issues, we just call flush_work which will return when
core_alua_do_transition_tg_pt_work has completed so there is no need
to do the complete/wait. And, if core_alua_do_transition_tg_pt_work
was running, instead of trying to sneak in the state change, we just
schedule up another core_alua_do_transition_tg_pt_work call.

Note that this does not handle a possible race where there are multiple
threads call core_alua_do_transition_tg_pt at the same time. I think
we need a mutex in target_tg_pt_gp_alua_access_state_store.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/target/target_core_alua.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 8eec0162acb1..1fe782f9ee81 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -1073,16 +1073,8 @@ static int core_alua_do_transition_tg_pt(
 	/*
 	 * Flush any pending transitions
 	 */
-	if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
-	    ALUA_ACCESS_STATE_TRANSITION) {
-		/* Just in case */
-		tg_pt_gp->tg_pt_gp_alua_pending_state = new_state;
-		tg_pt_gp->tg_pt_gp_transition_complete = &wait;
+	if (!explicit)
 		flush_work(&tg_pt_gp->tg_pt_gp_transition_work);
-		wait_for_completion(&wait);
-		tg_pt_gp->tg_pt_gp_transition_complete = NULL;
-		return 0;
-	}
 
 	/*
 	 * Save the old primary ALUA access state, and set the current state
-- 
2.11.0

[PATCH AUTOSEL for 4.4 051/101] sfc: don't warn on successful change of MAC

[alexander.levin]

From: Robert Stonehouse <rstonehouse@solarflare.com>

[ Upstream commit cbad52e92ad7f01f0be4ca58bde59462dc1afe3a ]

Fixes: 535a61777f44e ("sfc: suppress handled MCDI failures when changing the MAC address")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ethernet/sfc/ef10.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index cbe9a330117a..063aca17e698 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -4307,7 +4307,7 @@ static int efx_ef10_set_mac_address(struct efx_nic *efx)
 		 * MCFW do not support VFs.
 		 */
 		rc = efx_ef10_vport_set_mac_address(efx);
-	} else {
+	} else if (rc) {
 		efx_mcdi_display_error(efx, MC_CMD_VADAPTOR_SET_MAC,
 				       sizeof(inbuf), NULL, 0, rc);
 	}
-- 
2.11.0

[PATCH AUTOSEL for 4.4 057/101] ASoC: cs42l56: Fix reset GPIO name in example DT binding

[alexander.levin]

From: "Andrew F. Davis" <afd@ti.com>

[ Upstream commit 8adc430603d67e76a0f8491df21654f691acda62 ]

The binding states the reset GPIO property shall be named
"cirrus,gpio-nreset" and this is what the driver looks for,
but the example uses "gpio-reset". Fix this here.

Fixes: 3bb40619aca8 ("ASoC: cs42l56: bindings: sound: Add bindings for CS42L56 CODEC")

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 Documentation/devicetree/bindings/sound/cs42l56.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/sound/cs42l56.txt b/Documentation/devicetree/bindings/sound/cs42l56.txt
index 4feb0eb27ea4..4ba520a28ae8 100644
--- a/Documentation/devicetree/bindings/sound/cs42l56.txt
+++ b/Documentation/devicetree/bindings/sound/cs42l56.txt
@@ -55,7 +55,7 @@ Example:
 codec: codec@4b {
 	compatible = "cirrus,cs42l56";
 	reg = <0x4b>;
-	gpio-reset = <&gpio 10 0>;
+	cirrus,gpio-nreset = <&gpio 10 0>;
 	cirrus,chgfreq-divisor = <0x05>;
 	cirrus.ain1_ref_cfg;
 	cirrus,micbias-lvl = <5>;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 054/101] video: fbdev: au1200fb: Release some resources if a memory allocation fails

[alexander.levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 451f130602619a17c8883dd0b71b11624faffd51 ]

We should go through the error handling code instead of returning -ENOMEM
directly.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/video/fbdev/au1200fb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/au1200fb.c b/drivers/video/fbdev/au1200fb.c
index f9507b1894df..e5897fce3c03 100644
--- a/drivers/video/fbdev/au1200fb.c
+++ b/drivers/video/fbdev/au1200fb.c
@@ -1699,7 +1699,8 @@ static int au1200fb_drv_probe(struct platform_device *dev)
 		if (!fbdev->fb_mem) {
 			print_err("fail to allocate frambuffer (size: %dK))",
 				  fbdev->fb_len / 1024);
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto failed;
 		}
 
 		/*
-- 
2.11.0

[PATCH AUTOSEL for 4.4 055/101] video: fbdev: au1200fb: Return an error code if a memory allocation fails

[alexander.levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 8cae353e6b01ac3f18097f631cdbceb5ff28c7f3 ]

'ret' is known to be 0 at this point.
In case of memory allocation error in 'framebuffer_alloc()', return
-ENOMEM instead.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/video/fbdev/au1200fb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/au1200fb.c b/drivers/video/fbdev/au1200fb.c
index e5897fce3c03..789d3f16ff9f 100644
--- a/drivers/video/fbdev/au1200fb.c
+++ b/drivers/video/fbdev/au1200fb.c
@@ -1680,8 +1680,10 @@ static int au1200fb_drv_probe(struct platform_device *dev)
 
 		fbi = framebuffer_alloc(sizeof(struct au1200fb_device),
 					&dev->dev);
-		if (!fbi)
+		if (!fbi) {
+			ret = -ENOMEM;
 			goto failed;
+		}
 
 		_au1200fb_infos[plane] = fbi;
 		fbdev = fbi->par;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 056/101] rtc: pcf8563: fix output clock rate

[alexander.levin]

From: Philipp Zabel <p.zabel@pengutronix.de>

[ Upstream commit a3350f9c57ffad569c40f7320b89da1f3061c5bb ]

The pcf8563_clkout_recalc_rate function erroneously ignores the
frequency index read from the CLKO register and always returns
32768 Hz.

Fixes: a39a6405d5f9 ("rtc: pcf8563: add CLKOUT to common clock framework")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/rtc/rtc-pcf8563.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
index c8f95b8e463a..45b5a3d47ccf 100644
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -427,7 +427,7 @@ static unsigned long pcf8563_clkout_recalc_rate(struct clk_hw *hw,
 		return 0;
 
 	buf &= PCF8563_REG_CLKO_F_MASK;
-	return clkout_rates[ret];
+	return clkout_rates[buf];
 }
 
 static long pcf8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
-- 
2.11.0

[PATCH AUTOSEL for 4.4 061/101] netfilter: ipvs: Fix inappropriate output of procfs

[alexander.levin]

From: KUWAZAWA Takuya <albatross0@gmail.com>

[ Upstream commit c5504f724c86ee925e7ffb80aa342cfd57959b13 ]

Information about ipvs in different network namespace can be seen via procfs.

How to reproduce:

  # ip netns add ns01
  # ip netns add ns02
  # ip netns exec ns01 ip a add dev lo 127.0.0.1/8
  # ip netns exec ns02 ip a add dev lo 127.0.0.1/8
  # ip netns exec ns01 ipvsadm -A -t 10.1.1.1:80
  # ip netns exec ns02 ipvsadm -A -t 10.1.1.2:80

The ipvsadm displays information about its own network namespace only.

  # ip netns exec ns01 ipvsadm -Ln
  IP Virtual Server version 1.2.1 (size=4096)
  Prot LocalAddress:Port Scheduler Flags
    -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
  TCP  10.1.1.1:80 wlc

  # ip netns exec ns02 ipvsadm -Ln
  IP Virtual Server version 1.2.1 (size=4096)
  Prot LocalAddress:Port Scheduler Flags
    -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
  TCP  10.1.1.2:80 wlc

But I can see information about other network namespace via procfs.

  # ip netns exec ns01 cat /proc/net/ip_vs
  IP Virtual Server version 1.2.1 (size=4096)
  Prot LocalAddress:Port Scheduler Flags
    -> RemoteAddress:Port Forward Weight ActiveConn InActConn
  TCP  0A010101:0050 wlc
  TCP  0A010102:0050 wlc

  # ip netns exec ns02 cat /proc/net/ip_vs
  IP Virtual Server version 1.2.1 (size=4096)
  Prot LocalAddress:Port Scheduler Flags
    -> RemoteAddress:Port Forward Weight ActiveConn InActConn
  TCP  0A010102:0050 wlc

Signed-off-by: KUWAZAWA Takuya <albatross0@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/netfilter/ipvs/ip_vs_ctl.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index e7c1b052c2a3..2c937c16dc27 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -1999,12 +1999,16 @@ static int ip_vs_info_seq_show(struct seq_file *seq, void *v)
 		seq_puts(seq,
 			 "  -> RemoteAddress:Port Forward Weight ActiveConn InActConn\n");
 	} else {
+		struct net *net = seq_file_net(seq);
+		struct netns_ipvs *ipvs = net_ipvs(net);
 		const struct ip_vs_service *svc = v;
 		const struct ip_vs_iter *iter = seq->private;
 		const struct ip_vs_dest *dest;
 		struct ip_vs_scheduler *sched = rcu_dereference(svc->scheduler);
 		char *sched_name = sched ? sched->name : "none";
 
+		if (svc->ipvs != ipvs)
+			return 0;
 		if (iter->table == ip_vs_svc_table) {
 #ifdef CONFIG_IP_VS_IPV6
 			if (svc->af == AF_INET6)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 059/101] PCI/PME: Handle invalid data when reading Root Status

[alexander.levin]

From: Qiang <zhengqiang10@huawei.com>

[ Upstream commit 3ad3f8ce50914288731a3018b27ee44ab803e170 ]

PCIe PME and native hotplug share the same interrupt number, so hotplug
interrupts are also processed by PME.  In some cases, e.g., a Link Down
interrupt, a device may be present but unreachable, so when we try to
read its Root Status register, the read fails and we get all ones data
(0xffffffff).

Previously, we interpreted that data as PCI_EXP_RTSTA_PME being set, i.e.,
"some device has asserted PME," so we scheduled pcie_pme_work_fn().  This
caused an infinite loop because pcie_pme_work_fn() tried to handle PME
requests until PCI_EXP_RTSTA_PME is cleared, but with the link down,
PCI_EXP_RTSTA_PME can't be cleared.

Check for the invalid 0xffffffff data everywhere we read the Root Status
register.

1469d17dd341 ("PCI: pciehp: Handle invalid data when reading from
non-existent devices") added similar checks in the hotplug driver.

Signed-off-by: Qiang Zheng <zhengqiang10@huawei.com>
[bhelgaas: changelog, also check in pcie_pme_work_fn(), use "~0" to follow
other similar checks]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/pci/pcie/pme.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 63fc63911295..deb903112974 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -233,6 +233,9 @@ static void pcie_pme_work_fn(struct work_struct *work)
 			break;
 
 		pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
+		if (rtsta == (u32) ~0)
+			break;
+
 		if (rtsta & PCI_EXP_RTSTA_PME) {
 			/*
 			 * Clear PME status of the port.  If there are other
@@ -280,7 +283,7 @@ static irqreturn_t pcie_pme_irq(int irq, void *context)
 	spin_lock_irqsave(&data->lock, flags);
 	pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
 
-	if (!(rtsta & PCI_EXP_RTSTA_PME)) {
+	if (rtsta == (u32) ~0 || !(rtsta & PCI_EXP_RTSTA_PME)) {
 		spin_unlock_irqrestore(&data->lock, flags);
 		return IRQ_NONE;
 	}
-- 
2.11.0

[PATCH AUTOSEL for 4.4 058/101] dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type

[alexander.levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 288e7560e4d3e259aa28f8f58a8dfe63627a1bf6 ]

The used 0x1f mask is only valid for am335x family of SoC, different family
using this type of crossbar might have different number of electable
events. In case of am43xx family 0x3f mask should have been used for
example.
Instead of trying to handle each family's mask, just use u8 type to store
the mux value since the event offsets are aligned to byte offset.

Fixes: 42dbdcc6bf965 ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/dma/ti-dma-crossbar.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/ti-dma-crossbar.c b/drivers/dma/ti-dma-crossbar.c
index 149ec2bd9bc6..8100ede095d5 100644
--- a/drivers/dma/ti-dma-crossbar.c
+++ b/drivers/dma/ti-dma-crossbar.c
@@ -46,12 +46,12 @@ struct ti_am335x_xbar_data {
 
 struct ti_am335x_xbar_map {
 	u16 dma_line;
-	u16 mux_val;
+	u8 mux_val;
 };
 
-static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u16 val)
+static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u8 val)
 {
-	writeb_relaxed(val & 0x1f, iomem + event);
+	writeb_relaxed(val, iomem + event);
 }
 
 static void ti_am335x_xbar_free(struct device *dev, void *route_data)
@@ -102,7 +102,7 @@ static void *ti_am335x_xbar_route_allocate(struct of_phandle_args *dma_spec,
 	}
 
 	map->dma_line = (u16)dma_spec->args[0];
-	map->mux_val = (u16)dma_spec->args[2];
+	map->mux_val = (u8)dma_spec->args[2];
 
 	dma_spec->args[2] = 0;
 	dma_spec->args_count = 2;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 060/101] powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo

[alexander.levin]

From: Shriya <shriyak@linux.vnet.ibm.com>

[ Upstream commit cd77b5ce208c153260ed7882d8910f2395bfaabd ]

The call to /proc/cpuinfo in turn calls cpufreq_quick_get() which
returns the last frequency requested by the kernel, but may not
reflect the actual frequency the processor is running at. This patch
makes a call to cpufreq_get() instead which returns the current
frequency reported by the hardware.

Fixes: fb5153d05a7d ("powerpc: powernv: Implement ppc_md.get_proc_freq()")
Signed-off-by: Shriya <shriyak@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/powerpc/platforms/powernv/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index a9a8fa37a555..f48afc06ba14 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -295,7 +295,7 @@ static unsigned long pnv_get_proc_freq(unsigned int cpu)
 {
 	unsigned long ret_freq;
 
-	ret_freq = cpufreq_quick_get(cpu) * 1000ul;
+	ret_freq = cpufreq_get(cpu) * 1000ul;
 
 	/*
 	 * If the backend cpufreq driver does not exist,
-- 
2.11.0

[PATCH AUTOSEL for 4.4 063/101] powerpc/ipic: Fix status get and status clear

[alexander.levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 6b148a7ce72a7f87c81cbcde48af014abc0516a9 ]

IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR
which is the mask register.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/powerpc/sysdev/ipic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index f76ee39cb337..800a591695c0 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -845,12 +845,12 @@ void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq)
 
 u32 ipic_get_mcp_status(void)
 {
-	return ipic_read(primary_ipic->regs, IPIC_SERMR);
+	return ipic_read(primary_ipic->regs, IPIC_SERSR);
 }
 
 void ipic_clear_mcp_status(u32 mask)
 {
-	ipic_write(primary_ipic->regs, IPIC_SERMR, mask);
+	ipic_write(primary_ipic->regs, IPIC_SERSR, mask);
 }
 
 /* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-- 
2.11.0

[PATCH AUTOSEL for 4.4 064/101] platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()

[alexander.levin]

From: Markus Elfring <elfring@users.sourceforge.net>

[ Upstream commit f6c8a317ab208aee223776327c06f23342492d54 ]

Source code review for a specific software refactoring showed the need
for another correction because the error code "-1" was returned so far
if a call of the function "sony_call_snc_handle" failed here.
Thus assign the return value from these two function calls also to
the variable "err" and provide it in case of a failure.

Fixes: d6f15ed876b83a1a0eba1d0473eef58acc95444a ("sony-laptop: use soft rfkill status stored in hw")
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lkml.org/lkml/2017/10/31/463
Link: https://lkml.kernel.org/r/<CAHp75VcMkXCioCzmLE0+BTmkqc5RSOx9yPO0ectVHMrMvewgwg@mail.gmail.com>
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/platform/x86/sony-laptop.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index f73c29558cd3..1e12cd55a4a9 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1655,17 +1655,19 @@ static int sony_nc_setup_rfkill(struct acpi_device *device,
 	if (!rfk)
 		return -ENOMEM;
 
-	if (sony_call_snc_handle(sony_rfkill_handle, 0x200, &result) < 0) {
+	err = sony_call_snc_handle(sony_rfkill_handle, 0x200, &result);
+	if (err < 0) {
 		rfkill_destroy(rfk);
-		return -1;
+		return err;
 	}
 	hwblock = !(result & 0x1);
 
-	if (sony_call_snc_handle(sony_rfkill_handle,
-				sony_rfkill_address[nc_type],
-				&result) < 0) {
+	err = sony_call_snc_handle(sony_rfkill_handle,
+				   sony_rfkill_address[nc_type],
+				   &result);
+	if (err < 0) {
 		rfkill_destroy(rfk);
-		return -1;
+		return err;
 	}
 	swblock = !(result & 0x2);
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 062/101] powerpc/opal: Fix EBUSY bug in acquiring tokens

[alexander.levin]

From: "William A. Kennington III" <wak@google.com>

[ Upstream commit 71e24d7731a2903b1ae2bba2b2971c654d9c2aa6 ]

The current code checks the completion map to look for the first token
that is complete. In some cases, a completion can come in but the
token can still be on lease to the caller processing the completion.
If this completed but unreleased token is the first token found in the
bitmap by another tasks trying to acquire a token, then the
__test_and_set_bit call will fail since the token will still be on
lease. The acquisition will then fail with an EBUSY.

This patch reorganizes the acquisition code to look at the
opal_async_token_map for an unleased token. If the token has no lease
it must have no outstanding completions so we should never see an
EBUSY, unless we have leased out too many tokens. Since
opal_async_get_token_inrerruptible is protected by a semaphore, we
will practically never see EBUSY anymore.

Fixes: 8d7248232208 ("powerpc/powernv: Infrastructure to support OPAL async completion")
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/powerpc/platforms/powernv/opal-async.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/opal-async.c b/arch/powerpc/platforms/powernv/opal-async.c
index bdc8c0c71d15..4c00b37b09bc 100644
--- a/arch/powerpc/platforms/powernv/opal-async.c
+++ b/arch/powerpc/platforms/powernv/opal-async.c
@@ -39,18 +39,18 @@ int __opal_async_get_token(void)
 	int token;
 
 	spin_lock_irqsave(&opal_async_comp_lock, flags);
-	token = find_first_bit(opal_async_complete_map, opal_max_async_tokens);
+	token = find_first_zero_bit(opal_async_token_map, opal_max_async_tokens);
 	if (token >= opal_max_async_tokens) {
 		token = -EBUSY;
 		goto out;
 	}
 
-	if (__test_and_set_bit(token, opal_async_token_map)) {
+	if (!__test_and_clear_bit(token, opal_async_complete_map)) {
 		token = -EBUSY;
 		goto out;
 	}
 
-	__clear_bit(token, opal_async_complete_map);
+	__set_bit(token, opal_async_token_map);
 
 out:
 	spin_unlock_irqrestore(&opal_async_comp_lock, flags);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 065/101] target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()

[alexander.levin]

From: Bart Van Assche <bart.vanassche@wdc.com>

[ Upstream commit cfe2b621bb18d86e93271febf8c6e37622da2d14 ]

Avoid that cmd->se_cmd.se_tfo is read after a command has already been
freed.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/target/iscsi/iscsi_target.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index bb73401f5761..8a4092cd97ee 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -674,6 +674,7 @@ static int iscsit_add_reject_from_cmd(
 	unsigned char *buf)
 {
 	struct iscsi_conn *conn;
+	const bool do_put = cmd->se_cmd.se_tfo != NULL;
 
 	if (!cmd->conn) {
 		pr_err("cmd->conn is NULL for ITT: 0x%08x\n",
@@ -704,7 +705,7 @@ static int iscsit_add_reject_from_cmd(
 	 * Perform the kref_put now if se_cmd has already been setup by
 	 * scsit_setup_scsi_cmd()
 	 */
-	if (cmd->se_cmd.se_tfo != NULL) {
+	if (do_put) {
 		pr_debug("iscsi reject: calling target_put_sess_cmd >>>>>>\n");
 		target_put_sess_cmd(&cmd->se_cmd);
 	}
-- 
2.11.0

[PATCH AUTOSEL for 4.4 068/101] target/file: Do not return error for UNMAP if length is zero

[alexander.levin]

From: Jiang Yi <jiangyilism@gmail.com>

[ Upstream commit 594e25e73440863981032d76c9b1e33409ceff6e ]

The function fd_execute_unmap() in target_core_file.c calles

ret = file->f_op->fallocate(file, mode, pos, len);

Some filesystems implement fallocate() to return error if
length is zero (e.g. btrfs) but according to SCSI Block
Commands spec UNMAP should return success for zero length.

Signed-off-by: Jiang Yi <jiangyilism@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/target/target_core_file.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c
index 041a56987845..2e35db7f4aac 100644
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -466,6 +466,10 @@ fd_execute_unmap(struct se_cmd *cmd, sector_t lba, sector_t nolb)
 	struct inode *inode = file->f_mapping->host;
 	int ret;
 
+	if (!nolb) {
+		return 0;
+	}
+
 	if (cmd->se_dev->dev_attrib.pi_prot_type) {
 		ret = fd_do_prot_unmap(cmd, lba, nolb);
 		if (ret)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 069/101] arm-ccn: perf: Prevent module unload while PMU is in use

[alexander.levin]

From: Suzuki K Poulose <suzuki.poulose@arm.com>

[ Upstream commit c7f5828bf77dcbd61d51f4736c1d5aa35663fbb4 ]

When the PMU driver is built as a module, the perf expects the
pmu->module to be valid, so that the driver is prevented from
being unloaded while it is in use. Fix the CCN pmu driver to
fill in this field.

Fixes: a33b0daab73a0 ("bus: ARM CCN PMU driver")
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/bus/arm-ccn.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index 0f54cb7ddcbb..e764e8ebb86b 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -1260,6 +1260,7 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
 
 	/* Perf driver registration */
 	ccn->dt.pmu = (struct pmu) {
+		.module = THIS_MODULE,
 		.attr_groups = arm_ccn_pmu_attr_groups,
 		.task_ctx_nr = perf_invalid_context,
 		.event_init = arm_ccn_pmu_event_init,
-- 
2.11.0

[PATCH AUTOSEL for 4.4 066/101] iscsi-target: fix memory leak in lio_target_tiqn_addtpg()

[alexander.levin]

From: tangwenji <tang.wenji@zte.com.cn>

[ Upstream commit 12d5a43b2dffb6cd28062b4e19024f7982393288 ]

tpg must free when call core_tpg_register() return fail

Signed-off-by: tangwenji <tang.wenji@zte.com.cn>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/target/iscsi/iscsi_target_configfs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
index 634ad3662ed6..8c49bc3dcc8c 100644
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -1210,7 +1210,7 @@ static struct se_portal_group *lio_target_tiqn_addtpg(
 
 	ret = core_tpg_register(wwn, &tpg->tpg_se_tpg, SCSI_PROTOCOL_ISCSI);
 	if (ret < 0)
-		return NULL;
+		goto free_out;
 
 	ret = iscsit_tpg_add_portal_group(tiqn, tpg);
 	if (ret != 0)
@@ -1222,6 +1222,7 @@ static struct se_portal_group *lio_target_tiqn_addtpg(
 	return &tpg->tpg_se_tpg;
 out:
 	core_tpg_deregister(&tpg->tpg_se_tpg);
+free_out:
 	kfree(tpg);
 	return NULL;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.4 067/101] target:fix condition return in core_pr_dump_initiator_port()

[alexander.levin]

From: tangwenji <tang.wenji@zte.com.cn>

[ Upstream commit 24528f089d0a444070aa4f715ace537e8d6bf168 ]

When is pr_reg->isid_present_at_reg is false,this function should return.

This fixes a regression originally introduced by:

  commit d2843c173ee53cf4c12e7dfedc069a5bc76f0ac5
  Author: Andy Grover <agrover@redhat.com>
  Date:   Thu May 16 10:40:55 2013 -0700

      target: Alter core_pr_dump_initiator_port for ease of use

Signed-off-by: tangwenji <tang.wenji@zte.com.cn>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/target/target_core_pr.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index e7933115087a..e38b4582d43e 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -56,8 +56,10 @@ void core_pr_dump_initiator_port(
 	char *buf,
 	u32 size)
 {
-	if (!pr_reg->isid_present_at_reg)
+	if (!pr_reg->isid_present_at_reg) {
 		buf[0] = '\0';
+		return;
+	}
 
 	snprintf(buf, size, ",i,0x%s", pr_reg->pr_reg_isid);
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.4 071/101] mm: Handle 0 flags in _calc_vm_trans() macro

[alexander.levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 592e254502041f953e84d091eae2c68cba04c10b ]

_calc_vm_trans() does not handle the situation when some of the passed
flags are 0 (which can happen if these VM flags do not make sense for
the architecture). Improve the _calc_vm_trans() macro to return 0 in
such situation. Since all passed flags are constant, this does not add
any runtime overhead.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 include/linux/mman.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/linux/mman.h b/include/linux/mman.h
index 16373c8f5f57..369bc3405a6d 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -63,8 +63,9 @@ static inline int arch_validate_prot(unsigned long prot)
  * ("bit1" and "bit2" must be single bits)
  */
 #define _calc_vm_trans(x, bit1, bit2) \
+  ((!(bit1) || !(bit2)) ? 0 : \
   ((bit1) <= (bit2) ? ((x) & (bit1)) * ((bit2) / (bit1)) \
-   : ((x) & (bit1)) / ((bit1) / (bit2)))
+   : ((x) & (bit1)) / ((bit1) / (bit2))))
 
 /*
  * Combine the mmap "prot" argument into "vm_flags" used internally.
-- 
2.11.0

[PATCH AUTOSEL for 4.4 072/101] clk: mediatek: add the option for determining PLL source clock

[alexander.levin]

From: Chen Zhong <chen.zhong@mediatek.com>

[ Upstream commit c955bf3998efa3355790a4d8c82874582f1bc727 ]

Since the previous setup always sets the PLL using crystal 26MHz, this
doesn't always happen in every MediaTek platform. So the patch added
flexibility for assigning extra member for determining the PLL source
clock.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/clk/mediatek/clk-mtk.h | 1 +
 drivers/clk/mediatek/clk-pll.c | 5 ++++-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index 32d2e455eb3f..8e501c219946 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -174,6 +174,7 @@ struct mtk_pll_data {
 	uint32_t pcw_reg;
 	int pcw_shift;
 	const struct mtk_pll_div_table *div_table;
+	const char *parent_name;
 };
 
 void mtk_clk_register_plls(struct device_node *node,
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index 966cab1348da..1c5b081ad5a1 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -302,7 +302,10 @@ static struct clk *mtk_clk_register_pll(const struct mtk_pll_data *data,
 
 	init.name = data->name;
 	init.ops = &mtk_pll_ops;
-	init.parent_names = &parent_name;
+	if (data->parent_name)
+		init.parent_names = &data->parent_name;
+	else
+		init.parent_names = &parent_name;
 	init.num_parents = 1;
 
 	clk = clk_register(NULL, &pll->hw);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 073/101] clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU

[alexander.levin]

From: Sébastien Szymanski <sebastien.szymanski@armadeus.com>

[ Upstream commit c68ee58d9ee7b856ac722f18f4f26579c8fbd2b4 ]

On i.MX6 SoCs without VPU (in my case MCIMX6D4AVT10AC), the hdmi driver
fails to probe:

[    2.540030] dwhdmi-imx 120000.hdmi: Unsupported HDMI controller
(0000:00:00)
[    2.548199] imx-drm display-subsystem: failed to bind 120000.hdmi
(ops dw_hdmi_imx_ops): -19
[    2.557403] imx-drm display-subsystem: master bind failed: -19

That's because hdmi_isfr's parent, video_27m, is not correctly ungated.
As explained in commit 5ccc248cc537 ("ARM: imx6q: clk: Add support for
mipi_core_cfg clock as a shared clock gate"), video_27m is gated by
CCM_CCGR3[CG8].

On i.MX6 SoCs with VPU, the hdmi is working thanks to the
CCM_CMEOR[mod_en_ov_vpu] bit which makes the video_27m ungated whatever
is in CCM_CCGR3[CG8]. The issue can be reproduced by setting
CCMEOR[mod_en_ov_vpu] to 0.

Make the HDMI work in every case by setting hdmi_isfr's parent to
mipi_core_cfg.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/clk/imx/clk-imx6q.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index aab64205d866..a0df83e6b84b 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -419,7 +419,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
 	clk[IMX6QDL_CLK_GPU3D_CORE]   = imx_clk_gate2("gpu3d_core",    "gpu3d_core_podf",   base + 0x6c, 26);
 	clk[IMX6QDL_CLK_HDMI_IAHB]    = imx_clk_gate2("hdmi_iahb",     "ahb",               base + 0x70, 0);
-	clk[IMX6QDL_CLK_HDMI_ISFR]    = imx_clk_gate2("hdmi_isfr",     "video_27m",         base + 0x70, 4);
+	clk[IMX6QDL_CLK_HDMI_ISFR]    = imx_clk_gate2("hdmi_isfr",     "mipi_core_cfg",     base + 0x70, 4);
 	clk[IMX6QDL_CLK_I2C1]         = imx_clk_gate2("i2c1",          "ipg_per",           base + 0x70, 6);
 	clk[IMX6QDL_CLK_I2C2]         = imx_clk_gate2("i2c2",          "ipg_per",           base + 0x70, 8);
 	clk[IMX6QDL_CLK_I2C3]         = imx_clk_gate2("i2c3",          "ipg_per",           base + 0x70, 10);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 070/101] crypto: tcrypt - fix buffer lengths in test_aead_speed()

[alexander.levin]

From: Robert Baronescu <robert.baronescu@nxp.com>

[ Upstream commit 7aacbfcb331ceff3ac43096d563a1f93ed46e35e ]

Fix the way the length of the buffers used for
encryption / decryption are computed.
For e.g. in case of encryption, input buffer does not contain
an authentication tag.

Signed-off-by: Robert Baronescu <robert.baronescu@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 crypto/tcrypt.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index 46a4a757d478..f522828d45c9 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -410,7 +410,7 @@ static void test_aead_speed(const char *algo, int enc, unsigned int secs,
 			}
 
 			sg_init_aead(sg, xbuf,
-				    *b_size + (enc ? authsize : 0));
+				    *b_size + (enc ? 0 : authsize));
 
 			sg_init_aead(sgout, xoutbuf,
 				    *b_size + (enc ? authsize : 0));
@@ -418,7 +418,9 @@ static void test_aead_speed(const char *algo, int enc, unsigned int secs,
 			sg_set_buf(&sg[0], assoc, aad_size);
 			sg_set_buf(&sgout[0], assoc, aad_size);
 
-			aead_request_set_crypt(req, sg, sgout, *b_size, iv);
+			aead_request_set_crypt(req, sg, sgout,
+					       *b_size + (enc ? 0 : authsize),
+					       iv);
 			aead_request_set_ad(req, aad_size);
 
 			if (secs)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 075/101] ppp: Destroy the mutex when cleanup

[alexander.levin]

From: Gao Feng <gfree.wind@vip.163.com>

[ Upstream commit f02b2320b27c16b644691267ee3b5c110846f49e ]

The mutex_destroy only makes sense when enable DEBUG_MUTEX. For the
good readbility, it's better to invoke it in exit func when the init
func invokes mutex_init.

Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/ppp/ppp_generic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index dc454138d600..e2decf71c6d1 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -942,6 +942,7 @@ static __net_exit void ppp_exit_net(struct net *net)
 	unregister_netdevice_many(&list);
 	rtnl_unlock();
 
+	mutex_destroy(&pn->all_ppp_mutex);
 	idr_destroy(&pn->units_idr);
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 076/101] thermal/drivers/step_wise: Fix temperature regulation misbehavior

[alexander.levin]

From: Daniel Lezcano <daniel.lezcano@linaro.org>

[ Upstream commit 07209fcf33542c1ff1e29df2dbdf8f29cdaacb10 ]

There is a particular situation when the cooling device is cpufreq and the heat
dissipation is not efficient enough where the temperature increases little by
little until reaching the critical threshold and leading to a SoC reset.

The behavior is reproducible on a hikey6220 with bad heat dissipation (eg.
stacked with other boards).

Running a simple C program doing while(1); for each CPU of the SoC makes the
temperature to reach the passive regulation trip point and ends up to the
maximum allowed temperature followed by a reset.

This issue has been also reported by running the libhugetlbfs test suite.

What is observed is a ping pong between two cpu frequencies, 1.2GHz and 900MHz
while the temperature continues to grow.

It appears the step wise governor calls get_target_state() the first time with
the throttle set to true and the trend to 'raising'. The code selects logically
the next state, so the cpu frequency decreases from 1.2GHz to 900MHz, so far so
good. The temperature decreases immediately but still stays greater than the
trip point, then get_target_state() is called again, this time with the
throttle set to true *and* the trend to 'dropping'. From there the algorithm
assumes we have to step down the state and the cpu frequency jumps back to
1.2GHz. But the temperature is still higher than the trip point, so
get_target_state() is called with throttle=1 and trend='raising' again, we jump
to 900MHz, then get_target_state() is called with throttle=1 and
trend='dropping', we jump to 1.2GHz, etc ... but the temperature does not
stabilizes and continues to increase.

[  237.922654] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[  237.922678] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[  237.922690] thermal cooling_device0: cur_state=0
[  237.922701] thermal cooling_device0: old_target=0, target=1
[  238.026656] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[  238.026680] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1
[  238.026694] thermal cooling_device0: cur_state=1
[  238.026707] thermal cooling_device0: old_target=1, target=0
[  238.134647] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[  238.134667] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[  238.134679] thermal cooling_device0: cur_state=0
[  238.134690] thermal cooling_device0: old_target=0, target=1

In this situation the temperature continues to increase while the trend is
oscillating between 'dropping' and 'raising'. We need to keep the current state
untouched if the throttle is set, so the temperature can decrease or a higher
state could be selected, thus preventing this oscillation.

Keeping the next_target untouched when 'throttle' is true at 'dropping' time
fixes the issue.

The following traces show the governor does not change the next state if
trend==2 (dropping) and throttle==1.

[ 2306.127987] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 2306.128009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[ 2306.128021] thermal cooling_device0: cur_state=0
[ 2306.128031] thermal cooling_device0: old_target=0, target=1
[ 2306.231991] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 2306.232016] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1
[ 2306.232030] thermal cooling_device0: cur_state=1
[ 2306.232042] thermal cooling_device0: old_target=1, target=1
[ 2306.335982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1
[ 2306.336006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=1
[ 2306.336021] thermal cooling_device0: cur_state=1
[ 2306.336034] thermal cooling_device0: old_target=1, target=1
[ 2306.439984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 2306.440008] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0
[ 2306.440022] thermal cooling_device0: cur_state=1
[ 2306.440034] thermal cooling_device0: old_target=1, target=0

[ ... ]

After a while, if the temperature continues to increase, the next state becomes
2 which is 720MHz on the hikey. That results in the temperature stabilizing
around the trip point.

[ 2455.831982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 2455.832006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=0
[ 2455.832019] thermal cooling_device0: cur_state=1
[ 2455.832032] thermal cooling_device0: old_target=1, target=1
[ 2455.935985] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1
[ 2455.936013] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0
[ 2455.936027] thermal cooling_device0: cur_state=1
[ 2455.936040] thermal cooling_device0: old_target=1, target=1
[ 2456.043984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1
[ 2456.044009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0
[ 2456.044023] thermal cooling_device0: cur_state=1
[ 2456.044036] thermal cooling_device0: old_target=1, target=1
[ 2456.148001] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 2456.148028] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[ 2456.148042] thermal cooling_device0: cur_state=1
[ 2456.148055] thermal cooling_device0: old_target=1, target=2
[ 2456.252009] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 2456.252041] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0
[ 2456.252058] thermal cooling_device0: cur_state=2
[ 2456.252075] thermal cooling_device0: old_target=2, target=1

IOW, this change is needed to keep the state for a cooling device if the
temperature trend is oscillating while the temperature increases slightly.

Without this change, the situation above leads to a catastrophic crash by a
hardware reset on hikey. This issue has been reported to happen on an OMAP
dra7xx also.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/thermal/step_wise.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
index ea9366ad3e6b..7814d18e8940 100644
--- a/drivers/thermal/step_wise.c
+++ b/drivers/thermal/step_wise.c
@@ -31,8 +31,7 @@
  * If the temperature is higher than a trip point,
  *    a. if the trend is THERMAL_TREND_RAISING, use higher cooling
  *       state for this trip point
- *    b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
- *       state for this trip point
+ *    b. if the trend is THERMAL_TREND_DROPPING, do nothing
  *    c. if the trend is THERMAL_TREND_RAISE_FULL, use upper limit
  *       for this trip point
  *    d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit
@@ -94,9 +93,11 @@ static unsigned long get_target_state(struct thermal_instance *instance,
 			if (!throttle)
 				next_target = THERMAL_NO_TARGET;
 		} else {
-			next_target = cur_state - 1;
-			if (next_target > instance->upper)
-				next_target = instance->upper;
+			if (!throttle) {
+				next_target = cur_state - 1;
+				if (next_target > instance->upper)
+					next_target = instance->upper;
+			}
 		}
 		break;
 	case THERMAL_TREND_DROP_FULL:
-- 
2.11.0

[PATCH AUTOSEL for 4.4 074/101] clk: tegra: Fix cclk_lp divisor register

[alexander.levin]

From: Michał Mirosław <mirq-linux@rere.qmqm.pl>

[ Upstream commit 54eff2264d3e9fd7e3987de1d7eba1d3581c631e ]

According to comments in code and common sense, cclk_lp uses its
own divisor, not cclk_g's.

Fixes: b08e8c0ecc42 ("clk: tegra: add clock support for Tegra30")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/clk/tegra/clk-tegra30.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index b90db615c29e..8c41c6fcb9ee 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1063,7 +1063,7 @@ static void __init tegra30_super_clk_init(void)
 	 * U71 divider of cclk_lp.
 	 */
 	clk = tegra_clk_register_divider("pll_p_out3_cclklp", "pll_p_out3",
-				clk_base + SUPER_CCLKG_DIVIDER, 0,
+				clk_base + SUPER_CCLKLP_DIVIDER, 0,
 				TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
 	clk_register_clkdev(clk, "pll_p_out3_cclklp", NULL);
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 077/101] GFS2: Take inode off order_write list when setting jdata flag

[alexander.levin]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit cc555b09d8c3817aeebda43a14ab67049a5653f7 ]

This patch fixes a deadlock caused when the jdata flag is set for
inodes that are already on the ordered write list. Since it is
on the ordered write list, log_flush calls gfs2_ordered_write which
calls filemap_fdatawrite. But since the inode had the jdata flag
set, that calls gfs2_jdata_writepages, which tries to start a new
transaction. A new transaction cannot be started because it tries
to acquire the log_flush rwsem which is already locked by the log
flush operation.

The bottom line is: We cannot switch an inode from ordered to jdata
until we eliminate any ordered data pages (via log flush) or any
log_flush operation afterward will create the circular dependency
above. So we need to flush the log before setting the diskflags to
switch the file mode, then we need to remove the inode from the
ordered writes list.

Before this patch, the log flush was done for jdata->ordered, but
that's wrong. If we're going from jdata to ordered, we don't need
to call gfs2_log_flush because the call to filemap_fdatawrite will
do it for us:

   filemap_fdatawrite() -> __filemap_fdatawrite_range()
      __filemap_fdatawrite_range() -> do_writepages()
         do_writepages() -> gfs2_jdata_writepages()
            gfs2_jdata_writepages() -> gfs2_log_flush()

This patch modifies function do_gfs2_set_flags so that if a file
has its jdata flag set, and it's already on the ordered write list,
the log will be flushed and it will be removed from the list
before setting the flag.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/gfs2/file.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index 5e425469f0c2..1543aa1b2a93 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -255,7 +255,7 @@ static int do_gfs2_set_flags(struct file *filp, u32 reqflags, u32 mask)
 			goto out;
 	}
 	if ((flags ^ new_flags) & GFS2_DIF_JDATA) {
-		if (flags & GFS2_DIF_JDATA)
+		if (new_flags & GFS2_DIF_JDATA)
 			gfs2_log_flush(sdp, ip->i_gl, NORMAL_FLUSH);
 		error = filemap_fdatawrite(inode->i_mapping);
 		if (error)
@@ -263,6 +263,8 @@ static int do_gfs2_set_flags(struct file *filp, u32 reqflags, u32 mask)
 		error = filemap_fdatawait(inode->i_mapping);
 		if (error)
 			goto out;
+		if (new_flags & GFS2_DIF_JDATA)
+			gfs2_ordered_del_inode(ip);
 	}
 	error = gfs2_trans_begin(sdp, RES_DINODE, 0);
 	if (error)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 081/101] xfs: fix log block underflow during recovery cycle verification

[alexander.levin]

From: Brian Foster <bfoster@redhat.com>

[ Upstream commit 9f2a4505800607e537e9dd9dea4f55c4b0c30c7a ]

It is possible for mkfs to format very small filesystems with too
small of an internal log with respect to the various minimum size
and block count requirements. If this occurs when the log happens to
be smaller than the scan window used for cycle verification and the
scan wraps the end of the log, the start_blk calculation in
xlog_find_head() underflows and leads to an attempt to scan an
invalid range of log blocks. This results in log recovery failure
and a failed mount.

Since there may be filesystems out in the wild with this kind of
geometry, we cannot simply refuse to mount. Instead, cap the scan
window for cycle verification to the size of the physical log. This
ensures that the cycle verification proceeds as expected when the
scan wraps the end of the log.

Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/xfs/xfs_log_recover.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 8cab78eeb0c2..b34d1685936d 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -738,7 +738,7 @@ xlog_find_head(
 	 * in the in-core log.  The following number can be made tighter if
 	 * we actually look at the block size of the filesystem.
 	 */
-	num_scan_bblks = XLOG_TOTAL_REC_SHIFT(log);
+	num_scan_bblks = min_t(int, log_bbnum, XLOG_TOTAL_REC_SHIFT(log));
 	if (head_blk >= num_scan_bblks) {
 		/*
 		 * We are guaranteed that the entire check can be performed
-- 
2.11.0

[PATCH AUTOSEL for 4.4 078/101] bcache: explicitly destroy mutex while exiting

[alexander.levin]

From: Liang Chen <liangchen.linux@gmail.com>

[ Upstream commit 330a4db89d39a6b43f36da16824eaa7a7509d34d ]

mutex_destroy does nothing most of time, but it's better to call
it to make the code future proof and it also has some meaning
for like mutex debug.

As Coly pointed out in a previous review, bcache_exit() may not be
able to handle all the references properly if userspace registers
cache and backing devices right before bch_debug_init runs and
bch_debug_init failes later. So not exposing userspace interface
until everything is ready to avoid that issue.

Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/md/bcache/super.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index c5ceea9222ff..8eaadd9869bc 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -2083,6 +2083,7 @@ static void bcache_exit(void)
 	if (bcache_major)
 		unregister_blkdev(bcache_major, "bcache");
 	unregister_reboot_notifier(&reboot);
+	mutex_destroy(&bch_register_lock);
 }
 
 static int __init bcache_init(void)
@@ -2101,14 +2102,15 @@ static int __init bcache_init(void)
 	bcache_major = register_blkdev(0, "bcache");
 	if (bcache_major < 0) {
 		unregister_reboot_notifier(&reboot);
+		mutex_destroy(&bch_register_lock);
 		return bcache_major;
 	}
 
 	if (!(bcache_wq = create_workqueue("bcache")) ||
 	    !(bcache_kobj = kobject_create_and_add("bcache", fs_kobj)) ||
-	    sysfs_create_files(bcache_kobj, files) ||
 	    bch_request_init() ||
-	    bch_debug_init(bcache_kobj))
+	    bch_debug_init(bcache_kobj) ||
+	    sysfs_create_files(bcache_kobj, files))
 		goto err;
 
 	return 0;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 080/101] l2tp: cleanup l2tp_tunnel_delete calls

[alexander.levin]

From: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit 4dc12ffeaeac939097a3f55c881d3dc3523dff0c ]

l2tp_tunnel_delete does not return anything since commit 62b982eeb458
("l2tp: fix race condition in l2tp_tunnel_delete").  But call sites of
l2tp_tunnel_delete still do casts to void to avoid unused return value
warnings.

Kill these now useless casts.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Guillaume Nault <g.nault@alphalink.fr>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 net/l2tp/l2tp_core.c    | 2 +-
 net/l2tp/l2tp_netlink.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index d48281ca9c72..ec8f6a6485e3 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1856,7 +1856,7 @@ static __net_exit void l2tp_exit_net(struct net *net)
 
 	rcu_read_lock_bh();
 	list_for_each_entry_rcu(tunnel, &pn->l2tp_tunnel_list, list) {
-		(void)l2tp_tunnel_delete(tunnel);
+		l2tp_tunnel_delete(tunnel);
 	}
 	rcu_read_unlock_bh();
 }
diff --git a/net/l2tp/l2tp_netlink.c b/net/l2tp/l2tp_netlink.c
index 665cc74df5c5..fb3248ff8b48 100644
--- a/net/l2tp/l2tp_netlink.c
+++ b/net/l2tp/l2tp_netlink.c
@@ -285,7 +285,7 @@ static int l2tp_nl_cmd_tunnel_delete(struct sk_buff *skb, struct genl_info *info
 	l2tp_tunnel_notify(&l2tp_nl_family, info,
 			   tunnel, L2TP_CMD_TUNNEL_DELETE);
 
-	(void) l2tp_tunnel_delete(tunnel);
+	l2tp_tunnel_delete(tunnel);
 
 out:
 	return ret;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 085/101] scsi: hpsa: destroy sas transport properties before scsi_host

[alexander.levin]

From: Martin Wilck <mwilck@suse.de>

[ Upstream commit dfb2e6f46b3074eb85203d8f0888b71ec1c2e37a ]

This patch cleans up a lot of warnings when unloading the driver.

A current example of the stack trace starts with:
    [  142.570715] sysfs group 'power' not found for kobject 'port-5:0'
There can be hundreds of these messages during a driver unload.

I am resubmitting this patch on behalf of Martin Wilck with his
permission.

His original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102085.html

This patch did not help until Hannes's
commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.

---------------------------
Original patch description:
---------------------------

Unloading the hpsa driver causes warnings

[ 1063.793652] WARNING: CPU: 1 PID: 4850 at ../fs/sysfs/group.c:237 device_del+0x54/0x240()
[ 1063.793659] sysfs group ffffffff81cf21a0 not found for kobject 'port-2:0'

with two different stacks:
1)
[ 1063.793774]  [<ffffffff81448af4>] device_del+0x54/0x240
[ 1063.793780]  [<ffffffff8145178a>] transport_remove_classdev+0x4a/0x60
[ 1063.793784]  [<ffffffff81451216>] attribute_container_device_trigger+0xa6/0xb0
[ 1063.793802]  [<ffffffffa0105d46>] sas_port_delete+0x126/0x160 [scsi_transport_sas]
[ 1063.793819]  [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]

2)
[ 1063.797103]  [<ffffffff81448af4>] device_del+0x54/0x240
[ 1063.797118]  [<ffffffffa0105d4e>] sas_port_delete+0x12e/0x160 [scsi_transport_sas]
[ 1063.797134]  [<ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]

This is caused by the fact that host device hostX is deleted before the
SAS transport devices hostX/port-a:b.

This patch fixes this by reverting the order of device deletions.

Tested-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/hpsa.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index b37e85126f63..0c87f341fed4 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8808,6 +8808,8 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 	destroy_workqueue(h->rescan_ctlr_wq);
 	destroy_workqueue(h->resubmit_wq);
 
+	hpsa_delete_sas_host(h);
+
 	/*
 	 * Call before disabling interrupts.
 	 * scsi_remove_host can trigger I/O operations especially
@@ -8842,8 +8844,6 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 	h->lockup_detected = NULL;			/* init_one 2 */
 	/* (void) pci_disable_pcie_error_reporting(pdev); */	/* init_one 1 */
 
-	hpsa_delete_sas_host(h);
-
 	kfree(h);					/* init_one 1 */
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 082/101] xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real

[alexander.levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 5e422f5e4fd71d18bc6b851eeb3864477b3d842e ]

There was one spot in xfs_bmap_add_extent_unwritten_real that didn't use the
passed in new extent state but always converted to normal, leading to wrong
behavior when converting from normal to unwritten.

Only found by code inspection, it seems like this code path to move partial
extent from written to unwritten while merging it with the next extent is
rarely exercised.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/xfs/libxfs/xfs_bmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
index 75884aecf920..d98ba57ef01a 100644
--- a/fs/xfs/libxfs/xfs_bmap.c
+++ b/fs/xfs/libxfs/xfs_bmap.c
@@ -2670,7 +2670,7 @@ xfs_bmap_add_extent_unwritten_real(
 					&i)))
 				goto done;
 			XFS_WANT_CORRUPTED_GOTO(mp, i == 0, done);
-			cur->bc_rec.b.br_state = XFS_EXT_NORM;
+			cur->bc_rec.b.br_state = new->br_state;
 			if ((error = xfs_btree_insert(cur, &i)))
 				goto done;
 			XFS_WANT_CORRUPTED_GOTO(mp, i == 1, done);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 084/101] scsi: hpsa: cleanup sas_phy structures in sysfs when unloading

[alexander.levin]

From: Martin Wilck <mwilck@suse.de>

[ Upstream commit 55ca38b4255bb336c2d35990bdb2b368e19b435a ]

I am resubmitting this patch on behalf of Martin Wilck with his
permission.

The original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102083.html

This patch did not help until Hannes's
commit 9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.

--------------------------------------
Original patch description from Martin:
--------------------------------------

When the hpsa module is unloaded using rmmod, dangling
symlinks remain under /sys/class/sas_phy. Fix this by
calling sas_phy_delete() rather than sas_phy_free (which,
according to comments, should not be called for PHYs that
have been set up successfully, anyway).

Tested-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/hpsa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 2feab0f93fdd..b37e85126f63 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -9335,9 +9335,9 @@ static void hpsa_free_sas_phy(struct hpsa_sas_phy *hpsa_sas_phy)
 	struct sas_phy *phy = hpsa_sas_phy->phy;
 
 	sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy);
-	sas_phy_free(phy);
 	if (hpsa_sas_phy->added_to_port)
 		list_del(&hpsa_sas_phy->phy_list_entry);
+	sas_phy_delete(phy);
 	kfree(hpsa_sas_phy);
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 083/101] PCI: Detach driver before procfs & sysfs teardown on device remove

[alexander.levin]

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit 16b6c8bb687cc3bec914de09061fcb8411951fda ]

When removing a device, for example a VF being removed due to SR-IOV
teardown, a "soft" hot-unplug via 'echo 1 > remove' in sysfs, or an actual
hot-unplug, we first remove the procfs and sysfs attributes for the device
before attempting to release the device from any driver bound to it.
Unbinding the driver from the device can take time.  The device might need
to write out data or it might be actively in use.  If it's in use by
userspace through a vfio driver, the unbind might block until the user
releases the device.  This leads to a potentially non-trivial amount of
time where the device exists, but we've torn down the interfaces that
userspace uses to examine devices, for instance lspci might generate this
sort of error:

  pcilib: Cannot open /sys/bus/pci/devices/0000:01:0a.3/config
  lspci: Unable to read the standard configuration space header of device 0000:01:0a.3

We don't seem to have any dependence on this teardown ordering in the
kernel, so let's unbind the driver first, which is also more symmetric with
the instantiation of the device in pci_bus_add_device().

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/pci/remove.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 8a280e9c2ad1..7e67af2bb366 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -20,9 +20,9 @@ static void pci_stop_dev(struct pci_dev *dev)
 	pci_pme_active(dev, false);
 
 	if (dev->is_added) {
+		device_release_driver(&dev->dev);
 		pci_proc_detach_device(dev);
 		pci_remove_sysfs_dev_files(dev);
-		device_release_driver(&dev->dev);
 		dev->is_added = 0;
 	}
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 089/101] pinctrl: adi2: Fix Kconfig build problem

[alexander.levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 1c363531dd814dc4fe10865722bf6b0f72ce4673 ]

The build robot is complaining on Blackfin:

drivers/pinctrl/pinctrl-adi2.c: In function 'port_setup':
>> drivers/pinctrl/pinctrl-adi2.c:221:21: error: dereferencing
   pointer to incomplete type 'struct gpio_port_t'
      writew(readw(&regs->port_fer) & ~BIT(offset),
                        ^~
drivers/pinctrl/pinctrl-adi2.c: In function 'adi_gpio_ack_irq':
>> drivers/pinctrl/pinctrl-adi2.c:266:18: error: dereferencing
pointer to incomplete type 'struct bfin_pint_regs'
      if (readl(&regs->invert_set) & pintbit)
                     ^~
It seems the driver need to include <asm/gpio.h> and <asm/irq.h>
to compile.

The Blackfin architecture was re-defining the Kconfig
PINCTRL symbol which is not OK, so replaced this with
PINCTRL_BLACKFIN_ADI2 which selects PINCTRL and PINCTRL_ADI2
just like most arches do.

Further, the old GPIO driver symbol GPIO_ADI was possible to
select at the same time as selecting PINCTRL. This was not
working because the arch-local <asm/gpio.h> header contains
an explicit #ifndef PINCTRL clause making compilation break
if you combine them. The same is true for DEBUG_MMRS.

Make sure the ADI2 pinctrl driver is not selected at the same
time as the old GPIO implementation. (This should be converted
to use gpiolib or pincontrol and move to drivers/...) Also make
sure the old GPIO_ADI driver or DEBUG_MMRS is not selected at
the same time as the new PINCTRL implementation, and only make
PINCTRL_ADI2 selectable for the Blackfin families that actually
have it.

This way it is still possible to add e.g. I2C-based pin
control expanders on the Blackfin.

Cc: Steven Miao <realmz6@gmail.com>
Cc: Huanhuan Feng <huanhuan.feng@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/blackfin/Kconfig       | 7 +++++--
 arch/blackfin/Kconfig.debug | 1 +
 drivers/pinctrl/Kconfig     | 3 ++-
 3 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index af76634f8d98..934573cc1134 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -318,11 +318,14 @@ config BF53x
 
 config GPIO_ADI
 	def_bool y
+	depends on !PINCTRL
 	depends on (BF51x || BF52x || BF53x || BF538 || BF539 || BF561)
 
-config PINCTRL
+config PINCTRL_BLACKFIN_ADI2
 	def_bool y
-	depends on BF54x || BF60x
+	depends on (BF54x || BF60x)
+	select PINCTRL
+	select PINCTRL_ADI2
 
 config MEM_MT48LC64M4A2FB_7E
 	bool
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index f3337ee03621..a93cf06a4d6f 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -17,6 +17,7 @@ config DEBUG_VERBOSE
 
 config DEBUG_MMRS
 	tristate "Generate Blackfin MMR tree"
+	depends on !PINCTRL
 	select DEBUG_FS
 	help
 	  Create a tree of Blackfin MMRs via the debugfs tree.  If
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 312c78b27a32..073b6d1e5efa 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -26,7 +26,8 @@ config DEBUG_PINCTRL
 
 config PINCTRL_ADI2
 	bool "ADI pin controller driver"
-	depends on BLACKFIN
+	depends on (BF54x || BF60x)
+	depends on !GPIO_ADI
 	select PINMUX
 	select IRQ_DOMAIN
 	help
-- 
2.11.0

[PATCH AUTOSEL for 4.4 087/101] tty fix oops when rmmod 8250

[alexander.levin]

From: nixiaoming <nixiaoming@huawei.com>

[ Upstream commit c79dde629d2027ca80329c62854a7635e623d527 ]

After rmmod 8250.ko
tty_kref_put starts kwork (release_one_tty) to release proc interface
oops when accessing driver->driver_name in proc_tty_unregister_driver

Use jprobe, found driver->driver_name point to 8250.ko
static static struct uart_driver serial8250_reg
.driver_name= serial,

Use name in proc_dir_entry instead of driver->driver_name to fix oops

test on linux 4.1.12:

BUG: unable to handle kernel paging request at ffffffffa01979de
IP: [<ffffffff81310f40>] strchr+0x0/0x30
PGD 1a0d067 PUD 1a0e063 PMD 851c1f067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: ... ...  [last unloaded: 8250]
CPU: 7 PID: 116 Comm: kworker/7:1 Tainted: G           O    4.1.12 #1
Hardware name: Insyde RiverForest/Type2 - Board Product Name1, BIOS NE5KV904 12/21/2015
Workqueue: events release_one_tty
task: ffff88085b684960 ti: ffff880852884000 task.ti: ffff880852884000
RIP: 0010:[<ffffffff81310f40>]  [<ffffffff81310f40>] strchr+0x0/0x30
RSP: 0018:ffff880852887c90  EFLAGS: 00010282
RAX: ffffffff81a5eca0 RBX: ffffffffa01979de RCX: 0000000000000004
RDX: ffff880852887d10 RSI: 000000000000002f RDI: ffffffffa01979de
RBP: ffff880852887cd8 R08: 0000000000000000 R09: ffff88085f5d94d0
R10: 0000000000000195 R11: 0000000000000000 R12: ffffffffa01979de
R13: ffff880852887d00 R14: ffffffffa01979de R15: ffff88085f02e840
FS:  0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa01979de CR3: 0000000001a0c000 CR4: 00000000001406e0
Stack:
 ffffffff812349b1 ffff880852887cb8 ffff880852887d10 ffff88085f5cd6c2
 ffff880852800a80 ffffffffa01979de ffff880852800a84 0000000000000010
 ffff88085bb28bd8 ffff880852887d38 ffffffff812354f0 ffff880852887d08
Call Trace:
 [<ffffffff812349b1>] ? __xlate_proc_name+0x71/0xd0
 [<ffffffff812354f0>] remove_proc_entry+0x40/0x180
 [<ffffffff815f6811>] ? _raw_spin_lock_irqsave+0x41/0x60
 [<ffffffff813be520>] ? destruct_tty_driver+0x60/0xe0
 [<ffffffff81237c68>] proc_tty_unregister_driver+0x28/0x40
 [<ffffffff813be548>] destruct_tty_driver+0x88/0xe0
 [<ffffffff813be5bd>] tty_driver_kref_put+0x1d/0x20
 [<ffffffff813becca>] release_one_tty+0x5a/0xd0
 [<ffffffff81074159>] process_one_work+0x139/0x420
 [<ffffffff810745a1>] worker_thread+0x121/0x450
 [<ffffffff81074480>] ? process_scheduled_works+0x40/0x40
 [<ffffffff8107a16c>] kthread+0xec/0x110
 [<ffffffff81080000>] ? tg_rt_schedulable+0x210/0x220
 [<ffffffff8107a080>] ? kthread_freezable_should_stop+0x80/0x80
 [<ffffffff815f7292>] ret_from_fork+0x42/0x70
 [<ffffffff8107a080>] ? kthread_freezable_should_stop+0x80/0x80

Signed-off-by: nixiaoming <nixiaoming@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/proc/proc_tty.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/proc/proc_tty.c b/fs/proc/proc_tty.c
index 15f327bed8c6..7340c36978a3 100644
--- a/fs/proc/proc_tty.c
+++ b/fs/proc/proc_tty.c
@@ -14,6 +14,7 @@
 #include <linux/tty.h>
 #include <linux/seq_file.h>
 #include <linux/bitops.h>
+#include "internal.h"
 
 /*
  * The /proc/tty directory inodes...
@@ -164,7 +165,7 @@ void proc_tty_unregister_driver(struct tty_driver *driver)
 	if (!ent)
 		return;
 		
-	remove_proc_entry(driver->driver_name, proc_tty_driver);
+	remove_proc_entry(ent->name, proc_tty_driver);
 	
 	driver->proc_entry = NULL;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.4 086/101] powerpc/perf/hv-24x7: Fix incorrect comparison in memord

[alexander.levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 05c14c03138532a3cb2aa29c2960445c8753343b ]

In the hv-24x7 code there is a function memord() which tries to
implement a sort function return -1, 0, 1. However one of the
conditions is incorrect, such that it can never be true, because we
will have already returned.

I don't believe there is a bug in practice though, because the
comparisons are an optimisation prior to calling memcmp().

Fix it by swapping the second comparision, so it can be true.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 arch/powerpc/perf/hv-24x7.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c
index 9f9dfda9ed2c..e8ca0fad2e69 100644
--- a/arch/powerpc/perf/hv-24x7.c
+++ b/arch/powerpc/perf/hv-24x7.c
@@ -514,7 +514,7 @@ static int memord(const void *d1, size_t s1, const void *d2, size_t s2)
 {
 	if (s1 < s2)
 		return 1;
-	if (s2 > s1)
+	if (s1 > s2)
 		return -1;
 
 	return memcmp(d1, d2, s1);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 088/101] dmaengine: rcar-dmac: use TCRB instead of TCR for residue

[alexander.levin]

From: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>

[ Upstream commit 847449f23dcbff68234525f90dd53c7c7db18cad ]

SYS/RT/Audio DMAC includes independent data buffers for reading
and writing. Therefore, the read transfer counter and write transfer
counter have different values.
TCR indicates read counter, and TCRB indicates write counter.
The relationship is like below.

        TCR       TCRB
[SOURCE] -> [DMAC] -> [SINK]

In the MEM_TO_DEV direction, what really matters is how much data has
been written to the device. If the DMA is interrupted between read and
write, then, the data doesn't end up in the destination, so shouldn't
be counted. TCRB is thus the register we should use in this cases.

In the DEV_TO_MEM direction, the situation is more complex. Both the
read and write side are important. What matters from a data consumer
point of view is how much data has been written to memory.
On the other hand, if the transfer is interrupted between read and
write, we'll end up losing data. It can also be important to report.

In the MEM_TO_MEM direction, what matters is of course how much data
has been written to memory from data consumer point of view.
Here, because read and write have independent data buffers, it will
take a while for TCR and TCRB to become equal. Thus we should check
TCRB in this case, too.

Thus, all cases we should check TCRB instead of TCR.

Without this patch, Sound Capture has noise after PluseAudio support
(= 07b7acb51d2 ("ASoC: rsnd: update pointer more accurate")), because
the recorder will use wrong residue counter which indicates transferred
from sound device, but in reality the data was not yet put to memory
and recorder will record it.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
[Kuninori: added detail information in log]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/dma/sh/rcar-dmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index 7820d07e7bee..3e83d02d9ae3 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -1180,7 +1180,7 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan,
 	}
 
 	/* Add the residue for the current chunk. */
-	residue += rcar_dmac_chan_read(chan, RCAR_DMATCR) << desc->xfer_shift;
+	residue += rcar_dmac_chan_read(chan, RCAR_DMATCRB) << desc->xfer_shift;
 
 	return residue;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.4 090/101] raid5: Set R5_Expanded on parity devices as well as data.

[alexander.levin]

From: NeilBrown <neilb@suse.com>

[ Upstream commit 235b6003fb28f0dd8e7ed8fbdb088bb548291766 ]

When reshaping a fully degraded raid5/raid6 to a larger
nubmer of devices, the new device(s) are not in-sync
and so that can make the newly grown stripe appear to be
"failed".
To avoid this, we set the R5_Expanded flag to say "Even though
this device is not fully in-sync, this block is safe so
don't treat the device as failed for this stripe".
This flag is set for data devices, not not for parity devices.

Consequently, if you have a RAID6 with two devices that are partly
recovered and a spare, and start a reshape to include the spare,
then when the reshape gets past the point where the recovery was
up to, it will think the stripes are failed and will get into
an infinite loop, failing to make progress.

So when contructing parity on an EXPAND_READY stripe,
set R5_Expanded.

Reported-by: Curt <lightspd@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/md/raid5.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d55bf85b76ce..86ab6d14d782 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1681,8 +1681,11 @@ static void ops_complete_reconstruct(void *stripe_head_ref)
 		struct r5dev *dev = &sh->dev[i];
 
 		if (dev->written || i == pd_idx || i == qd_idx) {
-			if (!discard && !test_bit(R5_SkipCopy, &dev->flags))
+			if (!discard && !test_bit(R5_SkipCopy, &dev->flags)) {
 				set_bit(R5_UPTODATE, &dev->flags);
+				if (test_bit(STRIPE_EXPAND_READY, &sh->state))
+					set_bit(R5_Expanded, &dev->flags);
+			}
 			if (fua)
 				set_bit(R5_WantFUA, &dev->flags);
 			if (sync)
-- 
2.11.0

[PATCH AUTOSEL for 4.4 091/101] scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry

[alexander.levin]

From: Kurt Garloff <garloff@suse.de>

[ Upstream commit 909cf3e16a5274fe2127cf3cea5c8dba77b2c412 ]

All EMC SYMMETRIX support REPORT_LUNS, even if configured to report
SCSI-2 for whatever reason.

Signed-off-by: Kurt Garloff <garloff@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/scsi_devinfo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 11cdb172cfaf..60720e5b1ebc 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -160,7 +160,7 @@ static struct {
 	{"DGC", "RAID", NULL, BLIST_SPARSELUN},	/* Dell PV 650F, storage on LUN 0 */
 	{"DGC", "DISK", NULL, BLIST_SPARSELUN},	/* Dell PV 650F, no storage on LUN 0 */
 	{"EMC",  "Invista", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
-	{"EMC", "SYMMETRIX", NULL, BLIST_SPARSELUN | BLIST_LARGELUN | BLIST_FORCELUN},
+	{"EMC", "SYMMETRIX", NULL, BLIST_SPARSELUN | BLIST_LARGELUN | BLIST_REPORTLUN2},
 	{"EMULEX", "MD21/S2     ESDI", NULL, BLIST_SINGLELUN},
 	{"easyRAID", "16P", NULL, BLIST_NOREPORTLUN},
 	{"easyRAID", "X6P", NULL, BLIST_NOREPORTLUN},
-- 
2.11.0

[PATCH AUTOSEL for 4.4 093/101] ASoC: samsung: i2s: disable secondary DAI until it gets fixed

[alexander.levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 064970a0aae978073a859aaf0793bfe14762d4f3 ]

Secondary DAI in Exynos I2S driver is not used by any of the currently
supported boards and it causes problems due to some limitations in the
ASoC code. Disable it until it gets proper support both by board-specific
and ASoC core code. Also disable IDMA support, which relies on secondary
DAI presence.

This patch fixes following kernel warning:
samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
samsung-i2s 3830000.i2s: ASoC: Failed to create component debugfs directory
------------[ cut here ]------------
WARNING: CPU: 3 PID: 82 at fs/proc/generic.c:330 proc_register+0xec/0x10c
proc_dir_entry 'sub0/prealloc' already registered
Modules linked in:
CPU: 3 PID: 82 Comm: kworker/3:1 Not tainted 4.14.0-rc5-next-20171017 #3089
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
[<c0110114>] (unwind_backtrace) from [<c010c900>] (show_stack+0x10/0x14)
[<c010c900>] (show_stack) from [<c083e664>] (dump_stack+0x90/0xc8)
[<c083e664>] (dump_stack) from [<c011d2b8>] (__warn+0xd4/0x100)
[<c011d2b8>] (__warn) from [<c011d384>] (warn_slowpath_fmt+0x38/0x48)
[<c011d384>] (warn_slowpath_fmt) from [<c0271268>] (proc_register+0xec/0x10c)
[<c0271268>] (proc_register) from [<c027130c>] (proc_create_data+0x84/0xc8)
[<c027130c>] (proc_create_data) from [<c061afbc>] (snd_info_register+0x64/0xcc)
[<c061afbc>] (snd_info_register) from [<c062a6e0>] (snd_pcm_lib_preallocate_pages1+0x78/0x1a0)
[<c062a6e0>] (snd_pcm_lib_preallocate_pages1) from [<c063eef4>] (dmaengine_pcm_new+0xa0/0x1ec)
[<c063eef4>] (dmaengine_pcm_new) from [<c062b9f8>] (snd_soc_platform_drv_pcm_new+0x1c/0x28)
[<c062b9f8>] (snd_soc_platform_drv_pcm_new) from [<c063d54c>] (soc_new_pcm+0x2f4/0x4f4)
[<c063d54c>] (soc_new_pcm) from [<c063107c>] (snd_soc_register_card+0xc4c/0xdc4)
[<c063107c>] (snd_soc_register_card) from [<c063db30>] (devm_snd_soc_register_card+0x34/0x70)
[<c063db30>] (devm_snd_soc_register_card) from [<c064af60>] (asoc_simple_card_probe+0x230/0x47c)
[<c064af60>] (asoc_simple_card_probe) from [<c047f8fc>] (platform_drv_probe+0x50/0xb0)
[<c047f8fc>] (platform_drv_probe) from [<c047dee0>] (driver_probe_device+0x2a0/0x46c)
[<c047dee0>] (driver_probe_device) from [<c047c0bc>] (bus_for_each_drv+0x44/0x8c)
[<c047c0bc>] (bus_for_each_drv) from [<c047db50>] (__device_attach+0xa0/0x134)
[<c047db50>] (__device_attach) from [<c047cf7c>] (bus_probe_device+0x88/0x90)
[<c047cf7c>] (bus_probe_device) from [<c047d484>] (deferred_probe_work_func+0x3c/0x168)
[<c047d484>] (deferred_probe_work_func) from [<c01371f8>] (process_one_work+0x188/0x41c)
[<c01371f8>] (process_one_work) from [<c01374b4>] (process_scheduled_works+0x28/0x38)
[<c01374b4>] (process_scheduled_works) from [<c01376d4>] (worker_thread+0x210/0x4dc)
[<c01376d4>] (worker_thread) from [<c013d9cc>] (kthread+0x128/0x164)
[<c013d9cc>] (kthread) from [<c0108848>] (ret_from_fork+0x14/0x2c)
---[ end trace bad8db6ee771d094 ]--

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 sound/soc/samsung/i2s.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index fd6e247d9fd8..f72b8137bf84 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -1286,6 +1286,7 @@ static int samsung_i2s_probe(struct platform_device *pdev)
 			}
 		}
 	}
+	quirks &= ~(QUIRK_SEC_DAI | QUIRK_SUPPORTS_IDMA);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pri_dai->addr = devm_ioremap_resource(&pdev->dev, res);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 092/101] vt6655: Fix a possible sleep-in-atomic bug in vt6655_suspend

[alexander.levin]

From: Jia-Ju Bai <baijiaju1990@163.com>

[ Upstream commit 42c8eb3f6e15367981b274cb79ee4657e2c6949d ]

The driver may sleep under a spinlock, and the function call path is:
vt6655_suspend (acquire the spinlock)
  pci_set_power_state
    __pci_start_power_transition (drivers/pci/pci.c)
      msleep --> may sleep

To fix it, pci_set_power_state is called without having a spinlock.

This bug is found by my static analysis tool and my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/staging/vt6655/device_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index fefbf826c622..8fd8f3a2d1bf 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -1693,10 +1693,11 @@ static int vt6655_suspend(struct pci_dev *pcid, pm_message_t state)
 	MACbShutdown(priv->PortOffset);
 
 	pci_disable_device(pcid);
-	pci_set_power_state(pcid, pci_choose_state(pcid, state));
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
+	pci_set_power_state(pcid, pci_choose_state(pcid, state));
+
 	return 0;
 }
 
-- 
2.11.0

[PATCH AUTOSEL for 4.4 096/101] scsi: bfa: integer overflow in debugfs

[alexander.levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 3e351275655d3c84dc28abf170def9786db5176d ]

We could allocate less memory than intended because we do:

	bfad->regdata = kzalloc(len << 2, GFP_KERNEL);

The shift can overflow leading to a crash.  This is debugfs code so the
impact is very small.  I fixed the network version of this in March with
commit 13e2d5187f6b ("bna: integer overflow bug in debugfs").

Fixes: ab2a9ba189e8 ("[SCSI] bfa: add debugfs support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/bfa/bfad_debugfs.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/bfa/bfad_debugfs.c b/drivers/scsi/bfa/bfad_debugfs.c
index 74a307c0a240..8f1c58d4d5b5 100644
--- a/drivers/scsi/bfa/bfad_debugfs.c
+++ b/drivers/scsi/bfa/bfad_debugfs.c
@@ -254,7 +254,8 @@ bfad_debugfs_write_regrd(struct file *file, const char __user *buf,
 	struct bfad_s *bfad = port->bfad;
 	struct bfa_s *bfa = &bfad->bfa;
 	struct bfa_ioc_s *ioc = &bfa->ioc;
-	int addr, len, rc, i;
+	int addr, rc, i;
+	u32 len;
 	u32 *regbuf;
 	void __iomem *rb, *reg_addr;
 	unsigned long flags;
@@ -265,7 +266,7 @@ bfad_debugfs_write_regrd(struct file *file, const char __user *buf,
 		return PTR_ERR(kern_buf);
 
 	rc = sscanf(kern_buf, "%x:%x", &addr, &len);
-	if (rc < 2) {
+	if (rc < 2 || len > (UINT_MAX >> 2)) {
 		printk(KERN_INFO
 			"bfad[%d]: %s failed to read user buf\n",
 			bfad->inst_no, __func__);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 095/101] scsi: sd: change allow_restart to bool in sysfs interface

[alexander.levin]

From: weiping zhang <zhangweiping@didichuxing.com>

[ Upstream commit 658e9a6dc1126f21fa417cd213e1cdbff8be0ba2 ]

/sys/class/scsi_disk/0:2:0:0/allow_restart can be changed to 0
unexpectedly by writing an invalid string such as the following:

echo asdf > /sys/class/scsi_disk/0:2:0:0/allow_restart

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/sd.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 19bfa7646c2b..dd72205ba298 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -259,6 +259,7 @@ static ssize_t
 allow_restart_store(struct device *dev, struct device_attribute *attr,
 		    const char *buf, size_t count)
 {
+	bool v;
 	struct scsi_disk *sdkp = to_scsi_disk(dev);
 	struct scsi_device *sdp = sdkp->device;
 
@@ -268,7 +269,10 @@ allow_restart_store(struct device *dev, struct device_attribute *attr,
 	if (sdp->type != TYPE_DISK)
 		return -EINVAL;
 
-	sdp->allow_restart = simple_strtoul(buf, NULL, 10);
+	if (kstrtobool(buf, &v))
+		return -EINVAL;
+
+	sdp->allow_restart = v;
 
 	return count;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.4 097/101] udf: Avoid overflow when session starts at large offset

[alexander.levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit abdc0eb06964fe1d2fea6dd1391b734d0590365d ]

When session starts beyond offset 2^31 the arithmetics in
udf_check_vsd() would overflow. Make sure the computation is done in
large enough type.

Reported-by: Cezary Sliwa <sliwa@ifpan.edu.pl>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 fs/udf/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/udf/super.c b/fs/udf/super.c
index 81155b9b445b..ee09c97f3ab2 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -705,7 +705,7 @@ static loff_t udf_check_vsd(struct super_block *sb)
 	else
 		sectorsize = sb->s_blocksize;
 
-	sector += (sbi->s_session << sb->s_blocksize_bits);
+	sector += (((loff_t)sbi->s_session) << sb->s_blocksize_bits);
 
 	udf_debug("Starting at sector %u (%ld byte sectors)\n",
 		  (unsigned int)(sector >> sb->s_blocksize_bits),
-- 
2.11.0

[PATCH AUTOSEL for 4.4 094/101] scsi: sd: change manage_start_stop to bool in sysfs interface

[alexander.levin]

From: weiping zhang <zhangweiping@didichuxing.com>

[ Upstream commit 623401ee33e42cee64d333877892be8db02951eb ]

/sys/class/scsi_disk/0:2:0:0/manage_start_stop can be changed to 0
unexpectly by writing an invalid string.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/scsi/sd.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 7e1681cf287c..19bfa7646c2b 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -233,11 +233,15 @@ manage_start_stop_store(struct device *dev, struct device_attribute *attr,
 {
 	struct scsi_disk *sdkp = to_scsi_disk(dev);
 	struct scsi_device *sdp = sdkp->device;
+	bool v;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
 
-	sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
+	if (kstrtobool(buf, &v))
+		return -EINVAL;
+
+	sdp->manage_start_stop = v;
 
 	return count;
 }
-- 
2.11.0

[PATCH AUTOSEL for 4.4 098/101] macvlan: Only deliver one copy of the frame to the macvlan interface

[alexander.levin]

From: Alexander Duyck <alexander.h.duyck@intel.com>

[ Upstream commit dd6b9c2c332b40f142740d1b11fb77c653ff98ea ]

This patch intoduces a slight adjustment for macvlan to address the fact
that in source mode I was seeing two copies of any packet addressed to the
macvlan interface being delivered where there should have been only one.

The issue appears to be that one copy was delivered based on the source MAC
address and then the second copy was being delivered based on the
destination MAC address. To fix it I am just treating a unicast address
match as though it is not a match since source based macvlan isn't supposed
to be matching based on the destination MAC anyway.

Fixes: 79cf79abce71 ("macvlan: add source mode")
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/macvlan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 40cd86614677..9897cabec371 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -441,7 +441,7 @@ static rx_handler_result_t macvlan_handle_frame(struct sk_buff **pskb)
 					      struct macvlan_dev, list);
 	else
 		vlan = macvlan_hash_lookup(port, eth->h_dest);
-	if (vlan == NULL)
+	if (!vlan || vlan->mode == MACVLAN_MODE_SOURCE)
 		return RX_HANDLER_PASS;
 
 	dev = vlan->dev;
-- 
2.11.0

[PATCH AUTOSEL for 4.4 100/101] IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop

[alexander.levin]

From: Alex Vesker <valex@mellanox.com>

[ Upstream commit b4b678b06f6eef18bff44a338c01870234db0bc9 ]

When ndo_open and ndo_stop are called RTNL lock should be held.
In this specific case ipoib_ib_dev_open calls the offloaded ndo_open
which re-sets the number of TX queue assuming RTNL lock is held.
Since RTNL lock is not held, RTNL assert will fail.

Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_ib.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 8f8c3af9f4e8..d3f0a384faad 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -1044,10 +1044,15 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv,
 		ipoib_ib_dev_down(dev);
 
 	if (level == IPOIB_FLUSH_HEAVY) {
+		rtnl_lock();
 		if (test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
 			ipoib_ib_dev_stop(dev);
-		if (ipoib_ib_dev_open(dev) != 0)
+
+		result = ipoib_ib_dev_open(dev);
+		rtnl_unlock();
+		if (result)
 			return;
+
 		if (netif_queue_stopped(dev))
 			netif_start_queue(dev);
 	}
-- 
2.11.0

[PATCH AUTOSEL for 4.4 099/101] RDMA/cma: Avoid triggering undefined behavior

[alexander.levin]

From: Bart Van Assche <bart.vanassche@wdc.com>

[ Upstream commit c0b64f58e8d49570aa9ee55d880f92c20ff0166b ]

According to the C standard the behavior of computations with
integer operands is as follows:
* A computation involving unsigned operands can never overflow,
  because a result that cannot be represented by the resulting
  unsigned integer type is reduced modulo the number that is one
  greater than the largest value that can be represented by the
  resulting type.
* The behavior for signed integer underflow and overflow is
  undefined.

Hence only use unsigned integers when checking for integer
overflow.

This patch is what I came up with after having analyzed the
following smatch warnings:

drivers/infiniband/core/cma.c:3448: cma_resolve_ib_udp() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len'
drivers/infiniband/core/cma.c:3505: cma_connect_ib() warn: signed overflow undefined. 'offset + conn_param->private_data_len < conn_param->private_data_len'

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/infiniband/core/cma.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 43d5166db4c6..e354358db77b 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -1353,7 +1353,7 @@ static struct rdma_id_private *cma_id_from_event(struct ib_cm_id *cm_id,
 	return id_priv;
 }
 
-static inline int cma_user_data_offset(struct rdma_id_private *id_priv)
+static inline u8 cma_user_data_offset(struct rdma_id_private *id_priv)
 {
 	return cma_family(id_priv) == AF_IB ? 0 : sizeof(struct cma_hdr);
 }
@@ -1731,7 +1731,8 @@ static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event)
 	struct rdma_id_private *listen_id, *conn_id;
 	struct rdma_cm_event event;
 	struct net_device *net_dev;
-	int offset, ret;
+	u8 offset;
+	int ret;
 
 	listen_id = cma_id_from_event(cm_id, ib_event, &net_dev);
 	if (IS_ERR(listen_id))
@@ -3118,7 +3119,8 @@ static int cma_resolve_ib_udp(struct rdma_id_private *id_priv,
 	struct ib_cm_sidr_req_param req;
 	struct ib_cm_id	*id;
 	void *private_data;
-	int offset, ret;
+	u8 offset;
+	int ret;
 
 	memset(&req, 0, sizeof req);
 	offset = cma_user_data_offset(id_priv);
@@ -3175,7 +3177,8 @@ static int cma_connect_ib(struct rdma_id_private *id_priv,
 	struct rdma_route *route;
 	void *private_data;
 	struct ib_cm_id	*id;
-	int offset, ret;
+	u8 offset;
+	int ret;
 
 	memset(&req, 0, sizeof req);
 	offset = cma_user_data_offset(id_priv);
-- 
2.11.0

[PATCH AUTOSEL for 4.4 101/101] ath9k: fix tx99 potential info leak

[alexander.levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit ee0a47186e2fa9aa1c56cadcea470ca0ba8c8692 ]

When the user sets count to zero the string buffer would remain
completely uninitialized which causes the kernel to parse its
own stack data, potentially leading to an info leak. In addition
to that, the string might be not terminated properly when the
user data does not contain a 0-terminator.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Reviewed-by: Christoph Böhmwalder <christoph@boehmwalder.at>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
 drivers/net/wireless/ath/ath9k/tx99.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/tx99.c b/drivers/net/wireless/ath/ath9k/tx99.c
index b4e6304afd40..7ee1a3183a06 100644
--- a/drivers/net/wireless/ath/ath9k/tx99.c
+++ b/drivers/net/wireless/ath/ath9k/tx99.c
@@ -180,6 +180,9 @@ static ssize_t write_file_tx99(struct file *file, const char __user *user_buf,
 	ssize_t len;
 	int r;
 
+	if (count < 1)
+		return -EINVAL;
+
 	if (sc->cur_chan->nvifs > 1)
 		return -EOPNOTSUPP;
 
@@ -187,6 +190,8 @@ static ssize_t write_file_tx99(struct file *file, const char __user *user_buf,
 	if (copy_from_user(buf, user_buf, len))
 		return -EFAULT;
 
+	buf[len] = '\0';
+
 	if (strtobool(buf, &start))
 		return -EINVAL;
 
-- 
2.11.0