From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
To: <gregkh@linuxfoundation.org>
Cc: <devel@driverdev.osuosl.org>, <linux-kernel@vger.kernel.org>,
<bogdan.purcareata@nxp.com>
Subject: [PATCH 6/6] staging: fsl-dpaa2/eth: Make Tx buffer alignment optional
Date: Fri, 8 Dec 2017 06:47:58 -0600 [thread overview]
Message-ID: <20171208124758.2732-7-ruxandra.radulescu@nxp.com> (raw)
In-Reply-To: <20171208124758.2732-1-ruxandra.radulescu@nxp.com>
Aligning the Tx buffers at 64B is a performance optimization
recommendation, not a hard requirement.
Make optional the alignment of Tx FD buffers, without enforcing
a reallocation in case there is not enough headroom for it.
On Rx, we keep allocating buffers with enough headroom to allow
Tx alignment of forwarded frames.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
---
drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 14 ++++++++++----
drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h | 2 +-
2 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
index 8edb7c1..7f3e4fa 100644
--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
+++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
@@ -433,13 +433,19 @@ static int build_single_fd(struct dpaa2_eth_priv *priv,
struct dpaa2_fd *fd)
{
struct device *dev = priv->net_dev->dev.parent;
- u8 *buffer_start;
+ u8 *buffer_start, *aligned_start;
struct sk_buff **skbh;
dma_addr_t addr;
- buffer_start = PTR_ALIGN(skb->data -
- dpaa2_eth_needed_headroom(priv, skb),
- DPAA2_ETH_TX_BUF_ALIGN);
+ buffer_start = skb->data - dpaa2_eth_needed_headroom(priv, skb);
+
+ /* If there's enough room to align the FD address, do it.
+ * It will help hardware optimize accesses.
+ */
+ aligned_start = PTR_ALIGN(buffer_start - DPAA2_ETH_TX_BUF_ALIGN,
+ DPAA2_ETH_TX_BUF_ALIGN);
+ if (aligned_start >= skb->head)
+ buffer_start = aligned_start;
/* Store a backpointer to the skb at the beginning of the buffer
* (in the private data area) such that we can release it
diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
index 4ea41d8..d68ac38 100644
--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
+++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
@@ -370,7 +370,7 @@ unsigned int dpaa2_eth_needed_headroom(struct dpaa2_eth_priv *priv,
if (skb_is_nonlinear(skb))
return 0;
- return DPAA2_ETH_SWA_SIZE + DPAA2_ETH_TX_BUF_ALIGN;
+ return DPAA2_ETH_SWA_SIZE;
}
/* Extra headroom space requested to hardware, in order to make sure there's
--
2.7.4
prev parent reply other threads:[~2017-12-08 12:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-08 12:47 [PATCH 0/6] staging: fsl-dpaa2/eth: Frame buffer optimizations Ioana Radulescu
2017-12-08 12:47 ` [PATCH 1/6] staging: fsl-dpaa2/eth: Fix access to FAS field Ioana Radulescu
2017-12-08 12:47 ` [PATCH 2/6] staging: fsl-dpaa2/eth: Don't set netdev->needed_headroom Ioana Radulescu
2017-12-08 12:47 ` [PATCH 3/6] staging: fsl-dpaa2/eth: Add counter for skb reallocs Ioana Radulescu
2017-12-08 12:47 ` [PATCH 4/6] staging: fsl-dpaa2/eth: Don't enable FAS on Tx Ioana Radulescu
2017-12-08 12:47 ` [PATCH 5/6] staging: fsl-dpaa2/eth: Compute needed headroom per frame Ioana Radulescu
2017-12-08 12:47 ` Ioana Radulescu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171208124758.2732-7-ruxandra.radulescu@nxp.com \
--to=ruxandra.radulescu@nxp.com \
--cc=bogdan.purcareata@nxp.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®