From: alexander.levin@verizon.com
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"stable@vger.kernel.org" <stable@vger.kernel.org>
Cc: Christian Lamparter <chunkeey@gmail.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
alexander.levin@verizon.com
Subject: [PATCH AUTOSEL for 3.18 28/40] crypto: crypto4xx - increase context and scatter ring buffer elements
Date: Wed, 13 Dec 2017 01:59:18 +0000 [thread overview]
Message-ID: <20171213015905.7059-28-alexander.levin@verizon.com> (raw)
In-Reply-To: <20171213015905.7059-1-alexander.levin@verizon.com>
From: Christian Lamparter <chunkeey@gmail.com>
[ Upstream commit 778f81d6cdb7d25360f082ac0384d5103f04eca5 ]
If crypto4xx is used in conjunction with dm-crypt, the available
ring buffer elements are not enough to handle the load properly.
On an aes-cbc-essiv:sha256 encrypted swap partition the read
performance is abyssal: (tested with hdparm -t)
/dev/mapper/swap_crypt:
Timing buffered disk reads: 14 MB in 3.68 seconds = 3.81 MB/sec
The patch increases both PPC4XX_NUM_SD and PPC4XX_NUM_PD to 256.
This improves the performance considerably:
/dev/mapper/swap_crypt:
Timing buffered disk reads: 104 MB in 3.03 seconds = 34.31 MB/sec
Furthermore, PPC4XX_LAST_SD, PPC4XX_LAST_GD and PPC4XX_LAST_PD
can be easily calculated from their respective PPC4XX_NUM_*
constant.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
---
drivers/crypto/amcc/crypto4xx_core.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/crypto/amcc/crypto4xx_core.h b/drivers/crypto/amcc/crypto4xx_core.h
index bac0bdeb4b5f..b6529b9fcbe2 100644
--- a/drivers/crypto/amcc/crypto4xx_core.h
+++ b/drivers/crypto/amcc/crypto4xx_core.h
@@ -32,12 +32,12 @@
#define PPC405EX_CE_RESET 0x00000008
#define CRYPTO4XX_CRYPTO_PRIORITY 300
-#define PPC4XX_LAST_PD 63
-#define PPC4XX_NUM_PD 64
-#define PPC4XX_LAST_GD 1023
+#define PPC4XX_NUM_PD 256
+#define PPC4XX_LAST_PD (PPC4XX_NUM_PD - 1)
#define PPC4XX_NUM_GD 1024
-#define PPC4XX_LAST_SD 63
-#define PPC4XX_NUM_SD 64
+#define PPC4XX_LAST_GD (PPC4XX_NUM_GD - 1)
+#define PPC4XX_NUM_SD 256
+#define PPC4XX_LAST_SD (PPC4XX_NUM_SD - 1)
#define PPC4XX_SD_BUFFER_SIZE 2048
#define PD_ENTRY_INUSE 1
--
2.11.0
next prev parent reply other threads:[~2017-12-13 2:08 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-13 1:59 [PATCH AUTOSEL for 3.18 01/40] ALSA: hda - add support for docking station for HP 820 G2 alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 02/40] cpuidle: Validate cpu_dev in cpuidle_add_sysfs() alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 03/40] r8152: fix the list rx_done may be used without initialization alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 06/40] usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 04/40] crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 07/40] usb: gadget: udc: remove pointer dereference after free alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 05/40] net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4 alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 10/40] scsi: lpfc: Fix PT2PT PRLI reject alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 09/40] netfilter: nfnl_cthelper: Fix memory leak alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 08/40] netfilter: nfnl_cthelper: fix runtime expectation policy updates alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 11/40] KVM: x86: correct async page present tracepoint alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 15/40] HID: xinmo: fix for out of range for THT 2P arcade controller alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 14/40] i2c: mux: pca954x: Add missing pca9546 definition to chip_desc alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 13/40] hwmon: (asus_atk0110) fix uninitialized data access alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 12/40] ARM: dts: ti: fix PCI bus dtc warnings alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 18/40] i40e: Do not enable NAPI on q_vectors that have no rings alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 17/40] net: Do not allow negative values for busy_read and busy_poll sysctl interfaces alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 16/40] s390/qeth: no ETH header for outbound AF_IUCV alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 19/40] irda: vlsi_ir: fix check for DMA mapping errors alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 22/40] ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 20/40] netfilter: nfnl_cthelper: fix a race when walk the nf_ct_helper_hash table alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 23/40] isdn: kcapi: avoid uninitialized data alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 21/40] netfilter: nf_nat_snmp: Fix panic when snmp_trap_helper fails to register alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 24/40] xhci: plat: Register shutdown for xhci_plat alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 27/40] backlight: pwm_bl: Fix overflow condition alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 26/40] cpuidle: powernv: Pass correct drv->cpumask for registration alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 25/40] ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory alexander.levin
2017-12-13 1:59 ` alexander.levin [this message]
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 31/40] scsi: cxgb4i: fix Tx skb leak alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 30/40] PCI: Avoid bus reset if bridge itself is broken alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 29/40] net: phy: at803x: Change error to EINVAL for invalid MAC alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 33/40] igb: check memory allocation failure alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 34/40] PCI/AER: Report non-fatal errors only to the affected endpoint alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 35/40] percpu: don't forget to free the temporary struct pcpu_alloc_info alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 32/40] PCI: Create SR-IOV virtfn/physfn links before attaching driver alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 37/40] scsi: lpfc: Fix secure firmware updates alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 38/40] scsi: lpfc: PLOGI failures during NPIV testing alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 39/40] fm10k: ensure we process SM mbx when processing VF mbx alexander.levin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 36/40] powerpc/xmon: Avoid tripping SMP hardlockup watchdog alexander.levin
2017-12-13 13:10 ` Michael Ellerman
2017-12-13 13:44 ` alexander.levin
2018-01-30 4:35 ` Michael Ellerman
2018-02-03 5:58 ` Nicholas Piggin
2017-12-13 1:59 ` [PATCH AUTOSEL for 3.18 40/40] tcp: fix under-evaluated ssthresh in TCP Vegas alexander.levin
2017-12-21 9:54 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171213015905.7059-28-alexander.levin@verizon.com \
--to=alexander.levin@verizon.com \
--cc=chunkeey@gmail.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®