mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: Ralf Baechle <ralf@linux-mips.org>, James Hogan <jhogan@kernel.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>,
	linux-kernel@vger.kernel.org, linux-mips@linux-mips.org,
	Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v7 10/14] MIPS: ingenic: Detect machtype from SoC compatible string
Date: Tue, 16 Jan 2018 16:48:00 +0100	[thread overview]
Message-ID: <20180116154804.21150-11-paul@crapouillou.net> (raw)
In-Reply-To: <20180116154804.21150-1-paul@crapouillou.net>

Previously, the mips_machtype variable was always initialized
to MACH_INGENIC_JZ4740 even if running on different SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/jz4740/prom.c  |  1 -
 arch/mips/jz4740/setup.c | 22 +++++++++++++++++++---
 2 files changed, 19 insertions(+), 4 deletions(-)

 v2: No change
 v3: No change
 v4: No change
 v5: Use SPDX license identifier
 v6: Init mips_machtype from DT compatible string instead of using
     MIPS_MACHINE
 v7: Fix system name not initialized

diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index a62dd8e6ecf9..eb9f2f97bedb 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -25,7 +25,6 @@
 
 void __init prom_init(void)
 {
-	mips_machtype = MACH_INGENIC_JZ4740;
 	fw_init_cmdline();
 }
 
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index 6d0152321819..afb40f8bce96 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -53,6 +53,16 @@ static void __init jz4740_detect_mem(void)
 	add_memory_region(0, size, BOOT_MEM_RAM);
 }
 
+static unsigned long __init get_board_mach_type(const void *fdt)
+{
+	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4780"))
+		return MACH_INGENIC_JZ4780;
+	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4770"))
+		return MACH_INGENIC_JZ4770;
+
+	return MACH_INGENIC_JZ4740;
+}
+
 void __init plat_mem_setup(void)
 {
 	int offset;
@@ -63,6 +73,8 @@ void __init plat_mem_setup(void)
 	offset = fdt_path_offset(__dtb_start, "/memory");
 	if (offset < 0)
 		jz4740_detect_mem();
+
+	mips_machtype = get_board_mach_type(__dtb_start);
 }
 
 void __init device_tree_init(void)
@@ -75,10 +87,14 @@ void __init device_tree_init(void)
 
 const char *get_system_type(void)
 {
-	if (IS_ENABLED(CONFIG_MACH_JZ4780))
+	switch (mips_machtype) {
+	case MACH_INGENIC_JZ4780:
 		return "JZ4780";
-
-	return "JZ4740";
+	case MACH_INGENIC_JZ4770:
+		return "JZ4770";
+	default:
+		return "JZ4740";
+	}
 }
 
 void __init arch_init_irq(void)
-- 
2.11.0

  parent reply	other threads:[~2018-01-16 15:48 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-02 15:08 [PATCH v5 01/15] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 02/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 03/15] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 04/15] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 05/15] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2018-01-05 16:34   ` Rob Herring
2018-01-02 15:08 ` [PATCH v5 06/15] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 07/15] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2018-01-02 17:05   ` Mathieu Malaterre
2018-01-02 15:08 ` [PATCH v5 08/15] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2018-01-02 15:58   ` PrasannaKumar Muralidharan
2018-01-02 15:08 ` [PATCH v5 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2018-01-02 15:59   ` PrasannaKumar Muralidharan
2018-01-02 15:08 ` [PATCH v5 10/15] MIPS: ingenic: Add machine info for supported boards Paul Cercueil
2018-01-02 16:02   ` PrasannaKumar Muralidharan
2018-01-02 16:32     ` Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 11/15] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2018-01-02 16:09   ` PrasannaKumar Muralidharan
2018-01-02 15:08 ` [PATCH v5 12/15] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers Paul Cercueil
2018-01-02 16:45   ` PrasannaKumar Muralidharan
2018-01-05 18:03     ` Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 14/15] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 15/15] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2018-01-02 17:04   ` Mathieu Malaterre
2018-01-05 18:24 ` [PATCH v6 00/15] JZ4770 SoC support Paul Cercueil
2018-01-05 18:24   ` [PATCH v6 01/15] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2018-01-16 15:47     ` [PATCH v7 00/14] JZ4770 and GCW0 patchset Paul Cercueil
2018-01-16 15:47       ` [PATCH v7 01/14] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2018-01-16 15:47       ` [PATCH v7 02/14] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2018-01-16 15:47       ` [PATCH v7 03/14] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2018-01-16 15:47       ` [PATCH v7 04/14] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2018-01-16 15:47       ` [PATCH v7 05/14] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2018-01-16 15:47       ` [PATCH v7 06/14] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2018-01-16 15:47       ` [PATCH v7 07/14] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2018-01-16 15:47       ` [PATCH v7 08/14] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2018-01-16 15:47       ` [PATCH v7 09/14] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2018-01-16 15:48       ` Paul Cercueil [this message]
2018-01-16 22:06         ` [PATCH v7 10/14] MIPS: ingenic: Detect machtype from SoC compatible string James Hogan
2018-01-16 15:48       ` [PATCH v7 11/14] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2018-01-17 21:28         ` James Hogan
2018-01-18 17:14           ` Paul Cercueil
2018-01-18 20:30             ` James Hogan
2018-01-16 15:48       ` [PATCH v7 12/14] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2018-01-16 15:48       ` [PATCH v7 13/14] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2018-01-16 15:48       ` [PATCH v7 14/14] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2018-02-01 15:31       ` [PATCH v7 00/14] JZ4770 and GCW0 patchset James Hogan
2018-01-05 18:25   ` [PATCH v6 02/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2018-01-05 18:25   ` [PATCH v6 03/15] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2018-01-05 18:25   ` [PATCH v6 04/15] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2018-01-05 18:25   ` [PATCH v6 05/15] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2018-01-05 18:25   ` [PATCH v6 06/15] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2018-01-10 21:37     ` James Hogan
2018-01-05 18:25   ` [PATCH v6 07/15] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2018-01-05 18:25   ` [PATCH v6 08/15] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2018-01-10 22:16     ` James Hogan
2018-01-05 18:25   ` [PATCH v6 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2018-01-10 22:19     ` James Hogan
2018-01-05 18:25   ` [PATCH v6 10/15] MIPS: ingenic: Detect machtype from SoC compatible string Paul Cercueil
2018-01-10 22:27     ` James Hogan
2018-01-16 14:06       ` Paul Cercueil
2018-01-05 18:25   ` [PATCH v6 11/15] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2018-01-10 22:42     ` James Hogan
2018-01-05 18:25   ` [PATCH v6 12/15] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2018-01-10 22:52     ` James Hogan
2018-01-05 18:25   ` [PATCH v6 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers Paul Cercueil
2018-01-10 23:20     ` James Hogan
2018-01-16 14:10       ` Paul Cercueil
2018-01-05 18:25   ` [PATCH v6 14/15] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2018-01-05 18:25   ` [PATCH v6 15/15] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2018-01-07 16:18     ` Philippe Ombredanne
2018-01-10 22:59       ` Paul Cercueil
2018-01-23 10:31         ` Philippe Ombredanne

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180116154804.21150-11-paul@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=jhogan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=maarten@treewalker.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®