From: Paul Cercueil <paul@crapouillou.net>
To: Ralf Baechle <ralf@linux-mips.org>, James Hogan <jhogan@kernel.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>,
linux-kernel@vger.kernel.org, linux-mips@linux-mips.org,
Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v7 11/14] MIPS: ingenic: Initial JZ4770 support
Date: Tue, 16 Jan 2018 16:48:01 +0100 [thread overview]
Message-ID: <20180116154804.21150-12-paul@crapouillou.net> (raw)
In-Reply-To: <20180116154804.21150-1-paul@crapouillou.net>
Provide just enough bits (clocks, clocksource, uart) to allow a kernel
to boot on the JZ4770 SoC to a initramfs userspace.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
---
arch/mips/boot/dts/ingenic/jz4770.dtsi | 212 +++++++++++++++++++++++++++++++++
arch/mips/jz4740/Kconfig | 6 +
arch/mips/jz4740/time.c | 2 +-
3 files changed, 219 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/boot/dts/ingenic/jz4770.dtsi
v2: No change
v3: No change
v4: No change
v5: Use SPDX license identifier
v6: No change
v7: No change
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
new file mode 100644
index 000000000000..7c2804f3f5f1
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/jz4770-cgu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,jz4770";
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4770-intc";
+ reg = <0x10001000 0x40>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ osc32k: osc32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: jz4770-cgu@10000000 {
+ compatible = "ingenic,jz4770-cgu";
+ reg = <0x10000000 0x100>;
+
+ clocks = <&ext>, <&osc32k>;
+ clock-names = "ext", "osc32k";
+
+ #clock-cells = <1>;
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,jz4770-pinctrl";
+ reg = <0x10010000 0x600>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+
+ gpe: gpio@4 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 128 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <13>;
+ };
+
+ gpf: gpio@5 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <5>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 160 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+ };
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,jz4770-uart";
+ reg = <0x10030000 0x100>;
+
+ clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ interrupt-parent = <&intc>;
+ interrupts = <5>;
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,jz4770-uart";
+ reg = <0x10031000 0x100>;
+
+ clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ interrupt-parent = <&intc>;
+ interrupts = <4>;
+
+ status = "disabled";
+ };
+
+ uart2: serial@10032000 {
+ compatible = "ingenic,jz4770-uart";
+ reg = <0x10032000 0x100>;
+
+ clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
+ clock-names = "baud", "module";
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+
+ status = "disabled";
+ };
+
+ uart3: serial@10033000 {
+ compatible = "ingenic,jz4770-uart";
+ reg = <0x10033000 0x100>;
+
+ clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
+ clock-names = "baud", "module";
+
+ interrupt-parent = <&intc>;
+ interrupts = <2>;
+
+ status = "disabled";
+ };
+
+ uhc: uhc@13430000 {
+ compatible = "generic-ohci";
+ reg = <0x13430000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
+ assigned-clocks = <&cgu JZ4770_CLK_UHC>;
+ assigned-clock-rates = <48000000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
+
+ status = "disabled";
+ };
+};
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 643af2012e14..29a9361a2b77 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -18,6 +18,12 @@ config MACH_JZ4740
bool
select SYS_HAS_CPU_MIPS32_R1
+config MACH_JZ4770
+ bool
+ select MIPS_CPU_SCACHE
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_HIGHMEM
+
config MACH_JZ4780
bool
select MIPS_CPU_SCACHE
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index bb1ad5119da4..2ca9160f642a 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = {
#ifdef CONFIG_MACH_JZ4740
.irq = JZ4740_IRQ_TCU0,
#endif
-#ifdef CONFIG_MACH_JZ4780
+#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
.irq = JZ4780_IRQ_TCU2,
#endif
};
--
2.11.0
next prev parent reply other threads:[~2018-01-16 15:49 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-02 15:08 [PATCH v5 01/15] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 02/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 03/15] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 04/15] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 05/15] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2018-01-05 16:34 ` Rob Herring
2018-01-02 15:08 ` [PATCH v5 06/15] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 07/15] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2018-01-02 17:05 ` Mathieu Malaterre
2018-01-02 15:08 ` [PATCH v5 08/15] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2018-01-02 15:58 ` PrasannaKumar Muralidharan
2018-01-02 15:08 ` [PATCH v5 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2018-01-02 15:59 ` PrasannaKumar Muralidharan
2018-01-02 15:08 ` [PATCH v5 10/15] MIPS: ingenic: Add machine info for supported boards Paul Cercueil
2018-01-02 16:02 ` PrasannaKumar Muralidharan
2018-01-02 16:32 ` Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 11/15] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2018-01-02 16:09 ` PrasannaKumar Muralidharan
2018-01-02 15:08 ` [PATCH v5 12/15] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers Paul Cercueil
2018-01-02 16:45 ` PrasannaKumar Muralidharan
2018-01-05 18:03 ` Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 14/15] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 15/15] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2018-01-02 17:04 ` Mathieu Malaterre
2018-01-05 18:24 ` [PATCH v6 00/15] JZ4770 SoC support Paul Cercueil
2018-01-05 18:24 ` [PATCH v6 01/15] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 00/14] JZ4770 and GCW0 patchset Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 01/14] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 02/14] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 03/14] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 04/14] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 05/14] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 06/14] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 07/14] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 08/14] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 09/14] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2018-01-16 15:48 ` [PATCH v7 10/14] MIPS: ingenic: Detect machtype from SoC compatible string Paul Cercueil
2018-01-16 22:06 ` James Hogan
2018-01-16 15:48 ` Paul Cercueil [this message]
2018-01-17 21:28 ` [PATCH v7 11/14] MIPS: ingenic: Initial JZ4770 support James Hogan
2018-01-18 17:14 ` Paul Cercueil
2018-01-18 20:30 ` James Hogan
2018-01-16 15:48 ` [PATCH v7 12/14] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2018-01-16 15:48 ` [PATCH v7 13/14] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2018-01-16 15:48 ` [PATCH v7 14/14] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2018-02-01 15:31 ` [PATCH v7 00/14] JZ4770 and GCW0 patchset James Hogan
2018-01-05 18:25 ` [PATCH v6 02/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 03/15] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 04/15] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 05/15] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 06/15] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2018-01-10 21:37 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 07/15] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 08/15] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2018-01-10 22:16 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2018-01-10 22:19 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 10/15] MIPS: ingenic: Detect machtype from SoC compatible string Paul Cercueil
2018-01-10 22:27 ` James Hogan
2018-01-16 14:06 ` Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 11/15] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2018-01-10 22:42 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 12/15] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2018-01-10 22:52 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers Paul Cercueil
2018-01-10 23:20 ` James Hogan
2018-01-16 14:10 ` Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 14/15] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 15/15] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2018-01-07 16:18 ` Philippe Ombredanne
2018-01-10 22:59 ` Paul Cercueil
2018-01-23 10:31 ` Philippe Ombredanne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180116154804.21150-12-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=jhogan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=maarten@treewalker.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®