From: Rob Herring <robh@kernel.org>
To: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
Cc: broonie@kernel.org, alsa-devel@alsa-project.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
wakasugi.jb@om.asahi-kasei.co.jp, shengjiu.wang@nxp.com,
daniel.baluta@nxp.com, mihai.serban@gmail.com, linux-imx@nxp.com,
Mihai Serban <mihai.serban@nxp.com>
Subject: Re: [PATCH] ASoC: codecs: Add support for AK4458 DAC driver
Date: Mon, 5 Feb 2018 00:08:34 -0600 [thread overview]
Message-ID: <20180205060834.7fwbqnyzrfze4cli@rob-hp-laptop> (raw)
In-Reply-To: <1517404809-25250-1-git-send-email-cosmin.samoila@nxp.com>
On Wed, Jan 31, 2018 at 03:20:09PM +0200, Cosmin-Gabriel Samoila wrote:
> The AK4458 is a 32-bit 8ch Premium DAC that corresponds
> to a 768kHz PCM input and an 11.2MHz DSD input at maximum.
> It supports I2S, DSD and TDM modes with 24 or 32 bit MSB
> or 16, 24, 32 LSB formats. Its datasheet is available here:
> https://www.akm.com/akm/en/file/datasheet/AK4458VN.pdf
>
> Signed-off-by: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp>
> Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> Signed-off-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
> ---
> Documentation/devicetree/bindings/sound/ak4458.txt | 23 +
Separate patch please.
> sound/soc/codecs/Kconfig | 18 +
> sound/soc/codecs/Makefile | 6 +
> sound/soc/codecs/ak4458-i2c.c | 79 ++
> sound/soc/codecs/ak4458-spi.c | 61 ++
> sound/soc/codecs/ak4458.c | 1132 ++++++++++++++++++++
> sound/soc/codecs/ak4458.h | 127 +++
> 7 files changed, 1446 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/ak4458.txt
> create mode 100644 sound/soc/codecs/ak4458-i2c.c
> create mode 100644 sound/soc/codecs/ak4458-spi.c
> create mode 100644 sound/soc/codecs/ak4458.c
> create mode 100644 sound/soc/codecs/ak4458.h
>
> diff --git a/Documentation/devicetree/bindings/sound/ak4458.txt b/Documentation/devicetree/bindings/sound/ak4458.txt
> new file mode 100644
> index 0000000..b9e6eb3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/ak4458.txt
> @@ -0,0 +1,23 @@
> +AK4458 audio DAC
> +
> +This device supports both I2C and SPI modes.
> +
> +Required properties:
> +
> +- compatible : "asahi-kasei,ak4458"
> +- reg : The I2C address of the device for I2C, the chip select number for SPI.
> +- asahi-kasei,pdn-gpios: A GPIO specifier for the GPIO controlling
> + the power down & reset pin.
reset-gpios like the Asahi Kasei ADC under review.
> +- asahi-kasei,mute-gpios: A GPIO specifier for the GPIO controlling
> + the soft mute pin.
State the active state.
> +
> +Example:
> +
> +&i2c {
> + ak4458: ak4458@10 {
dac@10
> + compatible = "asahi-kasei,ak4458";
> + reg = <0x10>;
> + asahi-kasei,pdn-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>
> + asahi-kasei,mute-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>
> + };
> +};
next prev parent reply other threads:[~2018-02-05 6:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-31 13:20 Cosmin-Gabriel Samoila
2018-01-31 17:03 ` Mark Brown
2018-02-09 10:22 ` Cosmin Samoila
2018-02-09 15:47 ` Mark Brown
2018-02-13 9:22 ` Cosmin Samoila
2018-02-13 11:55 ` Mark Brown
2018-02-05 6:08 ` Rob Herring [this message]
2018-02-12 12:47 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180205060834.7fwbqnyzrfze4cli@rob-hp-laptop \
--to=robh@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=cosmin.samoila@nxp.com \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mihai.serban@gmail.com \
--cc=mihai.serban@nxp.com \
--cc=shengjiu.wang@nxp.com \
--cc=wakasugi.jb@om.asahi-kasei.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®