From: Joel Stanley <joel@jms.id.au>
To: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Andrew Jeffery <andrew@aj.id.au>, Cyril Bur <cyrilbur@gmail.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Ryan Chen <ryan_chen@aspeedtech.com>,
Lei YU <mine260309@gmail.com>
Subject: [PATCH 2/3] misc: aspeed-lpc: Request and enable LPC clock
Date: Mon, 12 Feb 2018 17:38:46 +1030 [thread overview]
Message-ID: <20180212070847.32387-3-joel@jms.id.au> (raw)
In-Reply-To: <20180212070847.32387-1-joel@jms.id.au>
The LPC device needs to ensure it's clock is enabled before it can do
anything.
In the past the clock was enabled and left running by u-boot, however
Linux now has an upstream clock driver that disables unused clocks.
Tested-by: Lei YU <mine260309@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/misc/aspeed-lpc-ctrl.c | 26 +++++++++++++++++++++++---
1 file changed, 23 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/aspeed-lpc-ctrl.c b/drivers/misc/aspeed-lpc-ctrl.c
index b5439643f54b..1827b7aa6674 100644
--- a/drivers/misc/aspeed-lpc-ctrl.c
+++ b/drivers/misc/aspeed-lpc-ctrl.c
@@ -7,6 +7,7 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/clk.h>
#include <linux/mfd/syscon.h>
#include <linux/miscdevice.h>
#include <linux/mm.h>
@@ -26,6 +27,7 @@
struct aspeed_lpc_ctrl {
struct miscdevice miscdev;
struct regmap *regmap;
+ struct clk *clk;
phys_addr_t mem_base;
resource_size_t mem_size;
u32 pnor_size;
@@ -221,16 +223,33 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
return -ENODEV;
}
+ lpc_ctrl->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(lpc_ctrl->clk)) {
+ dev_err(dev, "couldn't get clock\n");
+ return PTR_ERR(lpc_ctrl->clk);
+ }
+ rc = clk_prepare_enable(lpc_ctrl->clk);
+ if (rc) {
+ dev_err(dev, "couldn't enable clock\n");
+ return rc;
+ }
+
lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
lpc_ctrl->miscdev.name = DEVICE_NAME;
lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops;
lpc_ctrl->miscdev.parent = dev;
rc = misc_register(&lpc_ctrl->miscdev);
- if (rc)
+ if (rc) {
dev_err(dev, "Unable to register device\n");
- else
- dev_info(dev, "Loaded at %pr\n", &resm);
+ goto err;
+ }
+
+ dev_info(dev, "Loaded at %pr\n", &resm);
+
+ return 0;
+err:
+ clk_disable_unprepare(lpc_ctrl->clk);
return rc;
}
@@ -239,6 +258,7 @@ static int aspeed_lpc_ctrl_remove(struct platform_device *pdev)
struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev);
misc_deregister(&lpc_ctrl->miscdev);
+ clk_disable_unprepare(lpc_ctrl->clk);
return 0;
}
--
2.15.1
next prev parent reply other threads:[~2018-02-12 7:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-12 7:08 [PATCH 0/3] misc: aspeed-lpc-ctrl fixes Joel Stanley
2018-02-12 7:08 ` [PATCH 1/3] dt-bindings: aspeed-lpc: Document LPC Host Interface Controller Joel Stanley
2018-02-16 5:04 ` Andrew Jeffery
2018-02-19 0:10 ` Rob Herring
2018-02-12 7:08 ` Joel Stanley [this message]
2018-02-12 7:08 ` [PATCH 3/3] misc: aspeed-lpc-ctrl: Enable FWH and A2H bridge cycles Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180212070847.32387-3-joel@jms.id.au \
--to=joel@jms.id.au \
--cc=andrew@aj.id.au \
--cc=arnd@arndb.de \
--cc=benh@kernel.crashing.org \
--cc=cyrilbur@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mine260309@gmail.com \
--cc=robh+dt@kernel.org \
--cc=ryan_chen@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®