mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ioana Radulescu <ruxandra.radulescu@nxp.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH 5/9] staging: fsl-dpaa2/eth: Add DPNI version check
Date: Fri, 23 Mar 2018 08:44:09 -0500	[thread overview]
Message-ID: <20180323134413.1532-6-ruxandra.radulescu@nxp.com> (raw)
In-Reply-To: <20180323134413.1532-1-ruxandra.radulescu@nxp.com>

The DPAA2 Ethernet driver assumes the DPNI objects that it
uses to build network interfaces have a minimum supported
API version, but until now it did nothing to enforce this
requirement.

Add a check at probe time to make sure the DPNI object is
compatible with the set of MC commands we intend to use
on it.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
---
 drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c     | 15 +++++++++++++++
 drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h     | 10 ++++++++++
 drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c | 11 ++---------
 3 files changed, 27 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
index 9fb88f2..f58c85a 100644
--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
+++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c
@@ -1846,6 +1846,21 @@ static int setup_dpni(struct fsl_mc_device *ls_dev)
 		return err;
 	}
 
+	/* Check if we can work with this DPNI object */
+	err = dpni_get_api_version(priv->mc_io, 0, &priv->dpni_ver_major,
+				   &priv->dpni_ver_minor);
+	if (err) {
+		dev_err(dev, "dpni_get_api_version() failed\n");
+		goto close;
+	}
+	if (dpaa2_eth_cmp_dpni_ver(priv, DPNI_VER_MAJOR, DPNI_VER_MINOR) < 0) {
+		dev_err(dev, "DPNI version %u.%u not supported, need >= %u.%u\n",
+			priv->dpni_ver_major, priv->dpni_ver_minor,
+			DPNI_VER_MAJOR, DPNI_VER_MINOR);
+		err = -ENOTSUPP;
+		goto close;
+	}
+
 	ls_dev->mc_io = priv->mc_io;
 	ls_dev->mc_handle = priv->mc_token;
 
diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
index c4816e6..5ac014f 100644
--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
+++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
@@ -311,6 +311,8 @@ struct dpaa2_eth_priv {
 	struct dpaa2_eth_channel *channel[DPAA2_ETH_MAX_DPCONS];
 
 	struct dpni_attr dpni_attrs;
+	u16 dpni_ver_major;
+	u16 dpni_ver_minor;
 	u16 tx_data_offset;
 
 	struct fsl_mc_device *dpbp_dev;
@@ -354,6 +356,14 @@ struct dpaa2_eth_priv {
 extern const struct ethtool_ops dpaa2_ethtool_ops;
 extern const char dpaa2_eth_drv_version[];
 
+static inline int dpaa2_eth_cmp_dpni_ver(struct dpaa2_eth_priv *priv,
+					 u16 ver_major, u16 ver_minor)
+{
+	if (priv->dpni_ver_major == ver_major)
+		return priv->dpni_ver_minor - ver_minor;
+	return priv->dpni_ver_major - ver_major;
+}
+
 /* Hardware only sees DPAA2_ETH_RX_BUF_SIZE, but the skb built around
  * the buffer also needs space for its shared info struct, and we need
  * to allocate enough to accommodate hardware alignment restrictions
diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c
index 070a3f2..dfbfa94 100644
--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c
+++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c
@@ -78,20 +78,13 @@ static void dpaa2_eth_get_drvinfo(struct net_device *net_dev,
 				  struct ethtool_drvinfo *drvinfo)
 {
 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-	u16 fw_major, fw_minor;
-	int err;
 
 	strlcpy(drvinfo->driver, KBUILD_MODNAME, sizeof(drvinfo->driver));
 	strlcpy(drvinfo->version, dpaa2_eth_drv_version,
 		sizeof(drvinfo->version));
 
-	err =  dpni_get_api_version(priv->mc_io, 0, &fw_major, &fw_minor);
-	if (!err)
-		snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
-			 "%u.%u", fw_major, fw_minor);
-	else
-		strlcpy(drvinfo->fw_version, "N/A",
-			sizeof(drvinfo->fw_version));
+	snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
+		 "%u.%u", priv->dpni_ver_major, priv->dpni_ver_minor);
 
 	strlcpy(drvinfo->bus_info, dev_name(net_dev->dev.parent->parent),
 		sizeof(drvinfo->bus_info));
-- 
2.7.4

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

  parent reply	other threads:[~2018-03-23 13:44 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-23 13:44 [PATCH 0/9] staging: fsl-dpaa2/eth: Cleanup Ioana Radulescu
2018-03-23 13:44 ` [PATCH 1/9] staging: fsl-dpaa2/eth: Use generic irq handler Ioana Radulescu
2018-03-23 13:44 ` [PATCH 2/9] staging: fsl-dpaa2/eth: Move print message Ioana Radulescu
2018-03-23 15:01   ` Greg KH
2018-03-23 15:03     ` Ruxandra Ioana Ciocoi Radulescu
2018-03-23 15:06       ` Greg KH
2018-03-23 13:44 ` [PATCH 3/9] staging: fsl-dpaa2/eth: Remove unused field Ioana Radulescu
2018-03-23 13:44 ` [PATCH 4/9] staging: fsl-dpaa2/eth: Remove packed attribute Ioana Radulescu
2018-03-23 13:44 ` Ioana Radulescu [this message]
2018-03-23 13:44 ` [PATCH 6/9] staging: fsl-dpaa2/eth: Change link settings on the fly Ioana Radulescu
2018-03-23 13:44 ` [PATCH 7/9] staging: fsl-dpaa2/eth: Cleanup TX frame freeing code Ioana Radulescu
2018-03-23 13:44 ` [PATCH 8/9] staging: fsl-dpaa2/eth: Fix SGT allocation Ioana Radulescu
2018-03-23 13:44 ` [PATCH 9/9] staging: fsl-dpaa2/eth: Change max number of Tx queues Ioana Radulescu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180323134413.1532-6-ruxandra.radulescu@nxp.com \
    --to=ruxandra.radulescu@nxp.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®