[PATCH] thermal: exynos: Reduce severity of too early temperature read

[PATCH] thermal: exynos: Reduce severity of too early temperature read

[Krzysztof Kozlowski]

Thermal core tries to read temperature during sensor registering in
thermal_zone_of_sensor_register().  In that time Exynos TMU driver and
hardware are not yet initialized.  Commit 0eb875d88aaa ("thermal:
exynos: Reading temperature makes sense only when TMU is turned on")
added a boolean flag to prevent reading bogus temperature in such
case but it exposed warning message during boot:
	[    3.864913] thermal thermal_zone0: failed to read out thermal zone (-22)

Return EAGAIN in such case to skip omitting such message because it
might mislead user.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/thermal/samsung/exynos_tmu.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 3b20309789e3..c24969d740d1 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -666,8 +666,14 @@ static int exynos_get_temp(void *p, int *temp)
 	struct exynos_tmu_data *data = p;
 	int value, ret = 0;
 
-	if (!data || !data->tmu_read || !data->enabled)
+	if (!data || !data->tmu_read)
 		return -EINVAL;
+	else if (!data->enabled)
+		/*
+		 * Called too early, probably
+		 * from thermal_zone_of_sensor_register().
+		 */
+		return -EAGAIN;
 
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
-- 
2.14.1

Re: [PATCH] thermal: exynos: Reduce severity of too early temperature read

[Bartlomiej Zolnierkiewicz]

On Sunday, May 13, 2018 07:54:02 PM Krzysztof Kozlowski wrote:
> Thermal core tries to read temperature during sensor registering in
> thermal_zone_of_sensor_register().  In that time Exynos TMU driver and
> hardware are not yet initialized.  Commit 0eb875d88aaa ("thermal:
> exynos: Reading temperature makes sense only when TMU is turned on")
> added a boolean flag to prevent reading bogus temperature in such
> case but it exposed warning message during boot:
> 	[    3.864913] thermal thermal_zone0: failed to read out thermal zone (-22)
> 
> Return EAGAIN in such case to skip omitting such message because it
> might mislead user.

Hi Krzysztof,

I've fixed this in generic way a month ago:

	https://lkml.org/lkml/2018/4/10/376

(there has been not much feedback on it yet)

However since my patchset is not v4.17 material:

> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Eduardo, please queue it for v4.17 if possible, thanks.

> ---
>  drivers/thermal/samsung/exynos_tmu.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 3b20309789e3..c24969d740d1 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -666,8 +666,14 @@ static int exynos_get_temp(void *p, int *temp)
>  	struct exynos_tmu_data *data = p;
>  	int value, ret = 0;
>  
> -	if (!data || !data->tmu_read || !data->enabled)
> +	if (!data || !data->tmu_read)
>  		return -EINVAL;
> +	else if (!data->enabled)
> +		/*
> +		 * Called too early, probably
> +		 * from thermal_zone_of_sensor_register().
> +		 */
> +		return -EAGAIN;
>  
>  	mutex_lock(&data->lock);
>  	clk_enable(data->clk);

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics