From: Joel Fernandes <joel@joelfernandes.org>
To: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: linux-kernel@vger.kernel.org,
Viresh Kumar <viresh.kumar@linaro.org>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
Peter Zijlstra <peterz@infradead.org>,
Ingo Molnar <mingo@redhat.com>,
Juri Lelli <juri.lelli@redhat.com>,
Luca Abeni <luca.abeni@santannapisa.it>,
Todd Kjos <tkjos@google.com>,
claudio@evidence.eu.com, kernel-team@android.com,
linux-pm@vger.kernel.org
Subject: Re: [PATCH v2] schedutil: Allow cpufreq requests to be made even when kthread kicked
Date: Mon, 21 May 2018 11:05:57 -0700 [thread overview]
Message-ID: <20180521180557.GA40541@joelaf.mtv.corp.google.com> (raw)
In-Reply-To: <20180521105055.GQ30654@e110439-lin>
On Mon, May 21, 2018 at 11:50:55AM +0100, Patrick Bellasi wrote:
> On 18-May 11:55, Joel Fernandes (Google.) wrote:
> > From: "Joel Fernandes (Google)" <joel@joelfernandes.org>
> >
> > Currently there is a chance of a schedutil cpufreq update request to be
> > dropped if there is a pending update request. This pending request can
> > be delayed if there is a scheduling delay of the irq_work and the wake
> > up of the schedutil governor kthread.
> >
> > A very bad scenario is when a schedutil request was already just made,
> > such as to reduce the CPU frequency, then a newer request to increase
> > CPU frequency (even sched deadline urgent frequency increase requests)
> > can be dropped, even though the rate limits suggest that its Ok to
> > process a request. This is because of the way the work_in_progress flag
> > is used.
> >
> > This patch improves the situation by allowing new requests to happen
> > even though the old one is still being processed. Note that in this
> > approach, if an irq_work was already issued, we just update next_freq
> > and don't bother to queue another request so there's no extra work being
> > done to make this happen.
>
> Maybe I'm missing something but... is not this patch just a partial
> mitigation of the issue you descrive above?
>
> If a DL freq increase is queued, with this patch we store the request
> but we don't actually increase the frequency until the next schedutil
> update, which can be one tick away... isn't it?
>
> If that's the case, maybe something like the following can complete
> the cure?
>
> ---8<---
> #define SUGOV_FREQ_NONE 0
>
> static unsigned int sugov_work_update(struct sugov_policy *sg_policy,
> unsigned int prev_freq)
> {
> unsigned long irq_flags;
> bool update_freq = true;
> unsigned int next_freq;
>
> /*
> * Hold sg_policy->update_lock shortly to handle the case where:
> * incase sg_policy->next_freq is read here, and then updated by
> * sugov_update_shared just before work_in_progress is set to false
> * here, we may miss queueing the new update.
> *
> * Note: If a work was queued after the update_lock is released,
> * sugov_work will just be called again by kthread_work code; and the
> * request will be proceed before the sugov thread sleeps.
> */
> raw_spin_lock_irqsave(&sg_policy->update_lock, irq_flags);
> next_freq = sg_policy->next_freq;
> sg_policy->work_in_progress = false;
> if (prev_freq == next_freq)
> update_freq = false;
About this patch on top of mine, I believe this check is already being done
by sugov_update_commit? :
static void sugov_update_commit(struct sugov_policy *sg_policy, u64 time,
unsigned int next_freq)
{
struct cpufreq_policy *policy = sg_policy->policy;
if (sg_policy->next_freq == next_freq)
return;
sg_policy->next_freq = next_freq;
sg_policy->last_freq_update_time = time;
----
thanks,
- Joel
next prev parent reply other threads:[~2018-05-21 18:06 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-18 18:55 Joel Fernandes (Google.)
2018-05-18 21:13 ` Saravana Kannan
2018-05-18 21:17 ` Rafael J. Wysocki
2018-05-21 5:14 ` Viresh Kumar
2018-05-21 8:29 ` Rafael J. Wysocki
2018-05-21 9:57 ` Juri Lelli
2018-05-21 16:13 ` Joel Fernandes
2018-05-22 10:02 ` Rafael J. Wysocki
2018-05-22 11:26 ` Rafael J. Wysocki
2018-05-22 15:30 ` Rafael J. Wysocki
2018-05-22 17:07 ` Rafael J. Wysocki
2018-05-21 10:50 ` Patrick Bellasi
2018-05-21 15:49 ` Joel Fernandes
2018-05-21 17:00 ` Patrick Bellasi
2018-05-21 17:20 ` Joel Fernandes
2018-05-21 17:41 ` Patrick Bellasi
2018-05-22 10:23 ` Viresh Kumar
2018-05-22 10:38 ` Patrick Bellasi
2018-05-21 18:05 ` Joel Fernandes [this message]
2018-05-22 10:26 ` Patrick Bellasi
2018-05-22 10:34 ` Viresh Kumar
2018-05-22 10:50 ` Viresh Kumar
2018-05-22 10:50 ` Rafael J. Wysocki
2018-05-22 10:54 ` Viresh Kumar
2018-05-22 11:31 ` Rafael J. Wysocki
2018-05-22 11:38 ` Viresh Kumar
2018-05-22 11:42 ` Rafael J. Wysocki
2018-05-22 12:22 ` Rafael J. Wysocki
2018-05-22 15:27 ` Rafael J. Wysocki
2018-05-22 21:41 ` Joel Fernandes
2018-05-22 21:52 ` Rafael J. Wysocki
2018-05-22 22:28 ` Joel Fernandes
2018-05-22 10:51 ` Patrick Bellasi
2018-05-22 10:56 ` Viresh Kumar
2018-05-22 22:09 ` Joel Fernandes
2018-05-23 8:18 ` Rafael J. Wysocki
2018-05-23 9:01 ` Viresh Kumar
2018-05-23 9:42 ` Joel Fernandes
2018-05-23 10:06 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180521180557.GA40541@joelaf.mtv.corp.google.com \
--to=joel@joelfernandes.org \
--cc=claudio@evidence.eu.com \
--cc=juri.lelli@redhat.com \
--cc=kernel-team@android.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=luca.abeni@santannapisa.it \
--cc=mingo@redhat.com \
--cc=patrick.bellasi@arm.com \
--cc=peterz@infradead.org \
--cc=rafael.j.wysocki@intel.com \
--cc=tkjos@google.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®