[PATCH 0/7] vmw_balloon: addressing bugs and issues

[PATCH 0/7] vmw_balloon: addressing bugs and issues

[Nadav Amit]

This patch-set addresses minor issues and bugs in the VMware balloon
driver. Patches 3-7 address bugs that were not reported by customers,
but we would like to get them to 4.18 if possible.

We will send separately later a patch-set with new features to be set on
top of this set. 

Nadav Amit (7):
  vmw_balloon: update copyright message
  vmw_balloon: update maintainers list
  vmw_balloon: fix inflation of 64-bit GFNs
  vmw_balloon: do not use 2MB without batching
  vmw_balloon: VMCI_DOORBELL_SET does not check status
  vmw_balloon: fix VMCI use when balloon built into kernel
  vmw_balloon: remove inflation rate limiting

 MAINTAINERS                |   2 +-
 drivers/misc/vmw_balloon.c | 167 ++++++++++++-------------------------
 2 files changed, 56 insertions(+), 113 deletions(-)

-- 
2.17.0

[PATCH 1/7] vmw_balloon: update copyright message

[Nadav Amit]

Removing the paragraph about writing to the Free Software Foundation's
mailing address from the sample GPL notice according to checkpatch
request.

In addition, updating the year and adding a license tag.

Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
---
 drivers/misc/vmw_balloon.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index efd733472a35..1d50ed630d30 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -1,7 +1,7 @@
 /*
  * VMware Balloon driver.
  *
- * Copyright (C) 2000-2014, VMware, Inc. All Rights Reserved.
+ * Copyright (C) 2000-2018, VMware, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -13,9 +13,7 @@
  * NON INFRINGEMENT.  See the GNU General Public License for more
  * details.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ * SPDX-License-Identifier: GPL-2.0
  *
  * Maintained by:	Xavier Deguillard <xdeguillard@vmware.com>
  *			Philip Moltmann <moltmann@vmware.com>
-- 
2.17.0

Re: [PATCH 1/7] vmw_balloon: update copyright message

[Greg Kroah-Hartman]

On Wed, Jun 13, 2018 at 04:03:53AM -0700, Nadav Amit wrote:
> Removing the paragraph about writing to the Free Software Foundation's
> mailing address from the sample GPL notice according to checkpatch
> request.
> 
> In addition, updating the year and adding a license tag.
> 
> Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
> Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
> ---
>  drivers/misc/vmw_balloon.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
> index efd733472a35..1d50ed630d30 100644
> --- a/drivers/misc/vmw_balloon.c
> +++ b/drivers/misc/vmw_balloon.c
> @@ -1,7 +1,7 @@
>  /*
>   * VMware Balloon driver.
>   *
> - * Copyright (C) 2000-2014, VMware, Inc. All Rights Reserved.
> + * Copyright (C) 2000-2018, VMware, Inc. All Rights Reserved.
>   *
>   * This program is free software; you can redistribute it and/or modify it
>   * under the terms of the GNU General Public License as published by the
> @@ -13,9 +13,7 @@
>   * NON INFRINGEMENT.  See the GNU General Public License for more
>   * details.
>   *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
> + * SPDX-License-Identifier: GPL-2.0

This goes as the first line of the file, please see the documentation
files that describes how to do this properly.

Thanks,

greg k-h

Re: [PATCH 1/7] vmw_balloon: update copyright message

[Nadav Amit]

at 11:20 AM, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> On Wed, Jun 13, 2018 at 04:03:53AM -0700, Nadav Amit wrote:
>> Removing the paragraph about writing to the Free Software Foundation's
>> mailing address from the sample GPL notice according to checkpatch
>> request.
>> 
>> In addition, updating the year and adding a license tag.
>> 
>> Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
>> Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
>> ---
>> drivers/misc/vmw_balloon.c | 6 ++----
>> 1 file changed, 2 insertions(+), 4 deletions(-)
>> 
>> diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
>> index efd733472a35..1d50ed630d30 100644
>> --- a/drivers/misc/vmw_balloon.c
>> +++ b/drivers/misc/vmw_balloon.c
>> @@ -1,7 +1,7 @@
>> /*
>>  * VMware Balloon driver.
>>  *
>> - * Copyright (C) 2000-2014, VMware, Inc. All Rights Reserved.
>> + * Copyright (C) 2000-2018, VMware, Inc. All Rights Reserved.
>>  *
>>  * This program is free software; you can redistribute it and/or modify it
>>  * under the terms of the GNU General Public License as published by the
>> @@ -13,9 +13,7 @@
>>  * NON INFRINGEMENT.  See the GNU General Public License for more
>>  * details.
>>  *
>> - * You should have received a copy of the GNU General Public License
>> - * along with this program; if not, write to the Free Software
>> - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
>> + * SPDX-License-Identifier: GPL-2.0
> 
> This goes as the first line of the file, please see the documentation
> files that describes how to do this properly.

Of course. I was sure I fixed it... I will resend.

[PATCH 2/7] vmw_balloon: update maintainers list

[Nadav Amit]

Philip Moltman is no longer a maintainer of the VMware balloon. Setting
Nadav Amit as one instead.

Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
---
 MAINTAINERS                | 2 +-
 drivers/misc/vmw_balloon.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 5c374d97c967..78009d21293a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15136,7 +15136,7 @@ F:	include/linux/vme*
 
 VMWARE BALLOON DRIVER
 M:	Xavier Deguillard <xdeguillard@vmware.com>
-M:	Philip Moltmann <moltmann@vmware.com>
+M:	Nadav Amit <namit@vmware.com>
 M:	"VMware, Inc." <pv-drivers@vmware.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index 1d50ed630d30..a73b5d64403a 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -16,7 +16,7 @@
  * SPDX-License-Identifier: GPL-2.0
  *
  * Maintained by:	Xavier Deguillard <xdeguillard@vmware.com>
- *			Philip Moltmann <moltmann@vmware.com>
+ *			Nadav Amit <namit@vmware.com>
  */
 
 /*
-- 
2.17.0

[PATCH 3/7] vmw_balloon: fix inflation of 64-bit GFNs

[Nadav Amit]

When balloon batching is not supported by the hypervisor, the guest
frame number (GFN) must fit in 32-bit. However, due to a bug, this check
was mistakenly ignored. In practice, when total RAM is greater than
16TB, the balloon does not work currently, making this bug unlikely to
happen.

Fixes: ef0f8f112984 ("VMware balloon: partially inline
vmballoon_reserve_page.")

Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
---
 drivers/misc/vmw_balloon.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index a73b5d64403a..496607a9046a 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -448,7 +448,7 @@ static int vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn,
 
 	pfn32 = (u32)pfn;
 	if (pfn32 != pfn)
-		return -1;
+		return -EINVAL;
 
 	STATS_INC(b->stats.lock[false]);
 
@@ -458,7 +458,7 @@ static int vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn,
 
 	pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status);
 	STATS_INC(b->stats.lock_fail[false]);
-	return 1;
+	return -EIO;
 }
 
 static int vmballoon_send_batched_lock(struct vmballoon *b,
@@ -595,11 +595,12 @@ static int vmballoon_lock_page(struct vmballoon *b, unsigned int num_pages,
 
 	locked = vmballoon_send_lock_page(b, page_to_pfn(page), &hv_status,
 								target);
-	if (locked > 0) {
+	if (locked) {
 		STATS_INC(b->stats.refused_alloc[false]);
 
-		if (hv_status == VMW_BALLOON_ERROR_RESET ||
-				hv_status == VMW_BALLOON_ERROR_PPN_NOTNEEDED) {
+		if (locked == -EIO &&
+		    (hv_status == VMW_BALLOON_ERROR_RESET ||
+		     hv_status == VMW_BALLOON_ERROR_PPN_NOTNEEDED)) {
 			vmballoon_free_page(page, false);
 			return -EIO;
 		}
@@ -615,7 +616,7 @@ static int vmballoon_lock_page(struct vmballoon *b, unsigned int num_pages,
 		} else {
 			vmballoon_free_page(page, false);
 		}
-		return -EIO;
+		return locked;
 	}
 
 	/* track allocated page */
-- 
2.17.0

Re: [PATCH 3/7] vmw_balloon: fix inflation of 64-bit GFNs

[Greg Kroah-Hartman]

On Wed, Jun 13, 2018 at 04:03:55AM -0700, Nadav Amit wrote:
> When balloon batching is not supported by the hypervisor, the guest
> frame number (GFN) must fit in 32-bit. However, due to a bug, this check
> was mistakenly ignored. In practice, when total RAM is greater than
> 16TB, the balloon does not work currently, making this bug unlikely to
> happen.
> 
> Fixes: ef0f8f112984 ("VMware balloon: partially inline
> vmballoon_reserve_page.")
> 

Why have a bugfix as the 3rd patch of the series?  Please put it first,
so that it can get into Linus's tree sooner.

Also, no need to line-wrap this, and drop the blank line.

And finally, does this need to go to the stable kernels?  If so, please
add the correct line for that.

thanks,

greg k-h

Re: [PATCH 3/7] vmw_balloon: fix inflation of 64-bit GFNs

[Nadav Amit]

at 11:21 AM, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> On Wed, Jun 13, 2018 at 04:03:55AM -0700, Nadav Amit wrote:
>> When balloon batching is not supported by the hypervisor, the guest
>> frame number (GFN) must fit in 32-bit. However, due to a bug, this check
>> was mistakenly ignored. In practice, when total RAM is greater than
>> 16TB, the balloon does not work currently, making this bug unlikely to
>> happen.
>> 
>> Fixes: ef0f8f112984 ("VMware balloon: partially inline
>> vmballoon_reserve_page.")
> 
> Why have a bugfix as the 3rd patch of the series?  Please put it first,
> so that it can get into Linus's tree sooner.
> 
> Also, no need to line-wrap this, and drop the blank line.
> 
> And finally, does this need to go to the stable kernels?  If so, please
> add the correct line for that.

I will fix the message. Patches 3-7 deal with minor bugs, some of which have
been there since day one, so I didn’t put a “Fixes” tag.

I’ll follow your direction and put patches 1-2 at the end.

[PATCH 4/7] vmw_balloon: do not use 2MB without batching

[Nadav Amit]

If the hypervisor sets 2MB batching is on, while batching is cleared,
the balloon code breaks. In this case the legacy mechanism is used with
2MB page. The VM would report a 2MB page is ballooned, and the
hypervisor would only take the first 4KB.

While the hypervisor should not report such settings, make the code more
robust by not enabling 2MB support without batching.

Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
---
 drivers/misc/vmw_balloon.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index 496607a9046a..db3cf91a515d 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -339,7 +339,13 @@ static bool vmballoon_send_start(struct vmballoon *b, unsigned long req_caps)
 		success = false;
 	}
 
-	if (b->capabilities & VMW_BALLOON_BATCHED_2M_CMDS)
+	/*
+	 * 2MB pages are only supported with batching. If batching is for some
+	 * reason disabled, do not use 2MB pages, since otherwise the legacy
+	 * mechanism is used with 2MB pages, causing a failure.
+	 */
+	if ((b->capabilities & VMW_BALLOON_BATCHED_2M_CMDS) &&
+	    (b->capabilities & VMW_BALLOON_BATCHED_CMDS))
 		b->supported_page_sizes = 2;
 	else
 		b->supported_page_sizes = 1;
-- 
2.17.0

[PATCH 5/7] vmw_balloon: VMCI_DOORBELL_SET does not check status

[Nadav Amit]

When vmballoon_vmci_init() sets a doorbell using VMCI_DOORBELL_SET, for
some reason it does not consider the status and looks at the result.
However, the hypervisor does not update the result - it updates the
status.

Fixes: 48e3d668b790 ("VMware balloon: Enable notification via VMCI")

Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
---
 drivers/misc/vmw_balloon.c | 37 +++++++++++++++++++------------------
 1 file changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index db3cf91a515d..6e0b09b79fb5 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -1034,29 +1034,30 @@ static void vmballoon_vmci_cleanup(struct vmballoon *b)
  */
 static int vmballoon_vmci_init(struct vmballoon *b)
 {
-	int error = 0;
+	unsigned long error, dummy;
 
-	if ((b->capabilities & VMW_BALLOON_SIGNALLED_WAKEUP_CMD) != 0) {
-		error = vmci_doorbell_create(&b->vmci_doorbell,
-				VMCI_FLAG_DELAYED_CB,
-				VMCI_PRIVILEGE_FLAG_RESTRICTED,
-				vmballoon_doorbell, b);
-
-		if (error == VMCI_SUCCESS) {
-			VMWARE_BALLOON_CMD(VMCI_DOORBELL_SET,
-					b->vmci_doorbell.context,
-					b->vmci_doorbell.resource, error);
-			STATS_INC(b->stats.doorbell_set);
-		}
-	}
+	if ((b->capabilities & VMW_BALLOON_SIGNALLED_WAKEUP_CMD) == 0)
+		return 0;
 
-	if (error != 0) {
-		vmballoon_vmci_cleanup(b);
+	error = vmci_doorbell_create(&b->vmci_doorbell, VMCI_FLAG_DELAYED_CB,
+				     VMCI_PRIVILEGE_FLAG_RESTRICTED,
+				     vmballoon_doorbell, b);
 
-		return -EIO;
-	}
+	if (error != VMCI_SUCCESS)
+		goto fail;
+
+	error = VMWARE_BALLOON_CMD(VMCI_DOORBELL_SET, b->vmci_doorbell.context,
+				   b->vmci_doorbell.resource, dummy);
+
+	STATS_INC(b->stats.doorbell_set);
+
+	if (error != VMW_BALLOON_SUCCESS)
+		goto fail;
 
 	return 0;
+fail:
+	vmballoon_vmci_cleanup(b);
+	return -EIO;
 }
 
 /*
-- 
2.17.0

[PATCH 6/7] vmw_balloon: fix VMCI use when balloon built into kernel

[Nadav Amit]

Currently, when all modules, including VMCI and VMware balloon are built
into the kernel, the initialization of the balloon happens before the
VMCI is probed. As a result, the balloon fails to initialize the VMCI
doorbell, which it uses to get asynchronous requests for balloon size
changes.

The problem can be seen in the logs, in the form of the following
message:
	"vmw_balloon: failed to initialize vmci doorbell"

The driver would work correctly but slightly less efficiently, probing
for requests periodically. This patch changes the balloon to be
initialized using late_initcall() instead of module_init() to address
this issue. It does not address a situation in which VMCI is built as a
module and the balloon is built into the kernel.

Signed-off-by: Nadav Amit <namit@vmware.com>
---
 drivers/misc/vmw_balloon.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index 6e0b09b79fb5..e9502a56aa4b 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -1295,7 +1295,14 @@ static int __init vmballoon_init(void)
 
 	return 0;
 }
-module_init(vmballoon_init);
+
+/*
+ * Using late_initcall() instead of module_init() allows the balloon to use the
+ * VMCI doorbell even when the balloon is built into the kernel. Otherwise the
+ * VMCI is probed only after the balloon is initialized. If the balloon is used
+ * as a module, late_initcall() is equivalent to module_init().
+ */
+late_initcall(vmballoon_init);
 
 static void __exit vmballoon_exit(void)
 {
-- 
2.17.0

[PATCH 7/7] vmw_balloon: remove inflation rate limiting

[Nadav Amit]

Since commit 33d268ed0019 ("VMware balloon: Do not limit the amount of
frees and allocations in non-sleep mode."), the allocations are not
increased, and therefore balloon inflation rate limiting is in practice
broken.

While we can restore rate limiting, in practice we see that it can
result in adverse effect, as the hypervisor throttles down the VM if it
does not respond well enough, or alternatively causes it to perform very
poorly as the host swaps out the VM memory. Throttling the VM down can
even have a cascading effect, in which the VM reclaims memory even
slower and consequentially throttled down even further.

We therefore remove all the rate limiting mechanisms, including the slow
allocation cycles, as they are likely to do more harm than good.

Signed-off-by: Nadav Amit <namit@vmware.com>
---
 drivers/misc/vmw_balloon.c | 92 +++++---------------------------------
 1 file changed, 11 insertions(+), 81 deletions(-)

diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index e9502a56aa4b..150e7f0543fd 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -52,25 +52,6 @@ MODULE_ALIAS("dmi:*:svnVMware*:*");
 MODULE_ALIAS("vmware_vmmemctl");
 MODULE_LICENSE("GPL");
 
-/*
- * Various constants controlling rate of inflaint/deflating balloon,
- * measured in pages.
- */
-
-/*
- * Rates of memory allocaton when guest experiences memory pressure
- * (driver performs sleeping allocations).
- */
-#define VMW_BALLOON_RATE_ALLOC_MIN	512U
-#define VMW_BALLOON_RATE_ALLOC_MAX	2048U
-#define VMW_BALLOON_RATE_ALLOC_INC	16U
-
-/*
- * When guest is under memory pressure, use a reduced page allocation
- * rate for next several cycles.
- */
-#define VMW_BALLOON_SLOW_CYCLES		4
-
 /*
  * Use __GFP_HIGHMEM to allow pages from HIGHMEM zone. We don't
  * allow wait (__GFP_RECLAIM) for NOSLEEP page allocations. Use
@@ -282,12 +263,6 @@ struct vmballoon {
 	/* reset flag */
 	bool reset_required;
 
-	/* adjustment rates (pages per second) */
-	unsigned int rate_alloc;
-
-	/* slowdown page allocations for next few cycles */
-	unsigned int slow_allocation_cycles;
-
 	unsigned long capabilities;
 
 	struct vmballoon_batch_page *batch_page;
@@ -795,8 +770,6 @@ static void vmballoon_add_batched_page(struct vmballoon *b, int idx,
  */
 static void vmballoon_inflate(struct vmballoon *b)
 {
-	unsigned rate;
-	unsigned int allocations = 0;
 	unsigned int num_pages = 0;
 	int error = 0;
 	gfp_t flags = VMW_PAGE_ALLOC_NOSLEEP;
@@ -823,17 +796,9 @@ static void vmballoon_inflate(struct vmballoon *b)
 	 * Start with no sleep allocation rate which may be higher
 	 * than sleeping allocation rate.
 	 */
-	if (b->slow_allocation_cycles) {
-		rate = b->rate_alloc;
-		is_2m_pages = false;
-	} else {
-		rate = UINT_MAX;
-		is_2m_pages =
-			b->supported_page_sizes == VMW_BALLOON_NUM_PAGE_SIZES;
-	}
+	is_2m_pages = b->supported_page_sizes == VMW_BALLOON_NUM_PAGE_SIZES;
 
-	pr_debug("%s - goal: %d, no-sleep rate: %u, sleep rate: %d\n",
-		 __func__, b->target - b->size, rate, b->rate_alloc);
+	pr_debug("%s - goal: %d",  __func__, b->target - b->size);
 
 	while (!b->reset_required &&
 		b->size + num_pages * vmballoon_page_size(is_2m_pages)
@@ -866,31 +831,24 @@ static void vmballoon_inflate(struct vmballoon *b)
 			if (flags == VMW_PAGE_ALLOC_CANSLEEP) {
 				/*
 				 * CANSLEEP page allocation failed, so guest
-				 * is under severe memory pressure. Quickly
-				 * decrease allocation rate.
+				 * is under severe memory pressure. We just log
+				 * the event, but do not stop the inflation
+				 * due to its negative impact on performance.
 				 */
-				b->rate_alloc = max(b->rate_alloc / 2,
-						    VMW_BALLOON_RATE_ALLOC_MIN);
 				STATS_INC(b->stats.sleep_alloc_fail);
 				break;
 			}
 
 			/*
 			 * NOSLEEP page allocation failed, so the guest is
-			 * under memory pressure. Let us slow down page
-			 * allocations for next few cycles so that the guest
-			 * gets out of memory pressure. Also, if we already
-			 * allocated b->rate_alloc pages, let's pause,
-			 * otherwise switch to sleeping allocations.
+			 * under memory pressure. Slowing down page alloctions
+			 * seems to be reasonable, but doing so might actually
+			 * cause the hypervisor to throttle us down, resulting
+			 * in degraded performance. We will count on the
+			 * scheduler and standard memory management mechanisms
+			 * for now.
 			 */
-			b->slow_allocation_cycles = VMW_BALLOON_SLOW_CYCLES;
-
-			if (allocations >= b->rate_alloc)
-				break;
-
 			flags = VMW_PAGE_ALLOC_CANSLEEP;
-			/* Lower rate for sleeping allocations. */
-			rate = b->rate_alloc;
 			continue;
 		}
 
@@ -904,28 +862,11 @@ static void vmballoon_inflate(struct vmballoon *b)
 		}
 
 		cond_resched();
-
-		if (allocations >= rate) {
-			/* We allocated enough pages, let's take a break. */
-			break;
-		}
 	}
 
 	if (num_pages > 0)
 		b->ops->lock(b, num_pages, is_2m_pages, &b->target);
 
-	/*
-	 * We reached our goal without failures so try increasing
-	 * allocation rate.
-	 */
-	if (error == 0 && allocations >= b->rate_alloc) {
-		unsigned int mult = allocations / b->rate_alloc;
-
-		b->rate_alloc =
-			min(b->rate_alloc + mult * VMW_BALLOON_RATE_ALLOC_INC,
-			    VMW_BALLOON_RATE_ALLOC_MAX);
-	}
-
 	vmballoon_release_refused_pages(b, true);
 	vmballoon_release_refused_pages(b, false);
 }
@@ -1120,9 +1061,6 @@ static void vmballoon_work(struct work_struct *work)
 	if (b->reset_required)
 		vmballoon_reset(b);
 
-	if (b->slow_allocation_cycles > 0)
-		b->slow_allocation_cycles--;
-
 	if (!b->reset_required && vmballoon_send_get_target(b, &target)) {
 		/* update target, adjust size */
 		b->target = target;
@@ -1166,11 +1104,6 @@ static int vmballoon_debug_show(struct seq_file *f, void *offset)
 		   "current:            %8d pages\n",
 		   b->target, b->size);
 
-	/* format rate info */
-	seq_printf(f,
-		   "rateSleepAlloc:     %8d pages/sec\n",
-		   b->rate_alloc);
-
 	seq_printf(f,
 		   "\n"
 		   "timer:              %8u\n"
@@ -1277,9 +1210,6 @@ static int __init vmballoon_init(void)
 		INIT_LIST_HEAD(&balloon.page_sizes[is_2m_pages].refused_pages);
 	}
 
-	/* initialize rates */
-	balloon.rate_alloc = VMW_BALLOON_RATE_ALLOC_MAX;
-
 	INIT_DELAYED_WORK(&balloon.dwork, vmballoon_work);
 
 	error = vmballoon_debugfs_init(&balloon);
-- 
2.17.0