[PATCH 3/6] mfd: rave-sp: Initialize flow control and parity of the port

[Andrey Smirnov <andrew.smirnov@gmail.com>]

Relying on serial port defaults for flow control and parity can result
in complete breakdown of communication with RAVE SP on some platforms
where defaults are not what we need them to be. One such case is
VF610-base ZII SPU3 board (not supported upstream). To avoid this
problem in the future, add code to explicitly configure both.

Cc: linux-kernel@vger.kernel.org
Cc: cphealy@gmail.com
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/mfd/rave-sp.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/mfd/rave-sp.c b/drivers/mfd/rave-sp.c
index a90ec4986b22..aa75d5841ca0 100644
--- a/drivers/mfd/rave-sp.c
+++ b/drivers/mfd/rave-sp.c
@@ -766,6 +766,13 @@ static int rave_sp_probe(struct serdev_device *serdev)
 		return ret;
 
 	serdev_device_set_baudrate(serdev, baud);
+	serdev_device_set_flow_control(serdev, false);
+
+	ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
+	if (ret) {
+		dev_err(dev, "Failed to set parity\n");
+		return ret;
+	}
 
 	ret = rave_sp_get_status(sp);
 	if (ret) {
-- 
2.17.1