From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
linux-kernel@vger.kernel.org, cphealy@gmail.com,
Lucas Stach <l.stach@pengutronix.de>,
Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Subject: [PATCH 6/6] mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
Date: Fri, 6 Jul 2018 19:41:08 -0700 [thread overview]
Message-ID: <20180707024108.32373-7-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20180707024108.32373-1-andrew.smirnov@gmail.com>
CMD_GET_STATUS is not supported by some devices implementing
RDU2-compatible ICD as well as "legacy" devices. To account for that
fact, add code that obtains the same information (app/bootloader FW
version) using several different commands.
Cc: linux-kernel@vger.kernel.org
Cc: cphealy@gmail.com
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/mfd/rave-sp.c | 96 ++++++++++++++++++++++++++++---------------
1 file changed, 63 insertions(+), 33 deletions(-)
diff --git a/drivers/mfd/rave-sp.c b/drivers/mfd/rave-sp.c
index eee62ba6874d..2a8369657e38 100644
--- a/drivers/mfd/rave-sp.c
+++ b/drivers/mfd/rave-sp.c
@@ -117,14 +117,44 @@ struct rave_sp_checksum {
void (*subroutine)(const u8 *, size_t, u8 *);
};
+struct rave_sp_version {
+ u8 hardware;
+ __le16 major;
+ u8 minor;
+ u8 letter[2];
+} __packed;
+
+struct rave_sp_status {
+ struct rave_sp_version bootloader_version;
+ struct rave_sp_version firmware_version;
+ u16 rdu_eeprom_flag;
+ u16 dds_eeprom_flag;
+ u8 pic_flag;
+ u8 orientation;
+ u32 etc;
+ s16 temp[2];
+ u8 backlight_current[3];
+ u8 dip_switch;
+ u8 host_interrupt;
+ u16 voltage_28;
+ u8 i2c_device_status;
+ u8 power_status;
+ u8 general_status;
+ u8 deprecated1;
+ u8 power_led_status;
+ u8 deprecated2;
+ u8 periph_power_shutoff;
+} __packed;
+
/**
* struct rave_sp_variant_cmds - Variant specific command routines
*
* @translate: Generic to variant specific command mapping routine
- *
+ * @get_status: Variant specific implementation of CMD_GET_STATUS
*/
struct rave_sp_variant_cmds {
int (*translate)(enum rave_sp_command);
+ int (*get_status)(struct rave_sp *sp, struct rave_sp_status *);
};
/**
@@ -170,35 +200,6 @@ struct rave_sp {
const char *part_number_bootloader;
};
-struct rave_sp_version {
- u8 hardware;
- __le16 major;
- u8 minor;
- u8 letter[2];
-} __packed;
-
-struct rave_sp_status {
- struct rave_sp_version bootloader_version;
- struct rave_sp_version firmware_version;
- u16 rdu_eeprom_flag;
- u16 dds_eeprom_flag;
- u8 pic_flag;
- u8 orientation;
- u32 etc;
- s16 temp[2];
- u8 backlight_current[3];
- u8 dip_switch;
- u8 host_interrupt;
- u16 voltage_28;
- u8 i2c_device_status;
- u8 power_status;
- u8 general_status;
- u8 deprecated1;
- u8 power_led_status;
- u8 deprecated2;
- u8 periph_power_shutoff;
-} __packed;
-
static bool rave_sp_id_is_event(u8 code)
{
return (code & 0xF0) == RAVE_SP_EVNT_BASE;
@@ -660,18 +661,44 @@ static const char *devm_rave_sp_version(struct device *dev,
version->letter[1]);
}
-static int rave_sp_get_status(struct rave_sp *sp)
+static int rave_sp_rdu1_get_status(struct rave_sp *sp,
+ struct rave_sp_status *status)
{
- struct device *dev = &sp->serdev->dev;
u8 cmd[] = {
[0] = RAVE_SP_CMD_STATUS,
[1] = 0
};
+
+ return rave_sp_exec(sp, cmd, sizeof(cmd), status, sizeof(*status));
+}
+
+static int rave_sp_emulated_get_status(struct rave_sp *sp,
+ struct rave_sp_status *status)
+{
+ u8 cmd[] = {
+ [0] = RAVE_SP_CMD_GET_FIRMWARE_VERSION,
+ [1] = 0,
+ };
+ int ret;
+
+ ret = rave_sp_exec(sp, cmd, sizeof(cmd), &status->firmware_version,
+ sizeof(status->firmware_version));
+ if (ret)
+ return ret;
+
+ cmd[0] = RAVE_SP_CMD_GET_BOOTLOADER_VERSION;
+ return rave_sp_exec(sp, cmd, sizeof(cmd), &status->bootloader_version,
+ sizeof(status->bootloader_version));
+}
+
+static int rave_sp_get_status(struct rave_sp *sp)
+{
+ struct device *dev = &sp->serdev->dev;
struct rave_sp_status status;
const char *version;
int ret;
- ret = rave_sp_exec(sp, cmd, sizeof(cmd), &status, sizeof(status));
+ ret = sp->variant->cmd.get_status(sp, &status);
if (ret)
return ret;
@@ -704,6 +731,7 @@ static const struct rave_sp_variant rave_sp_legacy = {
.checksum = &rave_sp_checksum_ccitt,
.cmd = {
.translate = rave_sp_default_cmd_translate,
+ .get_status = rave_sp_emulated_get_status,
},
};
@@ -711,6 +739,7 @@ static const struct rave_sp_variant rave_sp_rdu1 = {
.checksum = &rave_sp_checksum_8b2c,
.cmd = {
.translate = rave_sp_rdu1_cmd_translate,
+ .get_status = rave_sp_rdu1_get_status,
},
};
@@ -718,6 +747,7 @@ static const struct rave_sp_variant rave_sp_rdu2 = {
.checksum = &rave_sp_checksum_ccitt,
.cmd = {
.translate = rave_sp_rdu2_cmd_translate,
+ .get_status = rave_sp_emulated_get_status,
},
};
--
2.17.1
next prev parent reply other threads:[~2018-07-07 2:42 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-07 2:41 [PATCH 0/6] RAVE SP MFD driver fixes/improvements Andrey Smirnov
2018-07-07 2:41 ` [PATCH 1/6] mfd: rave-sp: Remove unused defines Andrey Smirnov
2018-07-13 7:30 ` Lee Jones
2018-07-07 2:41 ` [PATCH 2/6] mfd: rave-sp: Fix incorrectly specified checksum type Andrey Smirnov
2018-07-13 7:30 ` Lee Jones
2018-07-07 2:41 ` [PATCH 3/6] mfd: rave-sp: Initialize flow control and parity of the port Andrey Smirnov
2018-07-13 7:31 ` Lee Jones
2018-07-07 2:41 ` [PATCH 4/6] mfd: rave-sp: Add legacy EEPROM access command translation Andrey Smirnov
2018-07-13 7:31 ` Lee Jones
2018-07-07 2:41 ` [PATCH 5/6] mfd: rave-sp: Add legacy watchdog ping " Andrey Smirnov
2018-07-13 7:31 ` Lee Jones
2018-07-07 2:41 ` Andrey Smirnov [this message]
2018-07-13 7:31 ` [PATCH 6/6] mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180707024108.32373-7-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=cphealy@gmail.com \
--cc=l.stach@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nikita.yoush@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®