From: Jia-Ju Bai <baijiaju1990@gmail.com>
To: perex@perex.cz, tiwai@suse.com, jussi@sonarnerd.net,
nob77413@gmail.com, kai.heng.feng@canonical.com,
elfring@users.sourceforge.net, daniel@zonque.org,
ruslan.bilovol@gmail.com
Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
Jia-Ju Bai <baijiaju1990@gmail.com>
Subject: [PATCH] sound: usb: quirks: Replace mdelay() with msleep() and usleep_range()
Date: Fri, 27 Jul 2018 16:55:28 +0800 [thread overview]
Message-ID: <20180727085528.5802-1-baijiaju1990@gmail.com> (raw)
snd_usb_select_mode_quirk(), snd_usb_set_interface_quirk() and
snd_usb_ctl_msg_quirk() are never called in atomic context.
They call mdelay() to busily wait, which is not necessary.
mdelay() can be replaced with msleep() and usleep_range().
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
---
sound/usb/quirks.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index acbeb52f6fd6..9eed650c54d4 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1181,7 +1181,7 @@ int snd_usb_select_mode_quirk(struct snd_usb_substream *subs,
if (err < 0)
return err;
- mdelay(20); /* Delay needed after setting the interface */
+ msleep(20); /* Delay needed after setting the interface */
/* Vendor mode switch cmd is required. */
if (fmt->formats & SNDRV_PCM_FMTBIT_DSD_U32_BE) {
@@ -1202,7 +1202,7 @@ int snd_usb_select_mode_quirk(struct snd_usb_substream *subs,
return err;
}
- mdelay(20);
+ msleep(20);
}
return 0;
}
@@ -1249,7 +1249,7 @@ void snd_usb_set_interface_quirk(struct usb_device *dev)
switch (USB_ID_VENDOR(chip->usb_id)) {
case 0x23ba: /* Playback Design */
case 0x0644: /* TEAC Corp. */
- mdelay(50);
+ msleep(50);
break;
}
}
@@ -1269,7 +1269,7 @@ void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
*/
if (USB_ID_VENDOR(chip->usb_id) == 0x23ba &&
(requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
- mdelay(20);
+ msleep(20);
/*
* "TEAC Corp." products need a 20ms delay after each
@@ -1277,14 +1277,14 @@ void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
*/
if (USB_ID_VENDOR(chip->usb_id) == 0x0644 &&
(requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
- mdelay(20);
+ msleep(20);
/* ITF-USB DSD based DACs functionality need a delay
* after each class compliant request
*/
if (is_itf_usb_dsd_dac(chip->usb_id)
&& (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
- mdelay(20);
+ msleep(20);
/* Zoom R16/24, Logitech H650e, Jabra 550a needs a tiny delay here,
* otherwise requests like get/set frequency return as failed despite
@@ -1294,7 +1294,7 @@ void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
chip->usb_id == USB_ID(0x046d, 0x0a46) ||
chip->usb_id == USB_ID(0x0b0e, 0x0349)) &&
(requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
- mdelay(1);
+ usleep_range(1000, 2000);
}
/*
--
2.17.0
next reply other threads:[~2018-07-27 8:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-27 8:55 Jia-Ju Bai [this message]
2018-07-27 9:48 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180727085528.5802-1-baijiaju1990@gmail.com \
--to=baijiaju1990@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=daniel@zonque.org \
--cc=elfring@users.sourceforge.net \
--cc=jussi@sonarnerd.net \
--cc=kai.heng.feng@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nob77413@gmail.com \
--cc=perex@perex.cz \
--cc=ruslan.bilovol@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®