From: "Matias Bjørling" <mb@lightnvm.io>
To: igor.j.konopko@intel.com, marcin.dziegielewski@intel.com,
javier@cnexlabs.com, hans.holmberg@cnexlabs.com, hlitz@ucsc.edu,
youngtack.jin@circuitblvd.com
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
"Matias Bjørling" <mb@lightnvm.io>
Subject: [PATCH] lightnvm: move device L2P detection to core
Date: Fri, 3 Aug 2018 10:54:49 +0200 [thread overview]
Message-ID: <20180803085449.3436-1-mb@lightnvm.io> (raw)
A 1.2 device is able to manage the logical to physical mapping
table internally or leave it to the host.
A target only supports one of those approaches, and therefore must
check on initialization. Move this check to core to avoid each target
implement the check.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
---
drivers/lightnvm/core.c | 5 +++++
drivers/lightnvm/pblk-init.c | 7 -------
include/linux/lightnvm.h | 6 ++++++
3 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/lightnvm/core.c b/drivers/lightnvm/core.c
index 68553c7ae937..964352720a03 100644
--- a/drivers/lightnvm/core.c
+++ b/drivers/lightnvm/core.c
@@ -355,6 +355,11 @@ static int nvm_create_tgt(struct nvm_dev *dev, struct nvm_ioctl_create *create)
return -EINVAL;
}
+ if ((tt->flags & NVM_TGT_F_HOST_L2P) != (dev->geo.dom & NVM_RSP_L2P)) {
+ pr_err("nvm: device is incompatible with target L2P type.\n");
+ return -EINVAL;
+ }
+
if (nvm_target_exists(create->tgtname)) {
pr_err("nvm: target name already exists (%s)\n",
create->tgtname);
diff --git a/drivers/lightnvm/pblk-init.c b/drivers/lightnvm/pblk-init.c
index e9e2fedff387..cc8a59e3c240 100644
--- a/drivers/lightnvm/pblk-init.c
+++ b/drivers/lightnvm/pblk-init.c
@@ -1202,13 +1202,6 @@ static void *pblk_init(struct nvm_tgt_dev *dev, struct gendisk *tdisk,
pblk->state = PBLK_STATE_RUNNING;
pblk->gc.gc_enabled = 0;
- if (geo->version == NVM_OCSSD_SPEC_12 && geo->dom & NVM_RSP_L2P) {
- pblk_err(pblk, "host-side L2P table not supported. (%x)\n",
- geo->dom);
- kfree(pblk);
- return ERR_PTR(-EINVAL);
- }
-
spin_lock_init(&pblk->resubmit_lock);
spin_lock_init(&pblk->trans_lock);
spin_lock_init(&pblk->lock);
diff --git a/include/linux/lightnvm.h b/include/linux/lightnvm.h
index 8acc2fe277d6..f4a84694e5e2 100644
--- a/include/linux/lightnvm.h
+++ b/include/linux/lightnvm.h
@@ -495,9 +495,15 @@ typedef void (nvm_tgt_exit_fn)(void *, bool);
typedef int (nvm_tgt_sysfs_init_fn)(struct gendisk *);
typedef void (nvm_tgt_sysfs_exit_fn)(struct gendisk *);
+enum {
+ NVM_TGT_F_DEV_L2P = 0,
+ NVM_TGT_F_HOST_L2P = 1 << 0,
+};
+
struct nvm_tgt_type {
const char *name;
unsigned int version[3];
+ int flags;
/* target entry points */
nvm_tgt_make_rq_fn *make_rq;
--
2.11.0
next reply other threads:[~2018-08-03 8:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-03 8:54 Matias Bjørling [this message]
2018-08-03 12:16 ` Javier Gonzalez
2018-08-03 12:37 ` Matias Bjørling
2018-08-03 12:40 ` Javier Gonzalez
2018-08-03 12:43 ` Matias Bjørling
2018-08-03 12:55 ` Javier Gonzalez
2018-08-03 13:01 ` Matias Bjørling
2018-08-03 13:19 ` Javier Gonzalez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180803085449.3436-1-mb@lightnvm.io \
--to=mb@lightnvm.io \
--cc=hans.holmberg@cnexlabs.com \
--cc=hlitz@ucsc.edu \
--cc=igor.j.konopko@intel.com \
--cc=javier@cnexlabs.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcin.dziegielewski@intel.com \
--cc=youngtack.jin@circuitblvd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®