From: "Matias Bjørling" <mb@lightnvm.io>
To: javier@cnexlabs.com
Cc: igor.j.konopko@intel.com, marcin.dziegielewski@intel.com,
hans.holmberg@cnexlabs.com, hlitz@ucsc.edu,
youngtack.jin@circuitblvd.com, linux-block@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] lightnvm: move device L2P detection to core
Date: Fri, 3 Aug 2018 15:01:35 +0200 [thread overview]
Message-ID: <e0be455d-2586-fea8-a554-2796b08dd5ff@lightnvm.io> (raw)
In-Reply-To: <B2E9F490-32FD-49C5-906D-994762E7191D@cnexlabs.com>
On 08/03/2018 02:55 PM, Javier Gonzalez wrote:
>> On 3 Aug 2018, at 14.43, Matias Bjørling <mb@lightnvm.io> wrote:
>>
>> On 08/03/2018 02:40 PM, Javier Gonzalez wrote:
>>>> On 3 Aug 2018, at 14.37, Matias Bjørling <mb@lightnvm.io> wrote:
>>>>
>>>> On 08/03/2018 02:16 PM, Javier Gonzalez wrote:
>>>>>> On 3 Aug 2018, at 10.54, Matias Bjørling <mb@lightnvm.io> wrote:
>>>>>>
>>>>>> A 1.2 device is able to manage the logical to physical mapping
>>>>>> table internally or leave it to the host.
>>>>>>
>>>>>> A target only supports one of those approaches, and therefore must
>>>>>> check on initialization. Move this check to core to avoid each target
>>>>>> implement the check.
>>>>>>
>>>>>> Signed-off-by: Matias Bjørling <mb@lightnvm.io>
>>>>>> ---
>>>>> I see where you want to go with these changes, but the way targets are
>>>>> layered on top of the LightNVM subsystem does not align with it.
>>>>> LightNVM can support different OCSSD versions and capabilities, but that
>>>>> does not mean that a target (e.g., pblk) does. The way I see it, core
>>>>> should only check for (i) the drive to expose itself in a known revision
>>>>> and (ii) the reported structures to be consistent. However, specific
>>>>> functionality is not for core to check upo.
>>>>
>>>> Why try to initialize a target, if we already know that it is incompatible?
>>> Yes, that is my point. But the one who knows if the targets supports
>>> something or not is the target, not the subsystem. Here, you are making
>>> an assumption knowing the pblk requires the L2P on the host, but that
>>> could change in the future...
>>
>> I don't believe it can. It is not supported by the 2.0 specification.
>> 1.2 is legacy.
>>
>
> Ja... We both know that people is using 1.2 variants out there...
Yes, I'm not saying that. I'm saying the spec 1.2 has been deprecated by
2.0 and no longer developed, and I'm not going to move that brainfart
into the 2.0 spec :)
>
>> I understand this from the perspective when checking for un-even
>> configurations using the geometry. But this is a spec incompatibility,
>> which I don't think the target should care about.
>
> I see the point of not having this check in pblk since we know that we
> are moving towards 2.0 and leaving 1.2 as legacy/not-upstream. But does
> it really make sense to fail LightNVM on a 1.2 capability that is spec.
> compliant? For all we know people could have this and use it from user
> space or through an internal target.
>
It only fails on target creation, not on disk initialization. The disk
will be up so user-space and targets that implements. Is that a problem?
next prev parent reply other threads:[~2018-08-03 13:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-03 8:54 Matias Bjørling
2018-08-03 12:16 ` Javier Gonzalez
2018-08-03 12:37 ` Matias Bjørling
2018-08-03 12:40 ` Javier Gonzalez
2018-08-03 12:43 ` Matias Bjørling
2018-08-03 12:55 ` Javier Gonzalez
2018-08-03 13:01 ` Matias Bjørling [this message]
2018-08-03 13:19 ` Javier Gonzalez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e0be455d-2586-fea8-a554-2796b08dd5ff@lightnvm.io \
--to=mb@lightnvm.io \
--cc=hans.holmberg@cnexlabs.com \
--cc=hlitz@ucsc.edu \
--cc=igor.j.konopko@intel.com \
--cc=javier@cnexlabs.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcin.dziegielewski@intel.com \
--cc=youngtack.jin@circuitblvd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®