mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ludovic Desroches <ludovic.desroches@microchip.com>
To: <linux-mmc@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>
Cc: <ulf.hansson@linaro.org>, <linux-kernel@vger.kernel.org>,
	<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<dgilbert@interlog.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>
Subject: [PATCH 1/2] mmc: atmel-mci: fix bad logic of sg_copy_{from,to}_buffer conversion
Date: Mon, 20 Aug 2018 10:54:44 +0200	[thread overview]
Message-ID: <20180820085445.14632-2-ludovic.desroches@microchip.com> (raw)
In-Reply-To: <20180820085445.14632-1-ludovic.desroches@microchip.com>

The conversion to sg_copy_{from,to}_buffer has been done in the wrong
way. sg_copy_to_buffer is a copy from an SG list to a linear buffer so
it can't replace memcpy(buf + offset, &value, remaining) where buf is
the virtual address of the SG. Same for sg_copy_to_buffer but in the
opposite way.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Suggested-by: Douglas Gilbert <dgilbert@interlog.com>
Fixes: 5b4277814e3f ("mmc: atmel-mci: use sg_copy_{from,to}_buffer")
---
 drivers/mmc/host/atmel-mci.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 5aa2c9404e92..be53044086c7 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1976,7 +1976,7 @@ static void atmci_read_data_pio(struct atmel_mci *host)
 	do {
 		value = atmci_readl(host, ATMCI_RDR);
 		if (likely(offset + 4 <= sg->length)) {
-			sg_pcopy_to_buffer(sg, 1, &value, sizeof(u32), offset);
+			sg_pcopy_from_buffer(sg, 1, &value, sizeof(u32), offset);
 
 			offset += 4;
 			nbytes += 4;
@@ -1993,7 +1993,7 @@ static void atmci_read_data_pio(struct atmel_mci *host)
 		} else {
 			unsigned int remaining = sg->length - offset;
 
-			sg_pcopy_to_buffer(sg, 1, &value, remaining, offset);
+			sg_pcopy_from_buffer(sg, 1, &value, remaining, offset);
 			nbytes += remaining;
 
 			flush_dcache_page(sg_page(sg));
@@ -2003,7 +2003,7 @@ static void atmci_read_data_pio(struct atmel_mci *host)
 				goto done;
 
 			offset = 4 - remaining;
-			sg_pcopy_to_buffer(sg, 1, (u8 *)&value + remaining,
+			sg_pcopy_from_buffer(sg, 1, (u8 *)&value + remaining,
 					offset, 0);
 			nbytes += offset;
 		}
@@ -2042,7 +2042,7 @@ static void atmci_write_data_pio(struct atmel_mci *host)
 
 	do {
 		if (likely(offset + 4 <= sg->length)) {
-			sg_pcopy_from_buffer(sg, 1, &value, sizeof(u32), offset);
+			sg_pcopy_to_buffer(sg, 1, &value, sizeof(u32), offset);
 			atmci_writel(host, ATMCI_TDR, value);
 
 			offset += 4;
@@ -2059,7 +2059,7 @@ static void atmci_write_data_pio(struct atmel_mci *host)
 			unsigned int remaining = sg->length - offset;
 
 			value = 0;
-			sg_pcopy_from_buffer(sg, 1, &value, remaining, offset);
+			sg_pcopy_to_buffer(sg, 1, &value, remaining, offset);
 			nbytes += remaining;
 
 			host->sg = sg = sg_next(sg);
@@ -2070,7 +2070,7 @@ static void atmci_write_data_pio(struct atmel_mci *host)
 			}
 
 			offset = 4 - remaining;
-			sg_pcopy_from_buffer(sg, 1, (u8 *)&value + remaining,
+			sg_pcopy_to_buffer(sg, 1, (u8 *)&value + remaining,
 					offset, 0);
 			atmci_writel(host, ATMCI_TDR, value);
 			nbytes += offset;
-- 
2.12.2


  reply	other threads:[~2018-08-20  8:58 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-20  8:54 [PATCH 0/2] atmel-mci and maybe android-goldfish broken on 4.18 Ludovic Desroches
2018-08-20  8:54 ` Ludovic Desroches [this message]
2018-08-20  8:54 ` [PATCH 2/2] mmc: android-goldfish: fix bad logic of sg_copy_{from,to}_buffer conversion Ludovic Desroches
2018-08-21 14:19 ` [PATCH 0/2] atmel-mci and maybe android-goldfish broken on 4.18 Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180820085445.14632-2-ludovic.desroches@microchip.com \
    --to=ludovic.desroches@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=dgilbert@interlog.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®