[PATCH v4 13/13 DONOTMERGE] ata: ahci_sunxi: remove PHY code

[Corentin Labbe <clabbe.montjoie@gmail.com>]

Since PHY code is now handled by sun4i-a10-sata-phy, the code in
ahci_sunxi is useless, remove it.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/ata/ahci_sunxi.c | 93 ------------------------------------------------
 1 file changed, 93 deletions(-)

diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
index b8cf3a1be80b..af17f8ce65b2 100644
--- a/drivers/ata/ahci_sunxi.c
+++ b/drivers/ata/ahci_sunxi.c
@@ -58,15 +58,6 @@ MODULE_PARM_DESC(enable_pmp,
 #define AHCI_P0PHYCR	0x0178
 #define AHCI_P0PHYSR	0x017c
 
-static void sunxi_clrbits(void __iomem *reg, u32 clr_val)
-{
-	u32 reg_val;
-
-	reg_val = readl(reg);
-	reg_val &= ~(clr_val);
-	writel(reg_val, reg);
-}
-
 static void sunxi_setbits(void __iomem *reg, u32 set_val)
 {
 	u32 reg_val;
@@ -86,81 +77,6 @@ static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val)
 	writel(reg_val, reg);
 }
 
-static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift)
-{
-	return (readl(reg) >> shift) & mask;
-}
-
-static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
-{
-	u32 reg_val;
-	int timeout;
-
-	/*
-	 * When using the new binding, the presence of a sata port node
-	 * means that PHY is handled by the PHY driver.
-	 * */
-	if (of_get_child_count(dev->of_node)) {
-		dev_info(dev, "Bypassing PHY init\n");
-		return 0;
-	}
-
-	/* This magic is from the original code */
-	writel(0, reg_base + AHCI_RWCR);
-	msleep(5);
-
-	sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
-	sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
-			 (0x7 << 24),
-			 (0x5 << 24) | BIT(23) | BIT(18));
-	sunxi_clrsetbits(reg_base + AHCI_PHYCS1R,
-			 (0x3 << 16) | (0x1f << 8) | (0x3 << 6),
-			 (0x2 << 16) | (0x6 << 8) | (0x2 << 6));
-	sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15));
-	sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19));
-	sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
-			 (0x7 << 20), (0x3 << 20));
-	sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
-			 (0x1f << 5), (0x19 << 5));
-	msleep(5);
-
-	sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
-
-	timeout = 250; /* Power up takes aprox 50 us */
-	do {
-		reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28);
-		if (reg_val == 0x02)
-			break;
-
-		if (--timeout == 0) {
-			dev_err(dev, "PHY power up failed.\n");
-			return -EIO;
-		}
-		udelay(1);
-	} while (1);
-
-	sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24));
-
-	timeout = 100; /* Calibration takes aprox 10 us */
-	do {
-		reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24);
-		if (reg_val == 0x00)
-			break;
-
-		if (--timeout == 0) {
-			dev_err(dev, "PHY calibration failed.\n");
-			return -EIO;
-		}
-		udelay(1);
-	} while (1);
-
-	msleep(15);
-
-	writel(0x7, reg_base + AHCI_RWCR);
-
-	return 0;
-}
-
 static void ahci_sunxi_start_engine(struct ata_port *ap)
 {
 	void __iomem *port_mmio = ahci_port_base(ap);
@@ -186,7 +102,6 @@ static struct scsi_host_template ahci_platform_sht = {
 
 static int ahci_sunxi_probe(struct platform_device *pdev)
 {
-	struct device *dev = &pdev->dev;
 	struct ahci_host_priv *hpriv;
 	int rc;
 
@@ -200,10 +115,6 @@ static int ahci_sunxi_probe(struct platform_device *pdev)
 	if (rc)
 		return rc;
 
-	rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
-	if (rc)
-		goto disable_resources;
-
 	hpriv->flags = AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
 		       AHCI_HFLAG_YES_NCQ;
 
@@ -238,10 +149,6 @@ static int ahci_sunxi_resume(struct device *dev)
 	if (rc)
 		return rc;
 
-	rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
-	if (rc)
-		goto disable_resources;
-
 	rc = ahci_platform_resume_host(dev);
 	if (rc)
 		goto disable_resources;
-- 
2.16.4