From: Lance Roy <ldr709@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>,
Lance Roy <ldr709@gmail.com>, Cliff Whickman <cpw@sgi.com>,
Robin Holt <robinmholt@gmail.com>, Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: [PATCH 03/16] sgi-xp: Replace spin_is_locked() with lockdep
Date: Tue, 2 Oct 2018 22:38:49 -0700 [thread overview]
Message-ID: <20181003053902.6910-4-ldr709@gmail.com> (raw)
In-Reply-To: <20181003053902.6910-1-ldr709@gmail.com>
lockdep_assert_held() is better suited to checking locking requirements,
since it won't get confused when someone else holds the lock. This is
also a step towards possibly removing spin_is_locked().
Signed-off-by: Lance Roy <ldr709@gmail.com>
Cc: Cliff Whickman <cpw@sgi.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/sgi-xp/xpc_channel.c | 6 +++---
drivers/misc/sgi-xp/xpc_sn2.c | 2 +-
drivers/misc/sgi-xp/xpc_uv.c | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 05a890ce2ab8..8e6607fc8a67 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -28,7 +28,7 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
{
enum xp_retval ret;
- DBUG_ON(!spin_is_locked(&ch->lock));
+ lockdep_assert_held(&ch->lock);
if (!(ch->flags & XPC_C_OPENREQUEST) ||
!(ch->flags & XPC_C_ROPENREQUEST)) {
@@ -82,7 +82,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
struct xpc_partition *part = &xpc_partitions[ch->partid];
u32 channel_was_connected = (ch->flags & XPC_C_WASCONNECTED);
- DBUG_ON(!spin_is_locked(&ch->lock));
+ lockdep_assert_held(&ch->lock);
if (!(ch->flags & XPC_C_DISCONNECTING))
return;
@@ -755,7 +755,7 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch,
{
u32 channel_was_connected = (ch->flags & XPC_C_CONNECTED);
- DBUG_ON(!spin_is_locked(&ch->lock));
+ lockdep_assert_held(&ch->lock);
if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED))
return;
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index 5a12d2a54049..0ae69b9390ce 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -1671,7 +1671,7 @@ xpc_teardown_msg_structures_sn2(struct xpc_channel *ch)
{
struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
- DBUG_ON(!spin_is_locked(&ch->lock));
+ lockdep_assert_held(&ch->lock);
ch_sn2->remote_msgqueue_pa = 0;
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 340b44d9e8cf..0441abe87880 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -1183,7 +1183,7 @@ xpc_teardown_msg_structures_uv(struct xpc_channel *ch)
{
struct xpc_channel_uv *ch_uv = &ch->sn.uv;
- DBUG_ON(!spin_is_locked(&ch->lock));
+ lockdep_assert_held(&ch->lock);
kfree(ch_uv->cached_notify_gru_mq_desc);
ch_uv->cached_notify_gru_mq_desc = NULL;
--
2.19.0
next prev parent reply other threads:[~2018-10-03 5:39 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-03 5:38 Using lockdep instead of spin_is_locked() Lance Roy
2018-10-03 5:38 ` [PATCH 01/16] x86/PCI: Replace spin_is_locked() with lockdep Lance Roy
2018-10-03 16:00 ` Bjorn Helgaas
2018-10-04 6:50 ` Lance Roy
2018-10-03 5:38 ` [PATCH 02/16] hv_balloon: " Lance Roy
2018-10-03 13:20 ` Vitaly Kuznetsov
2018-10-03 5:38 ` Lance Roy [this message]
2018-10-03 5:38 ` [PATCH 04/16] i40e: " Lance Roy
2018-10-04 18:56 ` [Intel-wired-lan] " Bowers, AndrewX
2018-10-03 5:38 ` [PATCH 05/16] igbvf: " Lance Roy
2018-10-13 0:11 ` Brown, Aaron F
2018-10-03 5:38 ` [PATCH 06/16] sfc: " Lance Roy
2018-10-03 5:38 ` [PATCH 07/16] smsc: " Lance Roy
2018-10-03 5:38 ` [PATCH 08/16] wireless: " Lance Roy
2018-10-03 9:06 ` Kalle Valo
2018-10-04 6:57 ` Lance Roy
2018-10-04 10:05 ` Kalle Valo
2018-10-05 8:35 ` [PATCH 08/16] zd1211rw: " Kalle Valo
2018-10-03 5:38 ` [PATCH 09/16] scsi: " Lance Roy
2018-10-03 13:53 ` Bart Van Assche
2018-10-11 2:37 ` Martin K. Petersen
2018-10-03 5:38 ` [PATCH 10/16] userfaultfd: " Lance Roy
2018-10-03 5:38 ` [PATCH 11/16] futex: " Lance Roy
2018-10-09 11:21 ` [tip:locking/core] " tip-bot for Lance Roy
2018-10-03 5:38 ` [PATCH 12/16] locking/mutex: " Lance Roy
2018-10-09 12:18 ` Will Deacon
2018-10-09 13:36 ` Paul E. McKenney
2018-10-03 5:38 ` [PATCH 13/16] mm: " Lance Roy
2018-10-03 7:37 ` Vlastimil Babka
2018-10-03 5:39 ` [PATCH 14/16] netfilter: " Lance Roy
2018-10-03 8:29 ` Jozsef Kadlecsik
2018-10-03 5:39 ` [PATCH 15/16] apparmor: " Lance Roy
2018-10-03 5:56 ` John Johansen
2018-10-03 5:39 ` [PATCH 16/16] KVM: arm/arm64: vgic: " Lance Roy
2018-11-02 18:45 ` Christoffer Dall
2018-11-02 19:42 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181003053902.6910-4-ldr709@gmail.com \
--to=ldr709@gmail.com \
--cc=arnd@arndb.de \
--cc=cpw@sgi.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=paulmck@linux.ibm.com \
--cc=robinmholt@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome