[PATCH AUTOSEL 3.18 01/15] xfrm: Validate address prefix lengths in the xfrm selector.

[PATCH AUTOSEL 3.18 01/15] xfrm: Validate address prefix lengths in the xfrm selector.

[Sasha Levin]

From: Steffen Klassert <steffen.klassert@secunet.com>

[ Upstream commit 07bf7908950a8b14e81aa1807e3c667eab39287a ]

We don't validate the address prefix lengths in the xfrm
selector we got from userspace. This can lead to undefined
behaviour in the address matching functions if the prefix
is too big for the given address family. Fix this by checking
the prefixes and refuse SA/policy insertation when a prefix
is invalid.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Air Icy <icytxw@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_user.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 4fe43d80c153..ca99638b5d5a 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -150,10 +150,16 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
 	err = -EINVAL;
 	switch (p->family) {
 	case AF_INET:
+		if (p->sel.prefixlen_d > 32 || p->sel.prefixlen_s > 32)
+			goto out;
+
 		break;
 
 	case AF_INET6:
 #if IS_ENABLED(CONFIG_IPV6)
+		if (p->sel.prefixlen_d > 128 || p->sel.prefixlen_s > 128)
+			goto out;
+
 		break;
 #else
 		err = -EAFNOSUPPORT;
@@ -1285,10 +1291,16 @@ static int verify_newpolicy_info(struct xfrm_userpolicy_info *p)
 
 	switch (p->sel.family) {
 	case AF_INET:
+		if (p->sel.prefixlen_d > 32 || p->sel.prefixlen_s > 32)
+			return -EINVAL;
+
 		break;
 
 	case AF_INET6:
 #if IS_ENABLED(CONFIG_IPV6)
+		if (p->sel.prefixlen_d > 128 || p->sel.prefixlen_s > 128)
+			return -EINVAL;
+
 		break;
 #else
 		return  -EAFNOSUPPORT;
-- 
2.17.1

[PATCH AUTOSEL 3.18 02/15] xfrm6: call kfree_skb when skb is toobig

[Sasha Levin]

From: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>

[ Upstream commit 215ab0f021c9fea3c18b75e7d522400ee6a49990 ]

After commit d6990976af7c5d8f55903bfb4289b6fb030bf754 ("vti6: fix PMTU caching
and reporting on xmit"), some too big skbs might be potentially passed down to
__xfrm6_output, causing it to fail to transmit but not free the skb, causing a
leak of skb, and consequentially a leak of dst references.

After running pmtu.sh, that shows as failure to unregister devices in a namespace:

[  311.397671] unregister_netdevice: waiting for veth_b to become free. Usage count = 1

The fix is to call kfree_skb in case of transmit failures.

Fixes: dd767856a36e ("xfrm6: Don't call icmpv6_send on local error")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/xfrm6_output.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index ca3f29b98ae5..63724226042c 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -151,9 +151,11 @@ static int __xfrm6_output(struct sk_buff *skb)
 
 	if (skb->len > mtu && xfrm6_local_dontfrag(skb)) {
 		xfrm6_local_rxpmtu(skb, mtu);
+		kfree_skb(skb);
 		return -EMSGSIZE;
 	} else if (!skb->ignore_df && skb->len > mtu && skb->sk) {
 		xfrm_local_error(skb, mtu);
+		kfree_skb(skb);
 		return -EMSGSIZE;
 	}
 
-- 
2.17.1

[PATCH AUTOSEL 3.18 03/15] cfg80211: reg: Init wiphy_idx in regulatory_hint_core()

[Sasha Levin]

From: Andrei Otcheretianski <andrei.otcheretianski@intel.com>

[ Upstream commit 24f33e64fcd0d50a4b1a8e5b41bd0257aa66b0e8 ]

Core regulatory hints didn't set wiphy_idx to WIPHY_IDX_INVALID. Since
the regulatory request is zeroed, wiphy_idx was always implicitly set to
0. This resulted in updating only phy #0.
Fix that.

Fixes: 806a9e39670b ("cfg80211: make regulatory_request use wiphy_idx instead of wiphy")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[add fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/reg.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 6fd53ea30193..306464b3acdb 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2033,6 +2033,7 @@ static int regulatory_hint_core(const char *alpha2)
 	request->alpha2[0] = alpha2[0];
 	request->alpha2[1] = alpha2[1];
 	request->initiator = NL80211_REGDOM_SET_BY_CORE;
+	request->wiphy_idx = WIPHY_IDX_INVALID;
 
 	queue_regulatory_request(request);
 
-- 
2.17.1

[PATCH AUTOSEL 3.18 04/15] ARM: 8799/1: mm: fix pci_ioremap_io() offset check

[Sasha Levin]

From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

[ Upstream commit 3a58ac65e2d7969bcdf1b6acb70fa4d12a88e53e ]

IO_SPACE_LIMIT is the ending address of the PCI IO space, i.e
something like 0xfffff (and not 0x100000).

Therefore, when offset = 0xf0000 is passed as argument, this function
fails even though the offset + SZ_64K fits below the
IO_SPACE_LIMIT. This makes the last chunk of 64 KB of the I/O space
not usable as it cannot be mapped.

This patch fixes that by substracing 1 to offset + SZ_64K, so that we
compare the addrss of the last byte of the I/O space against
IO_SPACE_LIMIT instead of the address of the first byte of what is
after the I/O space.

Fixes: c2794437091a4 ("ARM: Add fixed PCI i/o mapping")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/ioremap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index d1e5ad7ab3bc..1500d3befe02 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -447,7 +447,7 @@ void pci_ioremap_set_mem_type(int mem_type)
 
 int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
 {
-	BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT);
+	BUG_ON(offset + SZ_64K - 1 > IO_SPACE_LIMIT);
 
 	return ioremap_page_range(PCI_IO_VIRT_BASE + offset,
 				  PCI_IO_VIRT_BASE + offset + SZ_64K,
-- 
2.17.1

[PATCH AUTOSEL 3.18 05/15] xfrm: validate template mode

[Sasha Levin]

From: Sean Tranchetti <stranche@codeaurora.org>

[ Upstream commit 32bf94fb5c2ec4ec842152d0e5937cd4bb6738fa ]

XFRM mode parameters passed as part of the user templates
in the IP_XFRM_POLICY are never properly validated. Passing
values other than valid XFRM modes can cause stack-out-of-bounds
reads to occur later in the XFRM processing:

[  140.535608] ================================================================
[  140.543058] BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x17e4/0x1cc4
[  140.550306] Read of size 4 at addr ffffffc0238a7a58 by task repro/5148
[  140.557369]
[  140.558927] Call trace:
[  140.558936] dump_backtrace+0x0/0x388
[  140.558940] show_stack+0x24/0x30
[  140.558946] __dump_stack+0x24/0x2c
[  140.558949] dump_stack+0x8c/0xd0
[  140.558956] print_address_description+0x74/0x234
[  140.558960] kasan_report+0x240/0x264
[  140.558963] __asan_report_load4_noabort+0x2c/0x38
[  140.558967] xfrm_state_find+0x17e4/0x1cc4
[  140.558971] xfrm_resolve_and_create_bundle+0x40c/0x1fb8
[  140.558975] xfrm_lookup+0x238/0x1444
[  140.558977] xfrm_lookup_route+0x48/0x11c
[  140.558984] ip_route_output_flow+0x88/0xc4
[  140.558991] raw_sendmsg+0xa74/0x266c
[  140.558996] inet_sendmsg+0x258/0x3b0
[  140.559002] sock_sendmsg+0xbc/0xec
[  140.559005] SyS_sendto+0x3a8/0x5a8
[  140.559008] el0_svc_naked+0x34/0x38
[  140.559009]
[  140.592245] page dumped because: kasan: bad access detected
[  140.597981] page_owner info is not active (free page?)
[  140.603267]
[  140.653503] ================================================================

Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_user.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index ca99638b5d5a..017b1c91d58e 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1381,6 +1381,9 @@ static int validate_tmpl(int nr, struct xfrm_user_tmpl *ut, u16 family)
 		    (ut[i].family != prev_family))
 			return -EINVAL;
 
+		if (ut[i].mode >= XFRM_MODE_MAX)
+			return -EINVAL;
+
 		prev_family = ut[i].family;
 
 		switch (ut[i].family) {
-- 
2.17.1

[PATCH AUTOSEL 3.18 06/15] asix: Check for supported Wake-on-LAN modes

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit c4ce446e33d7a0e978256ac6fea4c80e59d9de5f ]

The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.

Fixes: 2e55cc7210fe ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/asix_common.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 75d6f26729a3..ad81af135a32 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -417,6 +417,9 @@ int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt = 0;
 
+	if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+		return -EINVAL;
+
 	if (wolinfo->wolopts & WAKE_PHY)
 		opt |= AX_MONITOR_LINK;
 	if (wolinfo->wolopts & WAKE_MAGIC)
-- 
2.17.1

[PATCH AUTOSEL 3.18 07/15] ax88179_178a: Check for supported Wake-on-LAN modes

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 5ba6b4aa9a410c5e2c6417df52b5e2118ea9b467 ]

The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.

Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/ax88179_178a.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e6338c16081a..e3f2e6098db4 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -566,6 +566,9 @@ ax88179_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt = 0;
 
+	if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+		return -EINVAL;
+
 	if (wolinfo->wolopts & WAKE_PHY)
 		opt |= AX_MONITOR_MODE_RWLC;
 	if (wolinfo->wolopts & WAKE_MAGIC)
-- 
2.17.1

[PATCH AUTOSEL 3.18 08/15] sr9800: Check for supported Wake-on-LAN modes

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit c5cb93e994ffb43b7b3b1ff10b9f928f54574a36 ]

The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.

Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/sr9800.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/usb/sr9800.c b/drivers/net/usb/sr9800.c
index 953de13267df..0144fb19a099 100644
--- a/drivers/net/usb/sr9800.c
+++ b/drivers/net/usb/sr9800.c
@@ -421,6 +421,9 @@ sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt = 0;
 
+	if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+		return -EINVAL;
+
 	if (wolinfo->wolopts & WAKE_PHY)
 		opt |= SR_MONITOR_LINK;
 	if (wolinfo->wolopts & WAKE_MAGIC)
-- 
2.17.1

[PATCH AUTOSEL 3.18 09/15] smsc75xx: Check for Wake-on-LAN modes

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 9c734b2769a73eea2e9e9767c0e0bf839ff23679 ]

The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.

Fixes: 6c636503260d ("smsc75xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/smsc75xx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 3850c342bc54..31724e40f142 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -728,6 +728,9 @@ static int smsc75xx_ethtool_set_wol(struct net_device *net,
 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
 	int ret;
 
+	if (wolinfo->wolopts & ~SUPPORTED_WAKE)
+		return -EINVAL;
+
 	pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
 
 	ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
-- 
2.17.1

[PATCH AUTOSEL 3.18 10/15] smsc95xx: Check for Wake-on-LAN modes

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit c530c471ba37bdd9fe1c7185b01455c00ae606fb ]

The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.

Fixes: e0e474a83c18 ("smsc95xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/smsc95xx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index d07bf4cb893f..cf71dc04b5bb 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -727,6 +727,9 @@ static int smsc95xx_ethtool_set_wol(struct net_device *net,
 	struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
 	int ret;
 
+	if (wolinfo->wolopts & ~SUPPORTED_WAKE)
+		return -EINVAL;
+
 	pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
 
 	ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
-- 
2.17.1

[PATCH AUTOSEL 3.18 11/15] qlcnic: fix Tx descriptor corruption on 82xx devices

[Sasha Levin]

From: Shahed Shaikh <shahed.shaikh@cavium.com>

[ Upstream commit c333fa0c4f220f8f7ea5acd6b0ebf3bf13fd684d ]

In regular NIC transmission flow, driver always configures MAC using
Tx queue zero descriptor as a part of MAC learning flow.
But with multi Tx queue supported NIC, regular transmission can occur on
any non-zero Tx queue and from that context it uses
Tx queue zero descriptor to configure MAC, at the same time TX queue
zero could be used by another CPU for regular transmission
which could lead to Tx queue zero descriptor corruption and cause FW
abort.

This patch fixes this in such a way that driver always configures
learned MAC address from the same Tx queue which is used for
regular transmission.

Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism")
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic.h         |  8 +++++---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c |  3 ++-
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h |  3 ++-
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h      |  3 ++-
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c      | 12 ++++++------
 5 files changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 76b2cfe12504..b32aefe1f3d4 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -1796,7 +1796,8 @@ struct qlcnic_hardware_ops {
 	int (*config_loopback) (struct qlcnic_adapter *, u8);
 	int (*clear_loopback) (struct qlcnic_adapter *, u8);
 	int (*config_promisc_mode) (struct qlcnic_adapter *, u32);
-	void (*change_l2_filter) (struct qlcnic_adapter *, u64 *, u16);
+	void (*change_l2_filter)(struct qlcnic_adapter *adapter, u64 *addr,
+				 u16 vlan, struct qlcnic_host_tx_ring *tx_ring);
 	int (*get_board_info) (struct qlcnic_adapter *);
 	void (*set_mac_filter_count) (struct qlcnic_adapter *);
 	void (*free_mac_list) (struct qlcnic_adapter *);
@@ -2038,9 +2039,10 @@ static inline int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter,
 }
 
 static inline void qlcnic_change_filter(struct qlcnic_adapter *adapter,
-					u64 *addr, u16 id)
+					u64 *addr, u16 vlan,
+					struct qlcnic_host_tx_ring *tx_ring)
 {
-	adapter->ahw->hw_ops->change_l2_filter(adapter, addr, id);
+	adapter->ahw->hw_ops->change_l2_filter(adapter, addr, vlan, tx_ring);
 }
 
 static inline int qlcnic_get_board_info(struct qlcnic_adapter *adapter)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index 1c40c524f0c8..21a666f98433 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -2132,7 +2132,8 @@ int qlcnic_83xx_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
 }
 
 void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *adapter, u64 *addr,
-				  u16 vlan_id)
+				  u16 vlan_id,
+				  struct qlcnic_host_tx_ring *tx_ring)
 {
 	u8 mac[ETH_ALEN];
 	memcpy(&mac, addr, ETH_ALEN);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
index f3346a3779d3..db21bc4b58ad 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
@@ -549,7 +549,8 @@ int qlcnic_83xx_wrt_reg_indirect(struct qlcnic_adapter *, ulong, u32);
 int qlcnic_83xx_nic_set_promisc(struct qlcnic_adapter *, u32);
 int qlcnic_83xx_config_hw_lro(struct qlcnic_adapter *, int);
 int qlcnic_83xx_config_rss(struct qlcnic_adapter *, int);
-void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *, u64 *, u16);
+void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *adapter, u64 *addr,
+				  u16 vlan, struct qlcnic_host_tx_ring *ring);
 int qlcnic_83xx_get_pci_info(struct qlcnic_adapter *, struct qlcnic_pci_info *);
 int qlcnic_83xx_set_nic_info(struct qlcnic_adapter *, struct qlcnic_info *);
 void qlcnic_83xx_initialize_nic(struct qlcnic_adapter *, int);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
index cbe2399c30a0..480aa1f9f2e1 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
@@ -172,7 +172,8 @@ int qlcnic_82xx_napi_add(struct qlcnic_adapter *adapter,
 			 struct net_device *netdev);
 void qlcnic_82xx_get_beacon_state(struct qlcnic_adapter *);
 void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter,
-			       u64 *uaddr, u16 vlan_id);
+			       u64 *uaddr, u16 vlan_id,
+			       struct qlcnic_host_tx_ring *tx_ring);
 int qlcnic_82xx_config_intr_coalesce(struct qlcnic_adapter *,
 				     struct ethtool_coalesce *);
 int qlcnic_82xx_set_rx_coalesce(struct qlcnic_adapter *);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
index 18e5de72e9b4..579bf42252c0 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
@@ -268,13 +268,12 @@ static void qlcnic_add_lb_filter(struct qlcnic_adapter *adapter,
 }
 
 void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, u64 *uaddr,
-			       u16 vlan_id)
+			       u16 vlan_id, struct qlcnic_host_tx_ring *tx_ring)
 {
 	struct cmd_desc_type0 *hwdesc;
 	struct qlcnic_nic_req *req;
 	struct qlcnic_mac_req *mac_req;
 	struct qlcnic_vlan_req *vlan_req;
-	struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring;
 	u32 producer;
 	u64 word;
 
@@ -301,7 +300,8 @@ void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, u64 *uaddr,
 
 static void qlcnic_send_filter(struct qlcnic_adapter *adapter,
 			       struct cmd_desc_type0 *first_desc,
-			       struct sk_buff *skb)
+			       struct sk_buff *skb,
+			       struct qlcnic_host_tx_ring *tx_ring)
 {
 	struct vlan_ethhdr *vh = (struct vlan_ethhdr *)(skb->data);
 	struct ethhdr *phdr = (struct ethhdr *)(skb->data);
@@ -335,7 +335,7 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter,
 		    tmp_fil->vlan_id == vlan_id) {
 			if (jiffies > (QLCNIC_READD_AGE * HZ + tmp_fil->ftime))
 				qlcnic_change_filter(adapter, &src_addr,
-						     vlan_id);
+						     vlan_id, tx_ring);
 			tmp_fil->ftime = jiffies;
 			return;
 		}
@@ -350,7 +350,7 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter,
 	if (!fil)
 		return;
 
-	qlcnic_change_filter(adapter, &src_addr, vlan_id);
+	qlcnic_change_filter(adapter, &src_addr, vlan_id, tx_ring);
 	fil->ftime = jiffies;
 	fil->vlan_id = vlan_id;
 	memcpy(fil->faddr, &src_addr, ETH_ALEN);
@@ -766,7 +766,7 @@ netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	}
 
 	if (adapter->drv_mac_learn)
-		qlcnic_send_filter(adapter, first_desc, skb);
+		qlcnic_send_filter(adapter, first_desc, skb, tx_ring);
 
 	tx_ring->tx_stats.tx_bytes += skb->len;
 	tx_ring->tx_stats.xmit_called++;
-- 
2.17.1

[PATCH AUTOSEL 3.18 12/15] i2c: i2c-scmi: fix for i2c_smbus_write_block_data

[Sasha Levin]

From: Edgar Cherkasov <echerkasov@dev.rtsoft.ru>

[ Upstream commit 08d9db00fe0e300d6df976e6c294f974988226dd ]

The i2c-scmi driver crashes when the SMBus Write Block transaction is
executed:

WARNING: CPU: 9 PID: 2194 at mm/page_alloc.c:3931 __alloc_pages_slowpath+0x9db/0xec0
 Call Trace:
  ? get_page_from_freelist+0x49d/0x11f0
  ? alloc_pages_current+0x6a/0xe0
  ? new_slab+0x499/0x690
  __alloc_pages_nodemask+0x265/0x280
  alloc_pages_current+0x6a/0xe0
  kmalloc_order+0x18/0x40
  kmalloc_order_trace+0x24/0xb0
  ? acpi_ut_allocate_object_desc_dbg+0x62/0x10c
  __kmalloc+0x203/0x220
  acpi_os_allocate_zeroed+0x34/0x36
  acpi_ut_copy_eobject_to_iobject+0x266/0x31e
  acpi_evaluate_object+0x166/0x3b2
  acpi_smbus_cmi_access+0x144/0x530 [i2c_scmi]
  i2c_smbus_xfer+0xda/0x370
  i2cdev_ioctl_smbus+0x1bd/0x270
  i2cdev_ioctl+0xaa/0x250
  do_vfs_ioctl+0xa4/0x600
  SyS_ioctl+0x79/0x90
  do_syscall_64+0x73/0x130
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
ACPI Error: Evaluating _SBW: 4 (20170831/smbus_cmi-185)

This problem occurs because the length of ACPI Buffer object is not
defined/initialized in the code before a corresponding ACPI method is
called. The obvious patch below fixes this issue.

Signed-off-by: Edgar Cherkasov <echerkasov@dev.rtsoft.ru>
Acked-by: Viktor Krasnov <vkrasnov@dev.rtsoft.ru>
Acked-by: Michael Brunner <Michael.Brunner@kontron.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-scmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index 7aa7b9cb6203..efefcfa24a4c 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -152,6 +152,7 @@ acpi_smbus_cmi_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
 			mt_params[3].type = ACPI_TYPE_INTEGER;
 			mt_params[3].integer.value = len;
 			mt_params[4].type = ACPI_TYPE_BUFFER;
+			mt_params[4].buffer.length = len;
 			mt_params[4].buffer.pointer = data->block + 1;
 		}
 		break;
-- 
2.17.1

[PATCH AUTOSEL 3.18 13/15] perf/ring_buffer: Prevent concurent ring buffer access

[Sasha Levin]

From: Jiri Olsa <jolsa@redhat.com>

[ Upstream commit cd6fb677ce7e460c25bdd66f689734102ec7d642 ]

Some of the scheduling tracepoints allow the perf_tp_event
code to write to ring buffer under different cpu than the
code is running on.

This results in corrupted ring buffer data demonstrated in
following perf commands:

  # perf record -e 'sched:sched_switch,sched:sched_wakeup' perf bench sched messaging
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver processes per group
  # 10 groups == 400 processes run

       Total time: 0.383 [sec]
  [ perf record: Woken up 8 times to write data ]
  0x42b890 [0]: failed to process type: -1765585640
  [ perf record: Captured and wrote 4.825 MB perf.data (29669 samples) ]

  # perf report --stdio
  0x42b890 [0]: failed to process type: -1765585640

The reason for the corruption are some of the scheduling tracepoints,
that have __perf_task dfined and thus allow to store data to another
cpu ring buffer:

  sched_waking
  sched_wakeup
  sched_wakeup_new
  sched_stat_wait
  sched_stat_sleep
  sched_stat_iowait
  sched_stat_blocked

The perf_tp_event function first store samples for current cpu
related events defined for tracepoint:

    hlist_for_each_entry_rcu(event, head, hlist_entry)
      perf_swevent_event(event, count, &data, regs);

And then iterates events of the 'task' and store the sample
for any task's event that passes tracepoint checks:

  ctx = rcu_dereference(task->perf_event_ctxp[perf_sw_context]);

  list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
    if (event->attr.type != PERF_TYPE_TRACEPOINT)
      continue;
    if (event->attr.config != entry->type)
      continue;

    perf_swevent_event(event, count, &data, regs);
  }

Above code can race with same code running on another cpu,
ending up with 2 cpus trying to store under the same ring
buffer, which is specifically not allowed.

This patch prevents the problem, by allowing only events with the same
current cpu to receive the event.

NOTE: this requires the use of (per-task-)per-cpu buffers for this
feature to work; perf-record does this.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
[peterz: small edits to Changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: e6dab5ffab59 ("perf/trace: Add ability to set a target task for events")
Link: http://lkml.kernel.org/r/20180923161343.GB15054@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 1f08f691de59..98ec8186b7d6 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6351,6 +6351,8 @@ void perf_tp_event(u64 addr, u64 count, void *record, int entry_size,
 			goto unlock;
 
 		list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
+			if (event->cpu != smp_processor_id())
+				continue;
 			if (event->attr.type != PERF_TYPE_TRACEPOINT)
 				continue;
 			if (event->attr.config != entry->type)
-- 
2.17.1

[PATCH AUTOSEL 3.18 14/15] net/usb: cancel pending work when unbinding smsc75xx

[Sasha Levin]

From: Yu Zhao <yuzhao@google.com>

[ Upstream commit f7b2a56e1f3dcbdb4cf09b2b63e859ffe0e09df8 ]

Cancel pending work before freeing smsc75xx private data structure
during binding. This fixes the following crash in the driver:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
IP: mutex_lock+0x2b/0x3f
<snipped>
Workqueue: events smsc75xx_deferred_multicast_write [smsc75xx]
task: ffff8caa83e85700 task.stack: ffff948b80518000
RIP: 0010:mutex_lock+0x2b/0x3f
<snipped>
Call Trace:
 smsc75xx_deferred_multicast_write+0x40/0x1af [smsc75xx]
 process_one_work+0x18d/0x2fc
 worker_thread+0x1a2/0x269
 ? pr_cont_work+0x58/0x58
 kthread+0xfa/0x10a
 ? pr_cont_work+0x58/0x58
 ? rcu_read_unlock_sched_notrace+0x48/0x48
 ret_from_fork+0x22/0x40

Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/smsc75xx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 31724e40f142..8b5f80ea64e6 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -1509,6 +1509,7 @@ static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
 {
 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
 	if (pdata) {
+		cancel_work_sync(&pdata->set_multicast);
 		netif_dbg(dev, ifdown, dev->net, "free pdata\n");
 		kfree(pdata);
 		pdata = NULL;
-- 
2.17.1

[PATCH AUTOSEL 3.18 15/15] net: cxgb3_main: fix a missing-check bug

[Sasha Levin]

From: Wenwen Wang <wang6495@umn.edu>

[ Upstream commit 2c05d88818ab6571816b93edce4d53703870d7ae ]

In cxgb_extension_ioctl(), the command of the ioctl is firstly copied from
the user-space buffer 'useraddr' to 'cmd' and checked through the
switch statement. If the command is not as expected, an error code
EOPNOTSUPP is returned. In the following execution, i.e., the cases of the
switch statement, the whole buffer of 'useraddr' is copied again to a
specific data structure, according to what kind of command is requested.
However, after the second copy, there is no re-check on the newly-copied
command. Given that the buffer 'useraddr' is in the user space, a malicious
user can race to change the command between the two copies. By doing so,
the attacker can supply malicious data to the kernel and cause undefined
behavior.

This patch adds a re-check in each case of the switch statement if there is
a second copy in that case, to re-check whether the command obtained in the
second copy is the same as the one in the first copy. If not, an error code
EINVAL is returned.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
index db76f7040455..dd3e5247190e 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
@@ -2146,6 +2146,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 			return -EPERM;
 		if (copy_from_user(&t, useraddr, sizeof(t)))
 			return -EFAULT;
+		if (t.cmd != CHELSIO_SET_QSET_PARAMS)
+			return -EINVAL;
 		if (t.qset_idx >= SGE_QSETS)
 			return -EINVAL;
 		if (!in_range(t.intr_lat, 0, M_NEWTIMER) ||
@@ -2245,6 +2247,9 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 		if (copy_from_user(&t, useraddr, sizeof(t)))
 			return -EFAULT;
 
+		if (t.cmd != CHELSIO_GET_QSET_PARAMS)
+			return -EINVAL;
+
 		/* Display qsets for all ports when offload enabled */
 		if (test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) {
 			q1 = 0;
@@ -2289,6 +2294,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 			return -EBUSY;
 		if (copy_from_user(&edata, useraddr, sizeof(edata)))
 			return -EFAULT;
+		if (edata.cmd != CHELSIO_SET_QSET_NUM)
+			return -EINVAL;
 		if (edata.val < 1 ||
 			(edata.val > 1 && !(adapter->flags & USING_MSIX)))
 			return -EINVAL;
@@ -2329,6 +2336,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 			return -EPERM;
 		if (copy_from_user(&t, useraddr, sizeof(t)))
 			return -EFAULT;
+		if (t.cmd != CHELSIO_LOAD_FW)
+			return -EINVAL;
 		/* Check t.len sanity ? */
 		fw_data = memdup_user(useraddr + sizeof(t), t.len);
 		if (IS_ERR(fw_data))
@@ -2352,6 +2361,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 			return -EBUSY;
 		if (copy_from_user(&m, useraddr, sizeof(m)))
 			return -EFAULT;
+		if (m.cmd != CHELSIO_SETMTUTAB)
+			return -EINVAL;
 		if (m.nmtus != NMTUS)
 			return -EINVAL;
 		if (m.mtus[0] < 81)	/* accommodate SACK */
@@ -2393,6 +2404,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 			return -EBUSY;
 		if (copy_from_user(&m, useraddr, sizeof(m)))
 			return -EFAULT;
+		if (m.cmd != CHELSIO_SET_PM)
+			return -EINVAL;
 		if (!is_power_of_2(m.rx_pg_sz) ||
 			!is_power_of_2(m.tx_pg_sz))
 			return -EINVAL;	/* not power of 2 */
@@ -2426,6 +2439,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 			return -EIO;	/* need the memory controllers */
 		if (copy_from_user(&t, useraddr, sizeof(t)))
 			return -EFAULT;
+		if (t.cmd != CHELSIO_GET_MEM)
+			return -EINVAL;
 		if ((t.addr & 7) || (t.len & 7))
 			return -EINVAL;
 		if (t.mem_id == MEM_CM)
@@ -2478,6 +2493,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 			return -EAGAIN;
 		if (copy_from_user(&t, useraddr, sizeof(t)))
 			return -EFAULT;
+		if (t.cmd != CHELSIO_SET_TRACE_FILTER)
+			return -EINVAL;
 
 		tp = (const struct trace_params *)&t.sip;
 		if (t.config_tx)
-- 
2.17.1