From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Christian Hewitt <christianshewitt@gmail.com>,
Marcel Holtmann <marcel@holtmann.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH AUTOSEL 4.9 17/48] Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetooth
Date: Wed, 31 Oct 2018 19:10:23 -0400 [thread overview]
Message-ID: <20181031231054.29333-17-sashal@kernel.org> (raw)
In-Reply-To: <20181031231054.29333-1-sashal@kernel.org>
From: Christian Hewitt <christianshewitt@gmail.com>
[ Upstream commit a357ea098c9605f60d92a66a9073f56ce25726da ]
This patch adds the device ID for the AMPAK AP6335 combo module used
in the 1st generation WeTek Hub Android/LibreELEC HTPC box. The WiFI
chip identifies itself as BCM4339, while Bluetooth identifies itself
as BCM4335 (rev C0):
```
[ 4.864248] Bluetooth: hci0: BCM: chip id 86
[ 4.866388] Bluetooth: hci0: BCM: features 0x2f
[ 4.889317] Bluetooth: hci0: BCM4335C0
[ 4.889332] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0000
[ 9.778383] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0268
```
Output from hciconfig:
```
hci0: Type: Primary Bus: UART
BD Address: 43:39:00:00:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING
RX bytes:7567 acl:234 sco:0 events:386 errors:0
TX bytes:53844 acl:77 sco:0 commands:304 errors:0
Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH SNIFF
Link mode: SLAVE ACCEPT
Name: 'HUB'
Class: 0x0c0000
Service Classes: Rendering, Capturing
Device Class: Miscellaneous,
HCI Version: 4.0 (0x6) Revision: 0x10c
LMP Version: 4.0 (0x6) Subversion: 0x6109
Manufacturer: Broadcom Corporation (15)
```
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btbcm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index fdb44829ab6f..475f25c2451d 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -270,6 +270,7 @@ static const struct {
{ 0x4103, "BCM4330B1" }, /* 002.001.003 */
{ 0x410e, "BCM43341B0" }, /* 002.001.014 */
{ 0x4406, "BCM4324B3" }, /* 002.004.006 */
+ { 0x6109, "BCM4335C0" }, /* 003.001.009 */
{ 0x610c, "BCM4354" }, /* 003.001.012 */
{ }
};
--
2.17.1
next prev parent reply other threads:[~2018-10-31 23:11 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-31 23:10 [PATCH AUTOSEL 4.9 01/48] net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 02/48] locking/lockdep: Fix debug_locks off performance problem Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 03/48] ataflop: fix error handling during setup Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 04/48] swim: fix cleanup on setup error Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 05/48] tun: Consistently configure generic netdev params via rtnetlink Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 06/48] s390/sthyi: Fix machine name validity indication Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 07/48] hwmon: (pwm-fan) Set fan speed to 0 on suspend Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 08/48] perf tools: Free temporary 'sys' string in read_event_files() Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 09/48] perf tools: Cleanup trace-event-info 'tdata' leak Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 10/48] perf strbuf: Match va_{add,copy} with va_end Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 11/48] cpupower: Fix coredump on VMWare Sasha Levin
2018-11-12 10:31 ` Rafael David Tinoco
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 12/48] mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01 Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 13/48] iwlwifi: pcie: avoid empty free RB queue Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 14/48] x86/olpc: Indicate that legacy PC XO-1 platform should not register RTC Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 15/48] cpufreq: dt: Try freeing static OPPs only if we have added them Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 16/48] regulator: fixed: Default enable high on DT regulators Sasha Levin
2018-10-31 23:10 ` Sasha Levin [this message]
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 18/48] x86: boot: Fix EFI stub alignment Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 19/48] pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 20/48] brcmfmac: fix for proper support of 160MHz bandwidth Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 21/48] kprobes: Return error if we fail to reuse kprobe instead of BUG_ON() Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 22/48] ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 23/48] pinctrl: qcom: spmi-mpp: Fix drive strength setting Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 24/48] pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 25/48] pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() " Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 26/48] ixgbevf: VF2VF TCP RSS Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 27/48] ath10k: schedule hardware restart if WMI command times out Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 28/48] cgroup, netclassid: add a preemption point to write_classid Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 29/48] scsi: esp_scsi: Track residual for PIO transfers Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 30/48] scsi: megaraid_sas: fix a missing-check bug Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 31/48] RDMA/core: Do not expose unsupported counters Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 32/48] IB/ipoib: Clear IPCB before icmp_send Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 33/48] tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 34/48] Drivers: hv: kvp: Fix two "this statement may fall through" warnings Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 35/48] VMCI: Resource wildcard match fixed Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 36/48] usb: gadget: udc: atmel: handle at91sam9rl PMC Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 37/48] ext4: fix argument checking in EXT4_IOC_MOVE_EXT Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 38/48] MD: fix invalid stored role for a disk Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 39/48] PCI/MSI: Warn and return error if driver enables MSI/MSI-X twice Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 40/48] coresight: etb10: Fix handling of perf mode Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 41/48] crypto: caam - fix implicit casts in endianness helpers Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 42/48] usb: chipidea: Prevent unbalanced IRQ disable Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 43/48] driver/dma/ioat: Call del_timer_sync() without holding prep_lock Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 44/48] uio: ensure class is registered before devices Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 45/48] scsi: lpfc: Correct soft lockup when running mds diagnostics Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 46/48] signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace init Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 47/48] dmaengine: dma-jz4780: Return error if not probed from DT Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 48/48] ALSA: hda: Check the non-cached stream buffers more explicitly Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181031231054.29333-17-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=christianshewitt@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®