mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Parav Pandit <parav@mellanox.com>,
	Leon Romanovsky <leonro@mellanox.com>,
	Doug Ledford <dledford@redhat.com>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH AUTOSEL 4.9 31/48] RDMA/core: Do not expose unsupported counters
Date: Wed, 31 Oct 2018 19:10:37 -0400	[thread overview]
Message-ID: <20181031231054.29333-31-sashal@kernel.org> (raw)
In-Reply-To: <20181031231054.29333-1-sashal@kernel.org>

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit 0f6ef65d1c6ec8deb5d0f11f86631ec4cfe8f22e ]

If the provider driver (such as rdma_rxe) doesn't support pma counters,
avoid exposing its directory similar to optional hw_counters directory.
If core fails to read the PMA counter, return an error so that user can
retry later if needed.

Fixes: 35c4cbb17811 ("IB/core: Create get_perf_mad function in sysfs.c")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/sysfs.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 42de5f22da93..a1240ddca026 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -485,7 +485,7 @@ static ssize_t show_pma_counter(struct ib_port *p, struct port_attribute *attr,
 	ret = get_perf_mad(p->ibdev, p->port_num, tab_attr->attr_id, &data,
 			40 + offset / 8, sizeof(data));
 	if (ret < 0)
-		return sprintf(buf, "N/A (no PMA)\n");
+		return ret;
 
 	switch (width) {
 	case 4:
@@ -1008,10 +1008,12 @@ static int add_port(struct ib_device *device, int port_num,
 		goto err_put;
 	}
 
-	p->pma_table = get_counter_table(device, port_num);
-	ret = sysfs_create_group(&p->kobj, p->pma_table);
-	if (ret)
-		goto err_put_gid_attrs;
+	if (device->process_mad) {
+		p->pma_table = get_counter_table(device, port_num);
+		ret = sysfs_create_group(&p->kobj, p->pma_table);
+		if (ret)
+			goto err_put_gid_attrs;
+	}
 
 	p->gid_group.name  = "gids";
 	p->gid_group.attrs = alloc_group_attrs(show_port_gid, attr.gid_tbl_len);
@@ -1124,7 +1126,8 @@ static int add_port(struct ib_device *device, int port_num,
 	p->gid_group.attrs = NULL;
 
 err_remove_pma:
-	sysfs_remove_group(&p->kobj, p->pma_table);
+	if (p->pma_table)
+		sysfs_remove_group(&p->kobj, p->pma_table);
 
 err_put_gid_attrs:
 	kobject_put(&p->gid_attr_group->kobj);
@@ -1236,7 +1239,9 @@ static void free_port_list_attributes(struct ib_device *device)
 			kfree(port->hw_stats);
 			free_hsag(&port->kobj, port->hw_stats_ag);
 		}
-		sysfs_remove_group(p, port->pma_table);
+
+		if (port->pma_table)
+			sysfs_remove_group(p, port->pma_table);
 		sysfs_remove_group(p, &port->pkey_group);
 		sysfs_remove_group(p, &port->gid_group);
 		sysfs_remove_group(&port->gid_attr_group->kobj,
-- 
2.17.1


  parent reply	other threads:[~2018-10-31 23:11 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-31 23:10 [PATCH AUTOSEL 4.9 01/48] net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 02/48] locking/lockdep: Fix debug_locks off performance problem Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 03/48] ataflop: fix error handling during setup Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 04/48] swim: fix cleanup on setup error Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 05/48] tun: Consistently configure generic netdev params via rtnetlink Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 06/48] s390/sthyi: Fix machine name validity indication Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 07/48] hwmon: (pwm-fan) Set fan speed to 0 on suspend Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 08/48] perf tools: Free temporary 'sys' string in read_event_files() Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 09/48] perf tools: Cleanup trace-event-info 'tdata' leak Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 10/48] perf strbuf: Match va_{add,copy} with va_end Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 11/48] cpupower: Fix coredump on VMWare Sasha Levin
2018-11-12 10:31   ` Rafael David Tinoco
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 12/48] mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01 Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 13/48] iwlwifi: pcie: avoid empty free RB queue Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 14/48] x86/olpc: Indicate that legacy PC XO-1 platform should not register RTC Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 15/48] cpufreq: dt: Try freeing static OPPs only if we have added them Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 16/48] regulator: fixed: Default enable high on DT regulators Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 17/48] Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetooth Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 18/48] x86: boot: Fix EFI stub alignment Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 19/48] pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 20/48] brcmfmac: fix for proper support of 160MHz bandwidth Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 21/48] kprobes: Return error if we fail to reuse kprobe instead of BUG_ON() Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 22/48] ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 23/48] pinctrl: qcom: spmi-mpp: Fix drive strength setting Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 24/48] pinctrl: spmi-mpp: Fix pmic_mpp_config_get() to be compliant Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 25/48] pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() " Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 26/48] ixgbevf: VF2VF TCP RSS Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 27/48] ath10k: schedule hardware restart if WMI command times out Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 28/48] cgroup, netclassid: add a preemption point to write_classid Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 29/48] scsi: esp_scsi: Track residual for PIO transfers Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 30/48] scsi: megaraid_sas: fix a missing-check bug Sasha Levin
2018-10-31 23:10 ` Sasha Levin [this message]
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 32/48] IB/ipoib: Clear IPCB before icmp_send Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 33/48] tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 34/48] Drivers: hv: kvp: Fix two "this statement may fall through" warnings Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 35/48] VMCI: Resource wildcard match fixed Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 36/48] usb: gadget: udc: atmel: handle at91sam9rl PMC Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 37/48] ext4: fix argument checking in EXT4_IOC_MOVE_EXT Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 38/48] MD: fix invalid stored role for a disk Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 39/48] PCI/MSI: Warn and return error if driver enables MSI/MSI-X twice Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 40/48] coresight: etb10: Fix handling of perf mode Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 41/48] crypto: caam - fix implicit casts in endianness helpers Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 42/48] usb: chipidea: Prevent unbalanced IRQ disable Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 43/48] driver/dma/ioat: Call del_timer_sync() without holding prep_lock Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 44/48] uio: ensure class is registered before devices Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 45/48] scsi: lpfc: Correct soft lockup when running mds diagnostics Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 46/48] signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace init Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 47/48] dmaengine: dma-jz4780: Return error if not probed from DT Sasha Levin
2018-10-31 23:10 ` [PATCH AUTOSEL 4.9 48/48] ALSA: hda: Check the non-cached stream buffers more explicitly Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181031231054.29333-31-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=dledford@redhat.com \
    --cc=leonro@mellanox.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=parav@mellanox.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®