* [PATCH v3 3/6] ARM: dts: add PWM for Bananapi M2 Ultrar board.
@ 2018-11-25 16:20 Hao Zhang
0 siblings, 0 replies; only message in thread
From: Hao Zhang @ 2018-11-25 16:20 UTC (permalink / raw)
To: robh+dt, mark.rutland, maxime.ripard, wens, mturquette, sboyd,
thierry.reding
Cc: linux-gpio, linux-kernel, devicetree, linux-arm-kernel,
linux-pwm, linux-sunxi, hao5781286
This patch adds pwm status for Bananapi M2 Ultrar board and the status
also used as LCD-PWM status.
Signed-off-by: Hao Zhang <hao5781286@gmail.com>
---
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 438b7b4..d785c9b 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -272,6 +272,12 @@
status = "okay";
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_ch0_pin>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
--
2.7.4
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-11-25 16:20 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-25 16:20 [PATCH v3 3/6] ARM: dts: add PWM for Bananapi M2 Ultrar board Hao Zhang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®