From: Yu Chen <chenyu56@huawei.com>
To: <linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <suzhuangluan@hisilicon.com>, <kongfei@hisilicon.com>,
Yu Chen <chenyu56@huawei.com>, Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
John Stultz <john.stultz@linaro.org>,
"Binghui Wang" <wangbinghui@hisilicon.com>
Subject: [PATCH v1 05/12] usb: dwc3: Add two quirks for Hisilicon Kirin Soc Platform
Date: Mon, 3 Dec 2018 11:45:08 +0800 [thread overview]
Message-ID: <20181203034515.91412-6-chenyu56@huawei.com> (raw)
In-Reply-To: <20181203034515.91412-1-chenyu56@huawei.com>
There are tow quirks for DesignWare USB3 DRD Core of Hisilicon Kirin Soc.
1)SPLIT_BOUNDARY_DISABLE should be set for Host mode
2)A GCTL soft reset should be executed when switch mode
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
drivers/usb/dwc3/core.c | 43 +++++++++++++++++++++++++++++++++++++++++++
drivers/usb/dwc3/core.h | 7 +++++++
drivers/usb/dwc3/gadget.c | 2 +-
3 files changed, 51 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index becfbb87f791..b539bcc45d3b 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -111,11 +111,25 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
dwc->current_dr_role = mode;
}
+static void dwc3_gctl_core_soft_reset(struct dwc3 *dwc)
+{
+ int reg;
+
+ reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+ reg |= (DWC3_GCTL_CORESOFTRESET);
+ dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+ reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+ reg &= ~(DWC3_GCTL_CORESOFTRESET);
+ dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
static void __dwc3_set_mode(struct work_struct *work)
{
struct dwc3 *dwc = work_to_dwc(work);
unsigned long flags;
int ret;
+ int reg;
if (dwc->dr_mode != USB_DR_MODE_OTG)
return;
@@ -155,6 +169,10 @@ static void __dwc3_set_mode(struct work_struct *work)
dwc3_set_prtcap(dwc, dwc->desired_dr_role);
+ /* Execute a GCTL Core Soft Reset when switch mode */
+ if (dwc->gctl_reset_quirk)
+ dwc3_gctl_core_soft_reset(dwc);
+
spin_unlock_irqrestore(&dwc->lock, flags);
switch (dwc->desired_dr_role) {
@@ -168,6 +186,11 @@ static void __dwc3_set_mode(struct work_struct *work)
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
phy_calibrate(dwc->usb2_generic_phy);
+ if (dwc->dis_split_quirk) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
}
break;
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -1298,6 +1321,11 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->dis_metastability_quirk = device_property_read_bool(dev,
"snps,dis_metastability_quirk");
+ dwc->dis_split_quirk = device_property_read_bool(dev,
+ "snps,dis-split-quirk");
+ dwc->gctl_reset_quirk = device_property_read_bool(dev,
+ "snps,gctl-reset-quirk");
+
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@@ -1815,10 +1843,25 @@ static int dwc3_resume(struct device *dev)
return 0;
}
+
+static void dwc3_complete(struct device *dev)
+{
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+ u32 reg;
+
+ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
+ dwc->dis_split_quirk) {
+ dev_dbg(dwc->dev, "set DWC3_GUCTL3_SPLITDISABLE\n");
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
+}
#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops dwc3_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+ .complete = dwc3_complete,
SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
dwc3_runtime_idle)
};
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 5bfb62533e0f..b3cea95f7720 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -135,6 +135,7 @@
#define DWC3_GEVNTCOUNT(n) (0xc40c + ((n) * 0x10))
#define DWC3_GHWPARAMS8 0xc600
+#define DWC3_GUCTL3 0xc60c
#define DWC3_GFLADJ 0xc630
/* Device Registers */
@@ -359,6 +360,9 @@
/* Global User Control Register 2 */
#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE BIT(14)
+
/* Device Configuration Register */
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
@@ -1168,6 +1172,9 @@ struct dwc3 {
unsigned dis_metastability_quirk:1;
+ unsigned dis_split_quirk:1;
+ unsigned gctl_reset_quirk:1;
+
u16 imod_interval;
};
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 679c12e14522..cd54ad3eaf01 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -269,7 +269,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
{
const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
struct dwc3 *dwc = dep->dwc;
- u32 timeout = 1000;
+ u32 timeout = 5000;
u32 saved_config = 0;
u32 reg;
--
2.15.0-rc2
next prev parent reply other threads:[~2018-12-03 3:46 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-03 3:45 [PATCH v1 00/12] Add support for usb on Hikey960 Yu Chen
2018-12-03 3:45 ` [PATCH v1 01/12] dt-bindings: usb: add support for dwc3 controller on HiSilicon SoCs Yu Chen
2018-12-03 8:35 ` Sergei Shtylyov
2018-12-03 8:51 ` Chen Yu
2018-12-03 8:59 ` Sergei Shtylyov
2018-12-03 9:28 ` Chen Yu
2018-12-19 14:09 ` Rob Herring
2018-12-20 1:33 ` Chen Yu
2018-12-20 6:46 ` Felipe Balbi
2018-12-20 13:48 ` Rob Herring
2018-12-03 3:45 ` [PATCH v1 02/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY Yu Chen
2018-12-19 14:14 ` Rob Herring
2018-12-20 1:52 ` Chen Yu
2018-12-03 3:45 ` [PATCH v1 03/12] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960 Yu Chen
2018-12-19 14:21 ` Rob Herring
2018-12-20 2:02 ` Chen Yu
2018-12-03 3:45 ` [PATCH v1 04/12] usb: dwc3: dwc3-hisi: Add code for dwc3 of Hisilicon Soc Platform Yu Chen
2018-12-03 8:12 ` Andy Shevchenko
2018-12-03 8:30 ` Chen Yu
2018-12-03 3:45 ` Yu Chen [this message]
2018-12-03 8:02 ` [PATCH v1 05/12] usb: dwc3: Add two quirks for Hisilicon Kirin " Andy Shevchenko
2018-12-03 8:23 ` Chen Yu
2018-12-03 3:45 ` [PATCH v1 06/12] phy: Add usb phy support for hi3660 Soc of Hisilicon Yu Chen
2018-12-03 8:14 ` Andy Shevchenko
2018-12-03 3:45 ` [PATCH v1 07/12] usb: roles: Find the usb role switch by also matching against the device node Yu Chen
2018-12-03 8:17 ` Andy Shevchenko
2018-12-03 12:25 ` Heikki Krogerus
2019-01-21 8:36 ` Chen Yu
2019-01-21 13:51 ` Heikki Krogerus
2019-01-25 12:35 ` Heikki Krogerus
2018-12-03 3:45 ` [PATCH v1 08/12] usb: roles: Add usb role switch notifier Yu Chen
2018-12-03 12:38 ` Heikki Krogerus
2018-12-04 1:07 ` Chen Yu
2018-12-03 3:45 ` [PATCH v1 09/12] usb: dwc3: Registering a role switch in the DRD code Yu Chen
2018-12-03 9:15 ` Andy Shevchenko
2018-12-03 9:30 ` Chen Yu
2018-12-03 12:43 ` Heikki Krogerus
2018-12-04 10:54 ` Heikki Krogerus
2018-12-05 0:56 ` Chen Yu
2018-12-03 3:45 ` [PATCH v1 10/12] hikey960: Support usb functionality of Hikey960 Yu Chen
2018-12-03 9:23 ` Andy Shevchenko
2018-12-04 1:40 ` Chen Yu
2018-12-04 17:47 ` Andy Shevchenko
2018-12-05 1:57 ` Chen Yu
2018-12-05 8:44 ` Andy Shevchenko
2018-12-03 3:45 ` [PATCH v1 11/12] usb: gadget: Add configfs attribuite for controling match_existing_only Yu Chen
2018-12-03 9:25 ` Andy Shevchenko
2018-12-04 1:22 ` Chen Yu
2018-12-03 9:53 ` Krzysztof Opasiak
2018-12-03 3:45 ` [PATCH v1 12/12] dts: hi3660: Add support for usb on Hikey960 Yu Chen
2018-12-04 12:45 ` Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181203034515.91412-6-chenyu56@huawei.com \
--to=chenyu56@huawei.com \
--cc=balbi@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=john.stultz@linaro.org \
--cc=kongfei@hisilicon.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=suzhuangluan@hisilicon.com \
--cc=wangbinghui@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®