From: Paul Cercueil <paul@crapouillou.net>
To: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Boris Brezillon <bbrezillon@kernel.org>,
Marek Vasut <marek.vasut@gmail.com>,
Richard Weinberger <richard@nod.at>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: Mathieu Malaterre <malat@debian.org>,
linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v2 1/9] mtd: rawnand: Move drivers for Ingenic SoCs to subfolder
Date: Sat, 2 Feb 2019 20:19:18 -0300 [thread overview]
Message-ID: <20190202231926.2444-2-paul@crapouillou.net> (raw)
In-Reply-To: <20190202231926.2444-1-paul@crapouillou.net>
Before adding support for more SoCs and seeing the number of files for
these drivers grow, we move them to their own subfolder to keep it tidy.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
Changes:
v2: New patch
drivers/mtd/nand/raw/Kconfig | 14 +-------------
drivers/mtd/nand/raw/Makefile | 3 +--
drivers/mtd/nand/raw/ingenic/Kconfig | 13 +++++++++++++
drivers/mtd/nand/raw/ingenic/Makefile | 2 ++
drivers/mtd/nand/raw/{ => ingenic}/jz4740_nand.c | 0
drivers/mtd/nand/raw/{ => ingenic}/jz4780_bch.c | 0
drivers/mtd/nand/raw/{ => ingenic}/jz4780_bch.h | 0
drivers/mtd/nand/raw/{ => ingenic}/jz4780_nand.c | 0
8 files changed, 17 insertions(+), 15 deletions(-)
create mode 100644 drivers/mtd/nand/raw/ingenic/Kconfig
create mode 100644 drivers/mtd/nand/raw/ingenic/Makefile
rename drivers/mtd/nand/raw/{ => ingenic}/jz4740_nand.c (100%)
rename drivers/mtd/nand/raw/{ => ingenic}/jz4780_bch.c (100%)
rename drivers/mtd/nand/raw/{ => ingenic}/jz4780_bch.h (100%)
rename drivers/mtd/nand/raw/{ => ingenic}/jz4780_nand.c (100%)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 1a55d3e3d4c5..d886be2fc174 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -470,19 +470,7 @@ config MTD_NAND_NUC900
This enables the driver for the NAND Flash on evaluation board based
on w90p910 / NUC9xx.
-config MTD_NAND_JZ4740
- tristate "Support for JZ4740 SoC NAND controller"
- depends on MACH_JZ4740 || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Enables support for NAND Flash on JZ4740 SoC based boards.
-
-config MTD_NAND_JZ4780
- tristate "Support for NAND on JZ4780 SoC"
- depends on JZ4780_NEMC
- help
- Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
- based boards, using the BCH controller for hardware error correction.
+source "drivers/mtd/nand/raw/ingenic/Kconfig"
config MTD_NAND_FSMC
tristate "Support for NAND on ST Micros FSMC"
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 57159b349054..f419d373d090 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -45,8 +45,7 @@ obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
-obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
-obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch.o
+obj-y += ingenic/
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig
new file mode 100644
index 000000000000..67806c87b2c4
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/Kconfig
@@ -0,0 +1,13 @@
+config MTD_NAND_JZ4740
+ tristate "Support for JZ4740 SoC NAND controller"
+ depends on MACH_JZ4740 || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables support for NAND Flash on JZ4740 SoC based boards.
+
+config MTD_NAND_JZ4780
+ tristate "Support for NAND on JZ4780 SoC"
+ depends on JZ4780_NEMC
+ help
+ Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
+ based boards, using the BCH controller for hardware error correction.
diff --git a/drivers/mtd/nand/raw/ingenic/Makefile b/drivers/mtd/nand/raw/ingenic/Makefile
new file mode 100644
index 000000000000..44c2ca053d24
--- /dev/null
+++ b/drivers/mtd/nand/raw/ingenic/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch.o
diff --git a/drivers/mtd/nand/raw/jz4740_nand.c b/drivers/mtd/nand/raw/ingenic/jz4740_nand.c
similarity index 100%
rename from drivers/mtd/nand/raw/jz4740_nand.c
rename to drivers/mtd/nand/raw/ingenic/jz4740_nand.c
diff --git a/drivers/mtd/nand/raw/jz4780_bch.c b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c
similarity index 100%
rename from drivers/mtd/nand/raw/jz4780_bch.c
rename to drivers/mtd/nand/raw/ingenic/jz4780_bch.c
diff --git a/drivers/mtd/nand/raw/jz4780_bch.h b/drivers/mtd/nand/raw/ingenic/jz4780_bch.h
similarity index 100%
rename from drivers/mtd/nand/raw/jz4780_bch.h
rename to drivers/mtd/nand/raw/ingenic/jz4780_bch.h
diff --git a/drivers/mtd/nand/raw/jz4780_nand.c b/drivers/mtd/nand/raw/ingenic/jz4780_nand.c
similarity index 100%
rename from drivers/mtd/nand/raw/jz4780_nand.c
rename to drivers/mtd/nand/raw/ingenic/jz4780_nand.c
--
2.20.1
next prev parent reply other threads:[~2019-02-02 23:20 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-02 23:19 [PATCH v2 0/9] Ingenic JZ4780 NAND patchset v2 Paul Cercueil
2019-02-02 23:19 ` Paul Cercueil [this message]
2019-02-02 23:19 ` [PATCH v2 2/9] dt-bindings: mtd: ingenic: Add compatible strings for the JZ4740 Paul Cercueil
2019-02-18 19:20 ` Rob Herring
2019-02-02 23:19 ` [PATCH v2 3/9] mtd: rawnand: jz4780: Use SPDX license notifiers Paul Cercueil
2019-02-02 23:19 ` [PATCH v2 4/9] mtd: rawnand: jz4780: Add support for the JZ4740 Paul Cercueil
2019-02-03 7:31 ` Boris Brezillon
2019-02-03 13:56 ` Paul Cercueil
2019-02-03 14:08 ` Boris Brezillon
2019-02-03 14:10 ` Paul Cercueil
2019-02-03 14:24 ` Boris Brezillon
2019-02-02 23:19 ` [PATCH v2 5/9] mtd: rawnand: jz4780: Add ooblayout for the JZ4725B Paul Cercueil
2019-02-03 7:21 ` Boris Brezillon
2019-02-02 23:19 ` [PATCH v2 6/9] mtd: rawnand: jz4780: Add ooblayout for the Qi Ben Nanonote Paul Cercueil
2019-02-03 7:30 ` Boris Brezillon
2019-02-02 23:19 ` [PATCH v2 7/9] mtd: rawnand: jz4780-bch: Separate top-level and SoC specific code Paul Cercueil
2019-02-02 23:19 ` [PATCH v2 8/9] mtd: rawnand: jz4780-bch: Add support for the JZ4725B Paul Cercueil
2019-02-02 23:19 ` [PATCH v2 9/9] mtd: rawnand: jz4780-bch: Add support for the JZ4740 Paul Cercueil
2019-02-03 7:35 ` Boris Brezillon
2019-02-03 13:58 ` Paul Cercueil
2019-02-03 14:16 ` Boris Brezillon
2019-02-03 14:56 ` Paul Cercueil
2019-02-03 15:07 ` Boris Brezillon
2019-02-03 15:41 ` Paul Cercueil
2019-02-04 9:26 ` kbuild test robot
2019-02-04 10:02 ` kbuild test robot
2019-02-03 7:20 ` [PATCH v2 0/9] Ingenic JZ4780 NAND patchset v2 Boris Brezillon
2019-02-03 13:01 ` Paul Cercueil
2019-02-03 14:04 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190202231926.2444-2-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=bbrezillon@kernel.org \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=harveyhuntnexus@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=malat@debian.org \
--cc=marek.vasut@gmail.com \
--cc=mark.rutland@arm.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®