* [PATCH v2 1/2] arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328
@ 2019-02-06 15:20 Katsuhiro Suzuki
2019-02-06 15:20 ` [PATCH v2 2/2] arm64: dts: rockchip: add HDMI sound node for rk3328-rock64 Katsuhiro Suzuki
0 siblings, 1 reply; 2+ messages in thread
From: Katsuhiro Suzuki @ 2019-02-06 15:20 UTC (permalink / raw)
To: Heiko Stuebner, linux-rockchip
Cc: linux-arm-kernel, linux-kernel, Katsuhiro Suzuki
This patch adds #sound-dai-cells to use HDMI node as audio
codec from device tree of rk3328 boards.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 84f14b132e8f..374b5da93a35 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -665,6 +665,7 @@
pinctrl-names = "default";
pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
rockchip,grf = <&grf>;
+ #sound-dai-cells = <0>;
status = "disabled";
ports {
--
2.20.1
^ permalink raw reply [flat|nested] 2+ messages in thread* [PATCH v2 2/2] arm64: dts: rockchip: add HDMI sound node for rk3328-rock64
2019-02-06 15:20 [PATCH v2 1/2] arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328 Katsuhiro Suzuki
@ 2019-02-06 15:20 ` Katsuhiro Suzuki
0 siblings, 0 replies; 2+ messages in thread
From: Katsuhiro Suzuki @ 2019-02-06 15:20 UTC (permalink / raw)
To: Heiko Stuebner, linux-rockchip
Cc: linux-arm-kernel, linux-kernel, Katsuhiro Suzuki
This patch adds HDMI sound (I2S0) node and remove dma properties
from UART2 node for rock64.
The DMAC of rk3328 connected to 16 DMA sources. Each sources have ID
number that is called 'Req number' in rk3328 TRM. Currently, total
7 sources has been activated as follows:
| Req number | Source | Required |
| | | channels |
|------------+--------+-----------|
| 14, 15 | I2S1 | 2ch |
| 6, 7 | UART2 | 2ch |
| 10 | SPDIF | 1ch |
| 8, 9 | SPI0 | 2ch |
|------------+--------+-----------|
| | Total | 7ch |
HDMI audio needs to activate new source I2S0 (Req number 11 and 12).
I2S0 can work concurrently with other sources, but rk3328 DMAC can
use max 8 channels at same time. If I2S0 is simply activated,
required DMAC channels are 9. It does not work.
UART2 can work without DMA resources, so this patch removes 2 DMA
channel allocation for UART2. These released channels can be used
for I2S0.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
---
.../arm64/boot/dts/rockchip/rk3328-rock64.dts | 24 ++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 2157a528276b..e21645aa3fa5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -68,7 +68,8 @@
sound {
compatible = "audio-graph-card";
label = "rockchip,rk3328";
- dais = <&i2s1_p0
+ dais = <&i2s0_p0
+ &i2s1_p0
&spdif_p0>;
};
@@ -141,6 +142,12 @@
&hdmi {
status = "okay";
+
+ port@0 {
+ hdmi_p0_0: endpoint {
+ remote-endpoint = <&i2s0_p0_0>;
+ };
+ };
};
&hdmiphy {
@@ -256,6 +263,18 @@
};
};
+&i2s0 {
+ status = "okay";
+
+ i2s0_p0: port {
+ i2s0_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&hdmi_p0_0>;
+ };
+ };
+};
+
&i2s1 {
status = "okay";
@@ -343,6 +362,9 @@
&uart2 {
status = "okay";
+
+ /delete-property/ dmas;
+ /delete-property/ dma-names;
};
&u2phy {
--
2.20.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-02-06 15:20 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-06 15:20 [PATCH v2 1/2] arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328 Katsuhiro Suzuki
2019-02-06 15:20 ` [PATCH v2 2/2] arm64: dts: rockchip: add HDMI sound node for rk3328-rock64 Katsuhiro Suzuki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®