* [PATCH v4 2/2] drivers: mux: Add Generic regmap bitfield-based multiplexer in mmio-mux
[not found] <20190226195642.480-1-pankaj.bansal@nxp.com>
@ 2019-02-26 14:32 ` Pankaj Bansal
0 siblings, 0 replies; only message in thread
From: Pankaj Bansal @ 2019-02-26 14:32 UTC (permalink / raw)
To: Leo Li, Peter Rosin; +Cc: Pankaj Bansal, linux-kernel
Generic register bitfield-based multiplexer that controls the multiplexer
producer defined under a parent node.
The driver corresponding to parent node provides register read/write
capabilities.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
---
Notes:
V4:
- As per Peter's suggestion fixup the NULL from dev_get_regmap as early as
possible using ternary operator.
V3:
- Added the patch in series with device tree binding patch
- Added the NULL return handling for regmap
V2:
- removed seperate driver regmap.c and added the regmap function in mmio.c
based on compatible field, the syscon or regmap function would be called
- Modified the KConfig as per Peter's comments
drivers/mux/Kconfig | 12 ++++++------
drivers/mux/mmio.c | 6 +++++-
2 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig
index 7659d6c5f718..e5c571fd232c 100644
--- a/drivers/mux/Kconfig
+++ b/drivers/mux/Kconfig
@@ -46,14 +46,14 @@ config MUX_GPIO
be called mux-gpio.
config MUX_MMIO
- tristate "MMIO register bitfield-controlled Multiplexer"
- depends on (OF && MFD_SYSCON) || COMPILE_TEST
+ tristate "MMIO/Regmap register bitfield-controlled Multiplexer"
+ depends on OF || COMPILE_TEST
help
- MMIO register bitfield-controlled Multiplexer controller.
+ MMIO/Regmap register bitfield-controlled Multiplexer controller.
- The driver builds multiplexer controllers for bitfields in a syscon
- register. For N bit wide bitfields, there will be 2^N possible
- multiplexer states.
+ The driver builds multiplexer controllers for bitfields in either
+ a syscon register or a driver regmap register. For N bit wide
+ bitfields, there will be 2^N possible multiplexer states.
To compile the driver as a module, choose M here: the module will
be called mux-mmio.
diff --git a/drivers/mux/mmio.c b/drivers/mux/mmio.c
index 935ac44aa209..44a7a0e885b8 100644
--- a/drivers/mux/mmio.c
+++ b/drivers/mux/mmio.c
@@ -28,6 +28,7 @@ static const struct mux_control_ops mux_mmio_ops = {
static const struct of_device_id mux_mmio_dt_ids[] = {
{ .compatible = "mmio-mux", },
+ { .compatible = "reg-mux", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mux_mmio_dt_ids);
@@ -43,7 +44,10 @@ static int mux_mmio_probe(struct platform_device *pdev)
int ret;
int i;
- regmap = syscon_node_to_regmap(np->parent);
+ if (of_device_is_compatible(np, "mmio-mux"))
+ regmap = syscon_node_to_regmap(np->parent);
+ else
+ regmap = dev_get_regmap(dev->parent, NULL) ?: ERR_PTR(-ENODEV);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
dev_err(dev, "failed to get regmap: %d\n", ret);
--
2.17.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2019-02-26 14:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20190226195642.480-1-pankaj.bansal@nxp.com>
2019-02-26 14:32 ` [PATCH v4 2/2] drivers: mux: Add Generic regmap bitfield-based multiplexer in mmio-mux Pankaj Bansal
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®