* [PATCH] usb: typec: fusb302: Fix debugfs mutex initialisation @ 2019-03-18 15:06 Marc Zyngier 2019-03-18 15:39 ` Guenter Roeck 0 siblings, 1 reply; 4+ messages in thread From: Marc Zyngier @ 2019-03-18 15:06 UTC (permalink / raw) To: Guenter Roeck, Heikki Krogerus, Greg Kroah-Hartman Cc: linux-usb, linux-kernel Running a kernel with the fusb302 driver and lockdep enabled leads to an unpleasant warning: [ 4.617477] INFO: trying to register non-static key. [ 4.617930] the code is fine but needs lockdep annotation. [ 4.618418] turning off the locking correctness validator. [ 4.618913] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.1.0-rc1-00007-g3542533f3fc9 #13 [ 4.619620] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019 [ 4.620454] Call trace: [ 4.620693] dump_backtrace+0x0/0x138 [ 4.621028] show_stack+0x24/0x30 [ 4.621336] dump_stack+0xbc/0x104 [ 4.621649] register_lock_class+0x594/0x598 [ 4.622036] __lock_acquire+0x80/0x11b8 [ 4.622384] lock_acquire+0xdc/0x260 [ 4.622711] __mutex_lock+0x90/0x8a0 [ 4.623037] mutex_lock_nested+0x3c/0x50 [ 4.623394] _fusb302_log+0x88/0x1f0 [ 4.623721] fusb302_log+0x7c/0xa0 [ 4.624033] tcpm_init+0x5c/0x190 [ 4.624336] tcpm_init+0x3c/0x130 [ 4.624640] tcpm_register_port+0x574/0x878 [ 4.625019] fusb302_probe+0x2c8/0x590 Despite what the message says, the code isn't fine, as it tries to make use of the fusb302_log facility pretty early. This requires the logbuffer_lock mutex to be initialised, but that only happens much later. Boo. Hoist the fusb302_debugfs_init call before tcpm_register_port so that we can enjoy a working mutex. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> --- drivers/usb/typec/tcpm/fusb302.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index e9344997329c..7e3f8901daf6 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -1790,6 +1790,7 @@ static int fusb302_probe(struct i2c_client *client, goto destroy_workqueue; } + fusb302_debugfs_init(chip); chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev); if (IS_ERR(chip->tcpm_port)) { ret = PTR_ERR(chip->tcpm_port); @@ -1807,7 +1808,6 @@ static int fusb302_probe(struct i2c_client *client, goto tcpm_unregister_port; } enable_irq_wake(chip->gpio_int_n_irq); - fusb302_debugfs_init(chip); i2c_set_clientdata(client, chip); return ret; -- 2.20.1 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] usb: typec: fusb302: Fix debugfs mutex initialisation 2019-03-18 15:06 [PATCH] usb: typec: fusb302: Fix debugfs mutex initialisation Marc Zyngier @ 2019-03-18 15:39 ` Guenter Roeck 2019-03-18 17:32 ` Marc Zyngier 0 siblings, 1 reply; 4+ messages in thread From: Guenter Roeck @ 2019-03-18 15:39 UTC (permalink / raw) To: Marc Zyngier; +Cc: Heikki Krogerus, Greg Kroah-Hartman, linux-usb, linux-kernel On Mon, Mar 18, 2019 at 03:06:00PM +0000, Marc Zyngier wrote: > Running a kernel with the fusb302 driver and lockdep enabled > leads to an unpleasant warning: > > [ 4.617477] INFO: trying to register non-static key. > [ 4.617930] the code is fine but needs lockdep annotation. > [ 4.618418] turning off the locking correctness validator. > [ 4.618913] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.1.0-rc1-00007-g3542533f3fc9 #13 > [ 4.619620] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019 > [ 4.620454] Call trace: > [ 4.620693] dump_backtrace+0x0/0x138 > [ 4.621028] show_stack+0x24/0x30 > [ 4.621336] dump_stack+0xbc/0x104 > [ 4.621649] register_lock_class+0x594/0x598 > [ 4.622036] __lock_acquire+0x80/0x11b8 > [ 4.622384] lock_acquire+0xdc/0x260 > [ 4.622711] __mutex_lock+0x90/0x8a0 > [ 4.623037] mutex_lock_nested+0x3c/0x50 > [ 4.623394] _fusb302_log+0x88/0x1f0 > [ 4.623721] fusb302_log+0x7c/0xa0 > [ 4.624033] tcpm_init+0x5c/0x190 > [ 4.624336] tcpm_init+0x3c/0x130 > [ 4.624640] tcpm_register_port+0x574/0x878 > [ 4.625019] fusb302_probe+0x2c8/0x590 > > Despite what the message says, the code isn't fine, as it tries to > make use of the fusb302_log facility pretty early. This requires the > logbuffer_lock mutex to be initialised, but that only happens much > later. Boo. > > Hoist the fusb302_debugfs_init call before tcpm_register_port so that > we can enjoy a working mutex. > > Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> > --- > drivers/usb/typec/tcpm/fusb302.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c > index e9344997329c..7e3f8901daf6 100644 > --- a/drivers/usb/typec/tcpm/fusb302.c > +++ b/drivers/usb/typec/tcpm/fusb302.c > @@ -1790,6 +1790,7 @@ static int fusb302_probe(struct i2c_client *client, > goto destroy_workqueue; > } > > + fusb302_debugfs_init(chip); This needs another error exit label right after destroy_workqueue, and an added call to fusb302_debugfs_exit() after that label. > chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev); > if (IS_ERR(chip->tcpm_port)) { > ret = PTR_ERR(chip->tcpm_port); > @@ -1807,7 +1808,6 @@ static int fusb302_probe(struct i2c_client *client, > goto tcpm_unregister_port; > } > enable_irq_wake(chip->gpio_int_n_irq); > - fusb302_debugfs_init(chip); > i2c_set_clientdata(client, chip); > > return ret; > -- > 2.20.1 > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] usb: typec: fusb302: Fix debugfs mutex initialisation 2019-03-18 15:39 ` Guenter Roeck @ 2019-03-18 17:32 ` Marc Zyngier 2019-03-18 17:40 ` Guenter Roeck 0 siblings, 1 reply; 4+ messages in thread From: Marc Zyngier @ 2019-03-18 17:32 UTC (permalink / raw) To: Guenter Roeck Cc: Heikki Krogerus, Greg Kroah-Hartman, linux-usb, linux-kernel On Mon, 18 Mar 2019 08:39:22 -0700 Guenter Roeck <linux@roeck-us.net> wrote: > On Mon, Mar 18, 2019 at 03:06:00PM +0000, Marc Zyngier wrote: > > Running a kernel with the fusb302 driver and lockdep enabled > > leads to an unpleasant warning: > > > > [ 4.617477] INFO: trying to register non-static key. > > [ 4.617930] the code is fine but needs lockdep annotation. > > [ 4.618418] turning off the locking correctness validator. > > [ 4.618913] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.1.0-rc1-00007-g3542533f3fc9 #13 > > [ 4.619620] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019 > > [ 4.620454] Call trace: > > [ 4.620693] dump_backtrace+0x0/0x138 > > [ 4.621028] show_stack+0x24/0x30 > > [ 4.621336] dump_stack+0xbc/0x104 > > [ 4.621649] register_lock_class+0x594/0x598 > > [ 4.622036] __lock_acquire+0x80/0x11b8 > > [ 4.622384] lock_acquire+0xdc/0x260 > > [ 4.622711] __mutex_lock+0x90/0x8a0 > > [ 4.623037] mutex_lock_nested+0x3c/0x50 > > [ 4.623394] _fusb302_log+0x88/0x1f0 > > [ 4.623721] fusb302_log+0x7c/0xa0 > > [ 4.624033] tcpm_init+0x5c/0x190 > > [ 4.624336] tcpm_init+0x3c/0x130 > > [ 4.624640] tcpm_register_port+0x574/0x878 > > [ 4.625019] fusb302_probe+0x2c8/0x590 > > > > Despite what the message says, the code isn't fine, as it tries to > > make use of the fusb302_log facility pretty early. This requires the > > logbuffer_lock mutex to be initialised, but that only happens much > > later. Boo. > > > > Hoist the fusb302_debugfs_init call before tcpm_register_port so that > > we can enjoy a working mutex. > > > > Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> > > --- > > drivers/usb/typec/tcpm/fusb302.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c > > index e9344997329c..7e3f8901daf6 100644 > > --- a/drivers/usb/typec/tcpm/fusb302.c > > +++ b/drivers/usb/typec/tcpm/fusb302.c > > @@ -1790,6 +1790,7 @@ static int fusb302_probe(struct i2c_client *client, > > goto destroy_workqueue; > > } > > > > + fusb302_debugfs_init(chip); > > This needs another error exit label right after destroy_workqueue, > and an added call to fusb302_debugfs_exit() after that label. You do mean before destroy_workqueue, right? Otherwise, the error handling doesn't nest properly... Something like this: diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index 7e3f8901daf6..76cb8be6f3eb 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -1796,7 +1796,7 @@ static int fusb302_probe(struct i2c_client *client, ret = PTR_ERR(chip->tcpm_port); if (ret != -EPROBE_DEFER) dev_err(dev, "cannot register tcpm port, ret=%d", ret); - goto destroy_workqueue; + goto unregister_debugfs; } ret = devm_request_threaded_irq(chip->dev, chip->gpio_int_n_irq, @@ -1814,6 +1814,8 @@ static int fusb302_probe(struct i2c_client *client, tcpm_unregister_port: tcpm_unregister_port(chip->tcpm_port); +unregister_debugfs: + fusb302_debugfs_exit(chip); destroy_workqueue: destroy_workqueue(chip->wq); Thanks, M. -- Without deviation from the norm, progress is not possible. ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] usb: typec: fusb302: Fix debugfs mutex initialisation 2019-03-18 17:32 ` Marc Zyngier @ 2019-03-18 17:40 ` Guenter Roeck 0 siblings, 0 replies; 4+ messages in thread From: Guenter Roeck @ 2019-03-18 17:40 UTC (permalink / raw) To: Marc Zyngier; +Cc: Heikki Krogerus, Greg Kroah-Hartman, linux-usb, linux-kernel On Mon, Mar 18, 2019 at 05:32:56PM +0000, Marc Zyngier wrote: > On Mon, 18 Mar 2019 08:39:22 -0700 > Guenter Roeck <linux@roeck-us.net> wrote: > > > On Mon, Mar 18, 2019 at 03:06:00PM +0000, Marc Zyngier wrote: > > > Running a kernel with the fusb302 driver and lockdep enabled > > > leads to an unpleasant warning: > > > > > > [ 4.617477] INFO: trying to register non-static key. > > > [ 4.617930] the code is fine but needs lockdep annotation. > > > [ 4.618418] turning off the locking correctness validator. > > > [ 4.618913] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.1.0-rc1-00007-g3542533f3fc9 #13 > > > [ 4.619620] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019 > > > [ 4.620454] Call trace: > > > [ 4.620693] dump_backtrace+0x0/0x138 > > > [ 4.621028] show_stack+0x24/0x30 > > > [ 4.621336] dump_stack+0xbc/0x104 > > > [ 4.621649] register_lock_class+0x594/0x598 > > > [ 4.622036] __lock_acquire+0x80/0x11b8 > > > [ 4.622384] lock_acquire+0xdc/0x260 > > > [ 4.622711] __mutex_lock+0x90/0x8a0 > > > [ 4.623037] mutex_lock_nested+0x3c/0x50 > > > [ 4.623394] _fusb302_log+0x88/0x1f0 > > > [ 4.623721] fusb302_log+0x7c/0xa0 > > > [ 4.624033] tcpm_init+0x5c/0x190 > > > [ 4.624336] tcpm_init+0x3c/0x130 > > > [ 4.624640] tcpm_register_port+0x574/0x878 > > > [ 4.625019] fusb302_probe+0x2c8/0x590 > > > > > > Despite what the message says, the code isn't fine, as it tries to > > > make use of the fusb302_log facility pretty early. This requires the > > > logbuffer_lock mutex to be initialised, but that only happens much > > > later. Boo. > > > > > > Hoist the fusb302_debugfs_init call before tcpm_register_port so that > > > we can enjoy a working mutex. > > > > > > Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> > > > --- > > > drivers/usb/typec/tcpm/fusb302.c | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c > > > index e9344997329c..7e3f8901daf6 100644 > > > --- a/drivers/usb/typec/tcpm/fusb302.c > > > +++ b/drivers/usb/typec/tcpm/fusb302.c > > > @@ -1790,6 +1790,7 @@ static int fusb302_probe(struct i2c_client *client, > > > goto destroy_workqueue; > > > } > > > > > > + fusb302_debugfs_init(chip); > > > > This needs another error exit label right after destroy_workqueue, > > and an added call to fusb302_debugfs_exit() after that label. > > You do mean before destroy_workqueue, right? Otherwise, the error > handling doesn't nest properly... Something like this: > Yes, you are correct. Sorry for the confusion. Guenter > diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c > index 7e3f8901daf6..76cb8be6f3eb 100644 > --- a/drivers/usb/typec/tcpm/fusb302.c > +++ b/drivers/usb/typec/tcpm/fusb302.c > @@ -1796,7 +1796,7 @@ static int fusb302_probe(struct i2c_client *client, > ret = PTR_ERR(chip->tcpm_port); > if (ret != -EPROBE_DEFER) > dev_err(dev, "cannot register tcpm port, ret=%d", ret); > - goto destroy_workqueue; > + goto unregister_debugfs; > } > > ret = devm_request_threaded_irq(chip->dev, chip->gpio_int_n_irq, > @@ -1814,6 +1814,8 @@ static int fusb302_probe(struct i2c_client *client, > > tcpm_unregister_port: > tcpm_unregister_port(chip->tcpm_port); > +unregister_debugfs: > + fusb302_debugfs_exit(chip); > destroy_workqueue: > destroy_workqueue(chip->wq); > > Thanks, > > M. > -- > Without deviation from the norm, progress is not possible. ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-03-18 17:40 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-03-18 15:06 [PATCH] usb: typec: fusb302: Fix debugfs mutex initialisation Marc Zyngier 2019-03-18 15:39 ` Guenter Roeck 2019-03-18 17:32 ` Marc Zyngier 2019-03-18 17:40 ` Guenter Roeck
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
Powered by JetHome