[Milbeaut PATCH v0.4 0/2] mmc: sdhci_f_sdh30: Add support for Milbeaut

[Milbeaut PATCH v0.4 0/2] mmc: sdhci_f_sdh30: Add support for Milbeaut

[Takao Orito]

The following patches add driver support for SD Host controller on
Socionext's Milbeaut M10V platforms.

SD Host controller on Milbeaut is consist of two controller parts.
One is core controller F_SDH30, this is similar to sdhci-fujitsu
controller.
Another is bridge controller. This bridge controller is not compatible
with sdhci-fujitsu controller. This is special for Milbeaut series.

It has the several parts,
 - reset control
 - clock enable / select for SDR50/25/12
 - hold control of DATA/CMD line
 - select characteristics for WP/CD/LED line
 - Re-tuning control for mode3
 - Capability setting
   Timeout Clock / Base Clock / Timer Count for Re-Tuning /
   Debounce period
These requires special procedures at reset or clock enable/change or
 further tuning of clock.

Takao Orito (2):
  dt-bindings: mmc: sdhci-fujitsu.txt: add miilbeaut driver
  mmc: sdhci_f_sdh30: Add support for Milbeaut M10V host controller

 .../devicetree/bindings/mmc/sdhci-fujitsu.txt      |  22 +-
 drivers/mmc/host/sdhci_f_sdh30.c                   | 324 +++++++++++++++++++--
 2 files changed, 315 insertions(+), 31 deletions(-)

-- 
1.9.1

Re: [Milbeaut PATCH v0.4 0/2] mmc: sdhci_f_sdh30: Add support for Milbeaut

[orito.takao]

Hi All

I'm sorry, I had mistaken the Subject format of my patch series.
I will send new patches with right format.
Please ignore this series.

Orito

> The following patches add driver support for SD Host controller on
> Socionext's Milbeaut M10V platforms.
> 
> SD Host controller on Milbeaut is consist of two controller parts.
> One is core controller F_SDH30, this is similar to sdhci-fujitsu
> controller.
> Another is bridge controller. This bridge controller is not compatible
> with sdhci-fujitsu controller. This is special for Milbeaut series.
> 
> It has the several parts,
>  - reset control
>  - clock enable / select for SDR50/25/12
>  - hold control of DATA/CMD line
>  - select characteristics for WP/CD/LED line
>  - Re-tuning control for mode3
>  - Capability setting
>    Timeout Clock / Base Clock / Timer Count for Re-Tuning /
>    Debounce period
> These requires special procedures at reset or clock enable/change or
>  further tuning of clock.
> 
> Takao Orito (2):
>   dt-bindings: mmc: sdhci-fujitsu.txt: add miilbeaut driver
>   mmc: sdhci_f_sdh30: Add support for Milbeaut M10V host controller
> 
>  .../devicetree/bindings/mmc/sdhci-fujitsu.txt      |  22 +-
>  drivers/mmc/host/sdhci_f_sdh30.c                   | 324 +++++++++++++++++++--
>  2 files changed, 315 insertions(+), 31 deletions(-)
> 
> -- 
> 1.9.1
> 

-- 
Takao Orito <orito.takao@socionext.com>