mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2 0/2] Add EDMA0/EDMA1 nodes on i.MX8QXP
@ 2019-03-27 19:03 Daniel Baluta
  2019-03-27 19:03 ` [PATCH v2 1/2] bindings: fsl-edma: Document fsl,imx8qxp-edma compatbile string Daniel Baluta
  2019-03-27 19:03 ` [PATCH v2 2/2] arm64: dts: imx8qxp: Add EDMA0/EDMA1 nodes Daniel Baluta
  0 siblings, 2 replies; 6+ messages in thread
From: Daniel Baluta @ 2019-03-27 19:03 UTC (permalink / raw)
  To: shawnguo
  Cc: robh+dt, mark.rutland, s.hauer, kernel, festevam, dl-linux-imx,
	Aisheng Dong, Peng Fan, Anson Huang, devicetree,
	linux-arm-kernel, S.j. Wang, linux-kernel, Daniel Baluta

First patch documents the fsl,imx8qxp-edma string while the second
adds the two EDMA nodes used by Audio peripherals on i.MX8QXP

Changes since v1:
	* use "fsl,imx8qxp-edma" compatbile instead of "fsl,imx8qm-edma"
	because this patch adds support for imx8QXP. eDMA driver is similar
        for 8QM/8QXP but it doesn't have yet support added for these boards
	so just the compatible string closer to the actual hardware.

Daniel Baluta (2):
  bindings: fsl-edma: Document fsl,imx8qxp-edma compatbile string
  arm64: dts: imx8qxp: Add EDMA0/EDMA1 nodes

 .../devicetree/bindings/dma/fsl-edma.txt      |  1 +
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 72 +++++++++++++++++++
 2 files changed, 73 insertions(+)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2019-03-28  9:25 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-27 19:03 [PATCH v2 0/2] Add EDMA0/EDMA1 nodes on i.MX8QXP Daniel Baluta
2019-03-27 19:03 ` [PATCH v2 1/2] bindings: fsl-edma: Document fsl,imx8qxp-edma compatbile string Daniel Baluta
2019-03-27 19:03 ` [PATCH v2 2/2] arm64: dts: imx8qxp: Add EDMA0/EDMA1 nodes Daniel Baluta
2019-03-28  2:31   ` Aisheng Dong
2019-03-28  8:53     ` Daniel Baluta
2019-03-28  9:25       ` Aisheng Dong

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®