From: Paul Cercueil <paul@crapouillou.net>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Thierry Reding <thierry.reding@gmail.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paul.burton@mips.com>,
James Hogan <jhogan@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: Mathieu Malaterre <malat@debian.org>,
od@zcrc.me, linux-pwm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-watchdog@vger.kernel.org, linux-mips@vger.kernel.org,
linux-doc@vger.kernel.org, linux-clk@vger.kernel.org,
Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v11 07/27] watchdog: jz4740: Use WDT clock provided by TCU driver
Date: Thu, 28 Mar 2019 00:16:11 +0100 [thread overview]
Message-ID: <20190327231631.15708-8-paul@crapouillou.net> (raw)
In-Reply-To: <20190327231631.15708-1-paul@crapouillou.net>
Instead of requesting the "ext" clock and handling the watchdog clock
divider and gating in the watchdog driver, we now request and use the
"wdt" clock that is supplied by the ingenic-timer "TCU" driver.
The major benefit is that the watchdog's clock rate and parent can now
be specified from within devicetree, instead of hardcoded in the driver.
Also, this driver won't poke anymore into the TCU registers to
enable/disable the clock, as this is now handled by the TCU driver.
On the bad side, we break the ABI with devicetree - as we now request a
different clock. In this very specific case it is still okay, as every
Ingenic JZ47xx-based board out there compile the devicetree within the
kernel; so it's still time to push breaking changes, in order to get a
clean devicetree that won't break once it musn't.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---
drivers/watchdog/Kconfig | 2 +
drivers/watchdog/jz4740_wdt.c | 86 +++++++++++++++++--------------------------
2 files changed, 36 insertions(+), 52 deletions(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 242eea859637..69b3b023c863 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1546,7 +1546,9 @@ config INDYDOG
config JZ4740_WDT
tristate "Ingenic jz4740 SoC hardware watchdog"
depends on MACH_JZ4740 || MACH_JZ4780
+ depends on COMMON_CLK
select WATCHDOG_CORE
+ select INGENIC_TIMER
help
Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
index ec4d99a830ba..1d504ecf45e1 100644
--- a/drivers/watchdog/jz4740_wdt.c
+++ b/drivers/watchdog/jz4740_wdt.c
@@ -26,25 +26,9 @@
#include <linux/err.h>
#include <linux/of.h>
-#include <asm/mach-jz4740/timer.h>
-
#define JZ_REG_WDT_TIMER_DATA 0x0
#define JZ_REG_WDT_COUNTER_ENABLE 0x4
#define JZ_REG_WDT_TIMER_COUNTER 0x8
-#define JZ_REG_WDT_TIMER_CONTROL 0xC
-
-#define JZ_WDT_CLOCK_PCLK 0x1
-#define JZ_WDT_CLOCK_RTC 0x2
-#define JZ_WDT_CLOCK_EXT 0x4
-
-#define JZ_WDT_CLOCK_DIV_SHIFT 3
-
-#define JZ_WDT_CLOCK_DIV_1 (0 << JZ_WDT_CLOCK_DIV_SHIFT)
-#define JZ_WDT_CLOCK_DIV_4 (1 << JZ_WDT_CLOCK_DIV_SHIFT)
-#define JZ_WDT_CLOCK_DIV_16 (2 << JZ_WDT_CLOCK_DIV_SHIFT)
-#define JZ_WDT_CLOCK_DIV_64 (3 << JZ_WDT_CLOCK_DIV_SHIFT)
-#define JZ_WDT_CLOCK_DIV_256 (4 << JZ_WDT_CLOCK_DIV_SHIFT)
-#define JZ_WDT_CLOCK_DIV_1024 (5 << JZ_WDT_CLOCK_DIV_SHIFT)
#define DEFAULT_HEARTBEAT 5
#define MAX_HEARTBEAT 2048
@@ -65,7 +49,8 @@ MODULE_PARM_DESC(heartbeat,
struct jz4740_wdt_drvdata {
struct watchdog_device wdt;
void __iomem *base;
- struct clk *rtc_clk;
+ struct clk *clk;
+ unsigned long clk_rate;
};
static int jz4740_wdt_ping(struct watchdog_device *wdt_dev)
@@ -80,31 +65,12 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
unsigned int new_timeout)
{
struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
- unsigned int rtc_clk_rate;
- unsigned int timeout_value;
- unsigned short clock_div = JZ_WDT_CLOCK_DIV_1;
-
- rtc_clk_rate = clk_get_rate(drvdata->rtc_clk);
-
- timeout_value = rtc_clk_rate * new_timeout;
- while (timeout_value > 0xffff) {
- if (clock_div == JZ_WDT_CLOCK_DIV_1024) {
- /* Requested timeout too high;
- * use highest possible value. */
- timeout_value = 0xffff;
- break;
- }
- timeout_value >>= 2;
- clock_div += (1 << JZ_WDT_CLOCK_DIV_SHIFT);
- }
+ u16 timeout_value = (u16)(drvdata->clk_rate * new_timeout);
writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
- writew(clock_div, drvdata->base + JZ_REG_WDT_TIMER_CONTROL);
writew((u16)timeout_value, drvdata->base + JZ_REG_WDT_TIMER_DATA);
writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER);
- writew(clock_div | JZ_WDT_CLOCK_RTC,
- drvdata->base + JZ_REG_WDT_TIMER_CONTROL);
writeb(0x1, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
@@ -114,7 +80,13 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
static int jz4740_wdt_start(struct watchdog_device *wdt_dev)
{
- jz4740_timer_enable_watchdog();
+ struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+ int ret;
+
+ ret = clk_prepare_enable(drvdata->clk);
+ if (ret)
+ return ret;
+
jz4740_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
return 0;
@@ -125,7 +97,7 @@ static int jz4740_wdt_stop(struct watchdog_device *wdt_dev)
struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
- jz4740_timer_disable_watchdog();
+ clk_disable_unprepare(drvdata->clk);
return 0;
}
@@ -163,26 +135,42 @@ MODULE_DEVICE_TABLE(of, jz4740_wdt_of_matches);
static int jz4740_wdt_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
struct jz4740_wdt_drvdata *drvdata;
struct watchdog_device *jz4740_wdt;
struct resource *res;
+ long rate;
int ret;
- drvdata = devm_kzalloc(&pdev->dev, sizeof(struct jz4740_wdt_drvdata),
- GFP_KERNEL);
+ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
if (!drvdata)
return -ENOMEM;
- if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
- heartbeat = DEFAULT_HEARTBEAT;
+ drvdata->clk = devm_clk_get(&pdev->dev, "wdt");
+ if (IS_ERR(drvdata->clk)) {
+ dev_err(&pdev->dev, "cannot find WDT clock\n");
+ return PTR_ERR(drvdata->clk);
+ }
+
+ /* Set smallest clock possible */
+ rate = clk_round_rate(drvdata->clk, 1);
+ if (rate < 0)
+ return rate;
+ ret = clk_set_rate(drvdata->clk, rate);
+ if (ret)
+ return ret;
+
+ drvdata->clk_rate = rate;
jz4740_wdt = &drvdata->wdt;
jz4740_wdt->info = &jz4740_wdt_info;
jz4740_wdt->ops = &jz4740_wdt_ops;
- jz4740_wdt->timeout = heartbeat;
jz4740_wdt->min_timeout = 1;
- jz4740_wdt->max_timeout = MAX_HEARTBEAT;
- jz4740_wdt->parent = &pdev->dev;
+ jz4740_wdt->max_timeout = 0xffff / rate;
+ jz4740_wdt->timeout = clamp(heartbeat,
+ jz4740_wdt->min_timeout,
+ jz4740_wdt->max_timeout);
+ jz4740_wdt->parent = dev;
watchdog_set_nowayout(jz4740_wdt, nowayout);
watchdog_set_drvdata(jz4740_wdt, drvdata);
@@ -191,12 +179,6 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
if (IS_ERR(drvdata->base))
return PTR_ERR(drvdata->base);
- drvdata->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
- if (IS_ERR(drvdata->rtc_clk)) {
- dev_err(&pdev->dev, "cannot find RTC clock\n");
- return PTR_ERR(drvdata->rtc_clk);
- }
-
ret = devm_watchdog_register_device(&pdev->dev, &drvdata->wdt);
if (ret < 0)
return ret;
--
2.11.0
next prev parent reply other threads:[~2019-03-27 23:17 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-27 23:16 [PATCH v11 00/27] Ingenic JZ47xx TCU pachset v11 Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 01/27] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 02/27] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 03/27] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 04/27] clocksource: Add a new timer-ingenic driver Paul Cercueil
2019-04-05 20:44 ` Thomas Gleixner
2019-03-27 23:16 ` [PATCH v11 05/27] clocksource: Add driver for the Ingenic JZ47xx OST Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 06/27] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
2019-03-28 1:29 ` Joe Perches
2019-03-27 23:16 ` Paul Cercueil [this message]
2019-03-27 23:16 ` [PATCH v11 08/27] watchdog: jz4740: Use regmap provided by TCU driver Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 09/27] watchdog: jz4740: Avoid starting watchdog in set_timeout Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 10/27] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 11/27] pwm: jz4740: Apply configuration atomically Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 12/27] pwm: jz4740: Use regmap from TCU driver Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 13/27] pwm: jz4740: Use clocks " Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 14/27] pwm: jz4740: Improve algorithm of clock calculation Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 15/27] pwm: jz4740: Allow selection of PWM channels 0 and 1 Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 16/27] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 17/27] pwm: jz4740: Remove unused devicetree compatible strings Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 18/27] clk: jz4740: Add TCU clock Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 19/27] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 20/27] MIPS: jz4740: Add DTS nodes for the TCU drivers Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 21/27] MIPS: qi_lb60: Move PWM devices to devicetree Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 22/27] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 23/27] MIPS: CI20: Reduce system timer and clocksource to 3 MHz Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 24/27] MIPS: CI20: defconfig: enable OST driver Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 25/27] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 26/27] MIPS: GCW0: defconfig: Enable OST, watchdog, PWM drivers Paul Cercueil
2019-03-27 23:16 ` [PATCH v11 27/27] MIPS: jz4740: Drop obsolete code Paul Cercueil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190327231631.15708-8-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=corbet@lwn.net \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jhogan@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=malat@debian.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=od@zcrc.me \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®