From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Matt Redfearn <matt.redfearn@thinci.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>,
Philippe Cornu <philippe.cornu@st.com>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
Matthew Redfearn <matthew.redfearn@thinci.com>,
Nickey Yang <nickey.yang@rock-chips.com>,
Heiko Stuebner <heiko@sntech.de>,
Archit Taneja <architt@codeaurora.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>
Subject: Re: [PATCH] drm/bridge/synopsys: dsi: Allow VPG to be enabled via debugfs
Date: Thu, 25 Apr 2019 12:31:18 +0300 [thread overview]
Message-ID: <20190425093118.GC4557@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20190424142205.26088-1-matt.redfearn@thinci.com>
On Wed, Apr 24, 2019 at 02:22:18PM +0000, Matt Redfearn wrote:
> The Synopsys MIPI DSI IP contains a video test pattern generator which
> is helpful in debugging video timing with connected displays.
> Add a debugfs directory containing files which allow the VPG to be
> enabled and disabled, and it's orientation to be changed.
s/it's/its/
>
> Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>
>
> ---
>
> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 55 +++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> index 0ee440216b8..a1ee2306382 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -10,6 +10,7 @@
>
> #include <linux/clk.h>
> #include <linux/component.h>
> +#include <linux/debugfs.h>
> #include <linux/iopoll.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> @@ -86,6 +87,8 @@
> #define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS 0x1
> #define VID_MODE_TYPE_BURST 0x2
> #define VID_MODE_TYPE_MASK 0x3
> +#define VID_MODE_VPG_ENABLE BIT(16)
> +#define VID_MODE_VPG_HORIZONTAL BIT(24)
>
> #define DSI_VID_PKT_SIZE 0x3c
> #define VID_PKT_SIZE(p) ((p) & 0x3fff)
> @@ -234,6 +237,15 @@ struct dw_mipi_dsi {
> u32 format;
> unsigned long mode_flags;
>
> +#ifdef CONFIG_DEBUG_FS
> + struct dentry *debugfs_root;
> + struct dentry *debugfs_vpg;
> + struct dentry *debugfs_vpg_horizontal;
> +
> + bool vpg;
> + bool vpg_horizontal;
> +#endif /* CONFIG_DEBUG_FS */
> +
> struct dw_mipi_dsi *master; /* dual-dsi master ptr */
> struct dw_mipi_dsi *slave; /* dual-dsi slave ptr */
>
> @@ -525,6 +537,11 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
> else
> val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
>
> + if (dsi->vpg) {
Won't this break if CONFIG_DDEBUG_FS is not defined ?
> + val |= VID_MODE_VPG_ENABLE;
> + val |= dsi->vpg_horizontal ? VID_MODE_VPG_HORIZONTAL : 0;
> + }
> +
> dsi_write(dsi, DSI_VID_MODE_CFG, val);
> }
>
> @@ -935,6 +952,41 @@ static const struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
> .attach = dw_mipi_dsi_bridge_attach,
> };
>
> +#ifdef CONFIG_DEBUG_FS
> +
> +static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi)
> +{
> + struct dentry *d;
> +
> + d = debugfs_create_dir(dev_name(dsi->dev), NULL);
> + if (IS_ERR(d)) {
> + dev_err(dsi->dev, "failed to create debugfs root\n");
> + return;
> + }
> + dsi->debugfs_root = d;
> +
> + d = debugfs_create_bool("vpg", 0660, dsi->debugfs_root, &dsi->vpg);
> + dsi->debugfs_vpg = d;
If you don't handle failures here you don't need the intermediate d
variable, you can just assign dsi->debugfs_vpg directly.
> +
> + d = debugfs_create_bool("vpg_horizontal", 0660, dsi->debugfs_root,
> + &dsi->vpg_horizontal);
> + dsi->debugfs_vpg_horizontal = d;
Same here.
> +}
> +
> +static void dw_mipi_dsi_debugfs_remove(struct dw_mipi_dsi *dsi)
> +{
> + debugfs_remove(dsi->debugfs_vpg_horizontal);
> + debugfs_remove(dsi->debugfs_vpg);
> + debugfs_remove(dsi->debugfs_root);
> +}
> +
> +#else
> +
> +static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi) { }
> +static void dw_mipi_dsi_debugfs_remove(struct dw_mipi_dsi *dsi) { }
> +
> +#endif /* CONFIG_DEBUG_FS */
> +
> static struct dw_mipi_dsi *
> __dw_mipi_dsi_probe(struct platform_device *pdev,
> const struct dw_mipi_dsi_plat_data *plat_data)
> @@ -1005,6 +1057,7 @@ __dw_mipi_dsi_probe(struct platform_device *pdev,
> clk_disable_unprepare(dsi->pclk);
> }
>
> + dw_mipi_dsi_debugfs_init(dsi);
> pm_runtime_enable(dev);
>
> dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
> @@ -1012,6 +1065,7 @@ __dw_mipi_dsi_probe(struct platform_device *pdev,
> ret = mipi_dsi_host_register(&dsi->dsi_host);
> if (ret) {
> dev_err(dev, "Failed to register MIPI host: %d\n", ret);
> + dw_mipi_dsi_debugfs_remove(dsi);
> return ERR_PTR(ret);
> }
>
> @@ -1029,6 +1083,7 @@ static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
> mipi_dsi_host_unregister(&dsi->dsi_host);
>
> pm_runtime_disable(dsi->dev);
> + dw_mipi_dsi_debugfs_remove(dsi);
> }
>
> void dw_mipi_dsi_set_slave(struct dw_mipi_dsi *dsi, struct dw_mipi_dsi *slave)
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2019-04-25 9:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-24 14:22 Matt Redfearn
2019-04-25 9:31 ` Laurent Pinchart [this message]
2019-04-25 12:42 ` Matt Redfearn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190425093118.GC4557@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=airlied@linux.ie \
--cc=architt@codeaurora.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=linux-kernel@vger.kernel.org \
--cc=matt.redfearn@thinci.com \
--cc=matthew.redfearn@thinci.com \
--cc=nickey.yang@rock-chips.com \
--cc=philippe.cornu@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®