From: Matt Redfearn <matt.redfearn@thinci.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Archit Taneja <architt@codeaurora.org>,
David Airlie <airlied@linux.ie>,
Philippe Cornu <philippe.cornu@st.com>,
Matthew Redfearn <matthew.redfearn@thinci.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Nickey Yang <nickey.yang@rock-chips.com>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH] drm/bridge/synopsys: dsi: Allow VPG to be enabled via debugfs
Date: Thu, 25 Apr 2019 12:42:48 +0000 [thread overview]
Message-ID: <ac0b01b5-de42-727c-cee4-15371df56474@thinci.com> (raw)
In-Reply-To: <20190425093118.GC4557@pendragon.ideasonboard.com>
Hi Laurent,
Thanks for the review!
On 25/04/2019 10:31, Laurent Pinchart wrote:
> On Wed, Apr 24, 2019 at 02:22:18PM +0000, Matt Redfearn wrote:
>> The Synopsys MIPI DSI IP contains a video test pattern generator which
>> is helpful in debugging video timing with connected displays.
>> Add a debugfs directory containing files which allow the VPG to be
>> enabled and disabled, and it's orientation to be changed.
>
> s/it's/its/
>>
>> Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>
>>
>> ---
>>
>> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 55 +++++++++++++++++++
>> 1 file changed, 55 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> index 0ee440216b8..a1ee2306382 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> @@ -10,6 +10,7 @@
>>
>> #include <linux/clk.h>
>> #include <linux/component.h>
>> +#include <linux/debugfs.h>
>> #include <linux/iopoll.h>
>> #include <linux/module.h>
>> #include <linux/of_device.h>
>> @@ -86,6 +87,8 @@
>> #define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS 0x1
>> #define VID_MODE_TYPE_BURST 0x2
>> #define VID_MODE_TYPE_MASK 0x3
>> +#define VID_MODE_VPG_ENABLE BIT(16)
>> +#define VID_MODE_VPG_HORIZONTAL BIT(24)
>>
>> #define DSI_VID_PKT_SIZE 0x3c
>> #define VID_PKT_SIZE(p) ((p) & 0x3fff)
>> @@ -234,6 +237,15 @@ struct dw_mipi_dsi {
>> u32 format;
>> unsigned long mode_flags;
>>
>> +#ifdef CONFIG_DEBUG_FS
>> + struct dentry *debugfs_root;
>> + struct dentry *debugfs_vpg;
>> + struct dentry *debugfs_vpg_horizontal;
>> +
>> + bool vpg;
>> + bool vpg_horizontal;
>> +#endif /* CONFIG_DEBUG_FS */
>> +
>> struct dw_mipi_dsi *master; /* dual-dsi master ptr */
>> struct dw_mipi_dsi *slave; /* dual-dsi slave ptr */
>>
>> @@ -525,6 +537,11 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
>> else
>> val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
>>
>> + if (dsi->vpg) {
>
> Won't this break if CONFIG_DDEBUG_FS is not defined ?
Ah yes - quite right.
>
>> + val |= VID_MODE_VPG_ENABLE;
>> + val |= dsi->vpg_horizontal ? VID_MODE_VPG_HORIZONTAL : 0;
>> + }
>> +
>> dsi_write(dsi, DSI_VID_MODE_CFG, val);
>> }
>>
>> @@ -935,6 +952,41 @@ static const struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
>> .attach = dw_mipi_dsi_bridge_attach,
>> };
>>
>> +#ifdef CONFIG_DEBUG_FS
>> +
>> +static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi)
>> +{
>> + struct dentry *d;
>> +
>> + d = debugfs_create_dir(dev_name(dsi->dev), NULL);
>> + if (IS_ERR(d)) {
>> + dev_err(dsi->dev, "failed to create debugfs root\n");
>> + return;
>> + }
>> + dsi->debugfs_root = d;
>> +
>> + d = debugfs_create_bool("vpg", 0660, dsi->debugfs_root, &dsi->vpg);
>> + dsi->debugfs_vpg = d;
>
> If you don't handle failures here you don't need the intermediate d
> variable, you can just assign dsi->debugfs_vpg directly.
True - I will update it.
>
>> +
>> + d = debugfs_create_bool("vpg_horizontal", 0660, dsi->debugfs_root,
>> + &dsi->vpg_horizontal);
>> + dsi->debugfs_vpg_horizontal = d;
>
> Same here.
And here - thanks!
Matt
>
>> +}
>> +
>> +static void dw_mipi_dsi_debugfs_remove(struct dw_mipi_dsi *dsi)
>> +{
>> + debugfs_remove(dsi->debugfs_vpg_horizontal);
>> + debugfs_remove(dsi->debugfs_vpg);
>> + debugfs_remove(dsi->debugfs_root);
>> +}
>> +
>> +#else
>> +
>> +static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi) { }
>> +static void dw_mipi_dsi_debugfs_remove(struct dw_mipi_dsi *dsi) { }
>> +
>> +#endif /* CONFIG_DEBUG_FS */
>> +
>> static struct dw_mipi_dsi *
>> __dw_mipi_dsi_probe(struct platform_device *pdev,
>> const struct dw_mipi_dsi_plat_data *plat_data)
>> @@ -1005,6 +1057,7 @@ __dw_mipi_dsi_probe(struct platform_device *pdev,
>> clk_disable_unprepare(dsi->pclk);
>> }
>>
>> + dw_mipi_dsi_debugfs_init(dsi);
>> pm_runtime_enable(dev);
>>
>> dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
>> @@ -1012,6 +1065,7 @@ __dw_mipi_dsi_probe(struct platform_device *pdev,
>> ret = mipi_dsi_host_register(&dsi->dsi_host);
>> if (ret) {
>> dev_err(dev, "Failed to register MIPI host: %d\n", ret);
>> + dw_mipi_dsi_debugfs_remove(dsi);
>> return ERR_PTR(ret);
>> }
>>
>> @@ -1029,6 +1083,7 @@ static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
>> mipi_dsi_host_unregister(&dsi->dsi_host);
>>
>> pm_runtime_disable(dsi->dev);
>> + dw_mipi_dsi_debugfs_remove(dsi);
>> }
>>
>> void dw_mipi_dsi_set_slave(struct dw_mipi_dsi *dsi, struct dw_mipi_dsi *slave)
>
prev parent reply other threads:[~2019-04-25 12:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-24 14:22 Matt Redfearn
2019-04-25 9:31 ` Laurent Pinchart
2019-04-25 12:42 ` Matt Redfearn [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ac0b01b5-de42-727c-cee4-15371df56474@thinci.com \
--to=matt.redfearn@thinci.com \
--cc=airlied@linux.ie \
--cc=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=matthew.redfearn@thinci.com \
--cc=nickey.yang@rock-chips.com \
--cc=philippe.cornu@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®