* [PATCH v2] arm64: dts: imx8mq: Add sai3 and sai6 nodes
@ 2019-07-02 13:11 Andra Danciu
2019-07-02 13:14 ` Daniel Baluta
0 siblings, 1 reply; 2+ messages in thread
From: Andra Danciu @ 2019-07-02 13:11 UTC (permalink / raw)
To: shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, festevam, linux-imx,
l.stach, abel.vesa, Anson.Huang, andrew.smirnov, angus, ccaione,
agx, devicetree, linux-arm-kernel, linux-kernel
SAI3 and SAI6 nodes are used to connect to an external codec.
They have 1 Tx and 1 Rx dataline.
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Andra Danciu <andradanciu1997@gmail.com>
---
Changes since v1:
- Added sai3 node because we need it to enable audio on pico-pi-8m
- Added commit description
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index d09b808eff87..2d489c5cdc26 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -278,6 +278,20 @@
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
+ sai6: sai@30030000 {
+ compatible = "fsl,imx8mq-sai",
+ "fsl,imx6sx-sai";
+ reg = <0x30030000 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
+ <&clk IMX8MQ_CLK_SAI6_ROOT>,
+ <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
gpio1: gpio@30200000 {
compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
reg = <0x30200000 0x10000>;
@@ -728,6 +742,22 @@
status = "disabled";
};
+ sai3: sai@308c0000 {
+ compatible = "fsl,imx8mq-sai",
+ "fsl,imx6sx-sai";
+ reg = <0x308c0000 0x10000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
+ <&clk IMX8MQ_CLK_DUMMY>,
+ <&clk IMX8MQ_CLK_SAI3_ROOT>,
+ <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+
i2c1: i2c@30a20000 {
compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
reg = <0x30a20000 0x10000>;
--
2.11.0
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH v2] arm64: dts: imx8mq: Add sai3 and sai6 nodes
2019-07-02 13:11 [PATCH v2] arm64: dts: imx8mq: Add sai3 and sai6 nodes Andra Danciu
@ 2019-07-02 13:14 ` Daniel Baluta
0 siblings, 0 replies; 2+ messages in thread
From: Daniel Baluta @ 2019-07-02 13:14 UTC (permalink / raw)
To: Andra Danciu
Cc: Shawn Guo, Rob Herring, Mark Rutland, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, dl-linux-imx,
Lucas Stach, Abel Vesa, Anson Huang, andrew.smirnov,
Angus Ainslie (Purism),
Carlo Caione, Guido Günther, Devicetree List,
linux-arm-kernel, Linux Kernel Mailing List
Looks better now. One comment inline:
On Tue, Jul 2, 2019 at 4:12 PM Andra Danciu <andradanciu1997@gmail.com> wrote:
>
> SAI3 and SAI6 nodes are used to connect to an external codec.
> They have 1 Tx and 1 Rx dataline.
>
> Cc: Daniel Baluta <daniel.baluta@nxp.com>
> Signed-off-by: Andra Danciu <andradanciu1997@gmail.com>
> ---
> Changes since v1:
> - Added sai3 node because we need it to enable audio on pico-pi-8m
> - Added commit description
>
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index d09b808eff87..2d489c5cdc26 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -278,6 +278,20 @@
> #size-cells = <1>;
> ranges = <0x30000000 0x30000000 0x400000>;
>
> + sai6: sai@30030000 {
> + compatible = "fsl,imx8mq-sai",
> + "fsl,imx6sx-sai";
> + reg = <0x30030000 0x10000>;
> + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
> + <&clk IMX8MQ_CLK_SAI6_ROOT>,
> + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> gpio1: gpio@30200000 {
> compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
> reg = <0x30200000 0x10000>;
> @@ -728,6 +742,22 @@
> status = "disabled";
> };
>
> + sai3: sai@308c0000 {
> + compatible = "fsl,imx8mq-sai",
> + "fsl,imx6sx-sai";
> + reg = <0x308c0000 0x10000>;
> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
> + <&clk IMX8MQ_CLK_DUMMY>,
> + <&clk IMX8MQ_CLK_SAI3_ROOT>,
> + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> +
Please don't use multiple blank lines here.
> i2c1: i2c@30a20000 {
> compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
> reg = <0x30a20000 0x10000>;
> --
> 2.11.0
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-07-02 13:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-02 13:11 [PATCH v2] arm64: dts: imx8mq: Add sai3 and sai6 nodes Andra Danciu
2019-07-02 13:14 ` Daniel Baluta
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®