* [PATCH] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes
@ 2019-08-24 0:27 Andrey Smirnov
2019-08-25 7:18 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Andrey Smirnov @ 2019-08-24 0:27 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Andrey Smirnov, Shawn Guo, Chris Healy, Cory Tusar,
Fabio Estevam, linux-kernel
The devicetree specification recommends using generic node names.
Some ZII dts files already follow such recommendation, but some don't,
so use generic node names for consistency among the ZII dts files.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index 45a978defbdc..6edd682dbd29 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -417,7 +417,7 @@
pinctrl-0 = <&pinctrl_dspi1>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
@@ -430,7 +430,7 @@
};
};
- spi-flash@1 {
+ flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
@@ -519,7 +519,7 @@
#gpio-cells = <2>;
};
- lm75@48 {
+ temp-sensor@48 {
compatible = "national,lm75";
reg = <0x48>;
};
@@ -534,7 +534,7 @@
reg = <0x52>;
};
- ds1682@6b {
+ elapsed-time-recorder@6b {
compatible = "dallas,ds1682";
reg = <0x6b>;
};
@@ -551,7 +551,7 @@
reg = <0x38>;
};
- adt7411@4a {
+ adc@4a {
compatible = "adi,adt7411";
reg = <0x4a>;
};
@@ -563,7 +563,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- gpio9: sx1503q@20 {
+ gpio9: io-expander@20 {
compatible = "semtech,sx1503q";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sx1503_20>;
@@ -574,12 +574,12 @@
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
};
- lm75@4e {
+ temp-sensor@4e {
compatible = "national,lm75";
reg = <0x4e>;
};
- lm75@4f {
+ temp-sensor@4f {
compatible = "national,lm75";
reg = <0x4f>;
};
@@ -591,17 +591,17 @@
reg = <0x23>;
};
- adt7411@4a {
+ adc@4a {
compatible = "adi,adt7411";
reg = <0x4a>;
};
- at24c08@54 {
+ eeprom@54 {
compatible = "atmel,24c08";
reg = <0x54>;
};
- tca9548@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9548";
pinctrl-names = "default";
#address-cells = <1>;
@@ -639,7 +639,7 @@
};
};
- tca9548@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9548";
pinctrl-names = "default";
reg = <0x71>;
--
2.21.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes
2019-08-24 0:27 [PATCH] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes Andrey Smirnov
@ 2019-08-25 7:18 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2019-08-25 7:18 UTC (permalink / raw)
To: Andrey Smirnov
Cc: linux-arm-kernel, Chris Healy, Cory Tusar, Fabio Estevam, linux-kernel
On Fri, Aug 23, 2019 at 05:27:47PM -0700, Andrey Smirnov wrote:
> The devicetree specification recommends using generic node names.
>
> Some ZII dts files already follow such recommendation, but some don't,
> so use generic node names for consistency among the ZII dts files.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Cory Tusar <cory.tusar@zii.aero>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
It doesn't apply to my branch.
Shawn
> ---
> arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> index 45a978defbdc..6edd682dbd29 100644
> --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> @@ -417,7 +417,7 @@
> pinctrl-0 = <&pinctrl_dspi1>;
> status = "okay";
>
> - spi-flash@0 {
> + flash@0 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "jedec,spi-nor";
> @@ -430,7 +430,7 @@
> };
> };
>
> - spi-flash@1 {
> + flash@1 {
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "jedec,spi-nor";
> @@ -519,7 +519,7 @@
> #gpio-cells = <2>;
> };
>
> - lm75@48 {
> + temp-sensor@48 {
> compatible = "national,lm75";
> reg = <0x48>;
> };
> @@ -534,7 +534,7 @@
> reg = <0x52>;
> };
>
> - ds1682@6b {
> + elapsed-time-recorder@6b {
> compatible = "dallas,ds1682";
> reg = <0x6b>;
> };
> @@ -551,7 +551,7 @@
> reg = <0x38>;
> };
>
> - adt7411@4a {
> + adc@4a {
> compatible = "adi,adt7411";
> reg = <0x4a>;
> };
> @@ -563,7 +563,7 @@
> pinctrl-0 = <&pinctrl_i2c2>;
> status = "okay";
>
> - gpio9: sx1503q@20 {
> + gpio9: io-expander@20 {
> compatible = "semtech,sx1503q";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_sx1503_20>;
> @@ -574,12 +574,12 @@
> interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
> };
>
> - lm75@4e {
> + temp-sensor@4e {
> compatible = "national,lm75";
> reg = <0x4e>;
> };
>
> - lm75@4f {
> + temp-sensor@4f {
> compatible = "national,lm75";
> reg = <0x4f>;
> };
> @@ -591,17 +591,17 @@
> reg = <0x23>;
> };
>
> - adt7411@4a {
> + adc@4a {
> compatible = "adi,adt7411";
> reg = <0x4a>;
> };
>
> - at24c08@54 {
> + eeprom@54 {
> compatible = "atmel,24c08";
> reg = <0x54>;
> };
>
> - tca9548@70 {
> + i2c-mux@70 {
> compatible = "nxp,pca9548";
> pinctrl-names = "default";
> #address-cells = <1>;
> @@ -639,7 +639,7 @@
> };
> };
>
> - tca9548@71 {
> + i2c-mux@71 {
> compatible = "nxp,pca9548";
> pinctrl-names = "default";
> reg = <0x71>;
> --
> 2.21.0
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-08-25 7:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-24 0:27 [PATCH] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes Andrey Smirnov
2019-08-25 7:18 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®