* [PATCH v3 11/49] Input: atmel_mxt_ts - implement support for T107 active stylus
2019-09-17 9:36 [PATCH v3 10/49] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
@ 2019-09-17 9:36 ` Jiada Wang
2019-09-17 9:36 ` [PATCH v3 12/49] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Jiada Wang @ 2019-09-17 9:36 UTC (permalink / raw)
To: nick, dmitry.torokhov, jikos, benjamin.tissoires, rydberg
Cc: linux-input, linux-kernel, jiada_wang
From: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit 20e357dd9acf8c2040068c8b22d6bc1401a1893f)
[gdavis: Forward port and fix conflicts due to applying upstream commit
96a938aa214e ("Input: atmel_mxt_ts - remove platform data
support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 117 ++++++++++++++++++++++-
1 file changed, 113 insertions(+), 4 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 83dad225458e..4e237209cb34 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -72,6 +72,7 @@
#define MXT_SPT_CTECONFIG_T46 46
#define MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71 71
#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
+#define MXT_PROCI_ACTIVESTYLUS_T107 107
/* MXT_GEN_MESSAGE_T5 object */
#define MXT_RPTID_NOMSG 0xff
@@ -181,6 +182,7 @@ struct t37_debug {
enum t100_type {
MXT_T100_TYPE_FINGER = 1,
MXT_T100_TYPE_PASSIVE_STYLUS = 2,
+ MXT_T100_TYPE_ACTIVE_STYLUS = 3,
MXT_T100_TYPE_HOVERING_FINGER = 4,
MXT_T100_TYPE_GLOVE = 5,
MXT_T100_TYPE_LARGE_TOUCH = 6,
@@ -192,6 +194,16 @@ enum t100_type {
#define MXT_TOUCH_MAJOR_DEFAULT 1
#define MXT_PRESSURE_DEFAULT 1
+/* Gen2 Active Stylus */
+#define MXT_T107_STYLUS_STYAUX 42
+#define MXT_T107_STYLUS_STYAUX_PRESSURE BIT(0)
+#define MXT_T107_STYLUS_STYAUX_PEAK BIT(4)
+
+#define MXT_T107_STYLUS_HOVER BIT(0)
+#define MXT_T107_STYLUS_TIPSWITCH BIT(1)
+#define MXT_T107_STYLUS_BUTTON0 BIT(2)
+#define MXT_T107_STYLUS_BUTTON1 BIT(3)
+
/* Delay times */
#define MXT_BACKUP_TIME 50 /* msec */
#define MXT_RESET_GPIO_TIME 20 /* msec */
@@ -313,10 +325,12 @@ struct mxt_data {
struct t7_config t7_cfg;
struct mxt_dbg dbg;
struct gpio_desc *reset_gpio;
- bool use_retrigen_workaround;
unsigned long t15_keystatus;
int t15_num_keys;
const unsigned int *t15_keymap;
+ u8 stylus_aux_pressure;
+ u8 stylus_aux_peak;
+ bool use_retrigen_workaround;
/* Cached parameters from object table */
u16 T5_address;
@@ -337,6 +351,7 @@ struct mxt_data {
u8 T48_reportid;
u8 T100_reportid_min;
u8 T100_reportid_max;
+ u16 T107_address;
/* for fw update in bootloader */
struct completion bl_completion;
@@ -908,6 +923,8 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
u8 major = 0;
u8 pressure = 0;
u8 orientation = 0;
+ bool active = false;
+ bool hover = false;
id = message[0] - data->T100_reportid_min - 2;
@@ -926,6 +943,8 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
case MXT_T100_TYPE_HOVERING_FINGER:
tool = MT_TOOL_FINGER;
distance = MXT_DISTANCE_HOVERING;
+ hover = true;
+ active = true;
if (data->t100_aux_vect)
orientation = message[data->t100_aux_vect];
@@ -936,6 +955,8 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
case MXT_T100_TYPE_GLOVE:
tool = MT_TOOL_FINGER;
distance = MXT_DISTANCE_ACTIVE_TOUCH;
+ hover = false;
+ active = true;
if (data->t100_aux_area)
major = message[data->t100_aux_area];
@@ -950,6 +971,9 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
case MXT_T100_TYPE_PASSIVE_STYLUS:
tool = MT_TOOL_PEN;
+ distance = MXT_DISTANCE_ACTIVE_TOUCH;
+ hover = false;
+ active = true;
/*
* Passive stylus is reported with size zero so
@@ -962,6 +986,31 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
break;
+ case MXT_T100_TYPE_ACTIVE_STYLUS:
+ /* Report input buttons */
+ input_report_key(input_dev, BTN_STYLUS,
+ message[6] & MXT_T107_STYLUS_BUTTON0);
+ input_report_key(input_dev, BTN_STYLUS2,
+ message[6] & MXT_T107_STYLUS_BUTTON1);
+
+ /* stylus in range, but position unavailable */
+ if (!(message[6] & MXT_T107_STYLUS_HOVER))
+ break;
+
+ tool = MT_TOOL_PEN;
+ distance = MXT_DISTANCE_ACTIVE_TOUCH;
+ active = true;
+ major = MXT_TOUCH_MAJOR_DEFAULT;
+
+ if (!(message[6] & MXT_T107_STYLUS_TIPSWITCH)) {
+ hover = true;
+ distance = MXT_DISTANCE_HOVERING;
+ } else if (data->stylus_aux_pressure) {
+ pressure = message[data->stylus_aux_pressure];
+ }
+
+ break;
+
case MXT_T100_TYPE_LARGE_TOUCH:
/* Ignore suppressed touch */
break;
@@ -976,12 +1025,12 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
* Values reported should be non-zero if tool is touching the
* device
*/
- if (!pressure && type != MXT_T100_TYPE_HOVERING_FINGER)
+ if (!pressure && !hover)
pressure = MXT_PRESSURE_DEFAULT;
input_mt_slot(input_dev, id);
- if (status & MXT_T100_DETECT) {
+ if (active) {
dev_dbg(dev, "[%u] type:%u x:%u y:%u a:%02X p:%02X v:%02X\n",
id, type, x, y, major, pressure, orientation);
@@ -992,6 +1041,7 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
input_report_abs(input_dev, ABS_MT_DISTANCE, distance);
input_report_abs(input_dev, ABS_MT_ORIENTATION, orientation);
+
} else {
dev_dbg(dev, "[%u] release\n", id);
@@ -1863,6 +1913,9 @@ static int mxt_parse_object_table(struct mxt_data *data,
/* first two report IDs reserved */
data->num_touchids = object->num_report_ids - 2;
break;
+ case MXT_PROCI_ACTIVESTYLUS_T107:
+ data->T107_address = object->start_address;
+ break;
}
end_address = object->start_address
@@ -2023,6 +2076,54 @@ static int mxt_read_t9_resolution(struct mxt_data *data)
return 0;
}
+static int mxt_set_up_active_stylus(struct input_dev *input_dev,
+ struct mxt_data *data)
+{
+ struct i2c_client *client = data->client;
+ int error;
+ struct mxt_object *object;
+ u8 styaux;
+ int aux;
+ u8 ctrl;
+
+ object = mxt_get_object(data, MXT_PROCI_ACTIVESTYLUS_T107);
+ if (!object)
+ return 0;
+
+ error = __mxt_read_reg(client, object->start_address, 1, &ctrl);
+ if (error)
+ return error;
+
+ /* Check enable bit */
+ if (!(ctrl & 0x01))
+ return 0;
+
+ error = __mxt_read_reg(client,
+ object->start_address + MXT_T107_STYLUS_STYAUX,
+ 1, &styaux);
+ if (error)
+ return error;
+
+ /* map aux bits */
+ aux = 7;
+
+ if (styaux & MXT_T107_STYLUS_STYAUX_PRESSURE)
+ data->stylus_aux_pressure = aux++;
+
+ if (styaux & MXT_T107_STYLUS_STYAUX_PEAK)
+ data->stylus_aux_peak = aux++;
+
+ input_set_capability(input_dev, EV_KEY, BTN_STYLUS);
+ input_set_capability(input_dev, EV_KEY, BTN_STYLUS2);
+ input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0);
+
+ dev_dbg(&client->dev,
+ "T107 active stylus, aux map pressure:%u peak:%u\n",
+ data->stylus_aux_pressure, data->stylus_aux_peak);
+
+ return 0;
+}
+
static int mxt_read_t100_config(struct mxt_data *data)
{
struct i2c_client *client = data->client;
@@ -2229,7 +2330,7 @@ static int mxt_initialize_input_device(struct mxt_data *data)
if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
(data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
- data->t100_aux_ampl)) {
+ (data->t100_aux_ampl || data->stylus_aux_pressure))) {
input_set_abs_params(input_dev, ABS_MT_PRESSURE,
0, 255, 0, 0);
}
@@ -2247,6 +2348,14 @@ static int mxt_initialize_input_device(struct mxt_data *data)
0, 255, 0, 0);
}
+ /* For T107 Active Stylus */
+ if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+ data->T107_address) {
+ error = mxt_set_up_active_stylus(input_dev, data);
+ if (error)
+ dev_warn(dev, "Failed to read T107 config\n");
+ }
+
/* For T15 Key Array */
if (data->T15_reportid_min) {
data->t15_keystatus = 0;
--
2.19.2
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH v3 12/49] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs
2019-09-17 9:36 [PATCH v3 10/49] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2019-09-17 9:36 ` [PATCH v3 11/49] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
@ 2019-09-17 9:36 ` Jiada Wang
2019-09-17 9:36 ` [PATCH v3 13/49] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2019-09-17 9:36 ` [PATCH v3 14/49] Input: atmel_mxt_ts - add regulator control support Jiada Wang
3 siblings, 0 replies; 5+ messages in thread
From: Jiada Wang @ 2019-09-17 9:36 UTC (permalink / raw)
To: nick, dmitry.torokhov, jikos, benjamin.tissoires, rydberg
Cc: linux-input, linux-kernel, jiada_wang
From: Karl Tsou <karl.funlab@gmail.com>
output T92 gesture and T93 touch sequence messages.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit cb98986f8342107bf4a536aed4160b20839e97c1)
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 40 ++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 4e237209cb34..9dae1c2dd9d9 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -71,6 +71,8 @@
#define MXT_SPT_MESSAGECOUNT_T44 44
#define MXT_SPT_CTECONFIG_T46 46
#define MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71 71
+#define MXT_PROCI_SYMBOLGESTUREPROCESSOR 92
+#define MXT_PROCI_TOUCHSEQUENCELOGGER 93
#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
#define MXT_PROCI_ACTIVESTYLUS_T107 107
@@ -349,6 +351,10 @@ struct mxt_data {
u8 T42_reportid_max;
u16 T44_address;
u8 T48_reportid;
+ u16 T92_address;
+ u8 T92_reportid;
+ u16 T93_address;
+ u8 T93_reportid;
u8 T100_reportid_min;
u8 T100_reportid_max;
u16 T107_address;
@@ -1113,6 +1119,24 @@ static int mxt_proc_t48_messages(struct mxt_data *data, u8 *msg)
return 0;
}
+static void mxt_proc_t92_messages(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+ u8 status = msg[1];
+
+ dev_debug(dev, "T92 long stroke LSTR=%d %d\n",
+ (status & 0x80) ? 1 : 0,
+ status & 0x0F);
+}
+
+static void mxt_proc_t93_messages(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+ u8 status = msg[1];
+
+ dev_debug(dev, "T93 report double tap %d\n", status);
+}
+
static int mxt_proc_message(struct mxt_data *data, u8 *message)
{
u8 report_id = message[0];
@@ -1145,6 +1169,10 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
} else if (report_id >= data->T15_reportid_min
&& report_id <= data->T15_reportid_max) {
mxt_proc_t15_messages(data, message);
+ } else if (report_id == data->T92_reportid) {
+ mxt_proc_t92_messages(data, message);
+ } else if (report_id == data->T93_reportid) {
+ mxt_proc_t93_messages(data, message);
} else {
mxt_dump_message(data, message);
}
@@ -1814,6 +1842,10 @@ static void mxt_free_object_table(struct mxt_data *data)
data->T42_reportid_max = 0;
data->T44_address = 0;
data->T48_reportid = 0;
+ data->T92_reportid = 0;
+ data->T92_address = 0;
+ data->T93_reportid = 0;
+ data->T93_address = 0;
data->T100_reportid_min = 0;
data->T100_reportid_max = 0;
data->max_reportid = 0;
@@ -1906,6 +1938,14 @@ static int mxt_parse_object_table(struct mxt_data *data,
case MXT_PROCG_NOISESUPPRESSION_T48:
data->T48_reportid = min_id;
break;
+ case MXT_PROCI_SYMBOLGESTUREPROCESSOR:
+ data->T92_reportid = min_id;
+ data->T92_address = object->start_address;
+ break;
+ case MXT_PROCI_TOUCHSEQUENCELOGGER:
+ data->T93_reportid = min_id;
+ data->T93_address = object->start_address;
+ break;
case MXT_TOUCH_MULTITOUCHSCREEN_T100:
data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
data->T100_reportid_min = min_id;
--
2.19.2
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH v3 13/49] Input: atmel_mxt_ts - release touch state during suspend
2019-09-17 9:36 [PATCH v3 10/49] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2019-09-17 9:36 ` [PATCH v3 11/49] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2019-09-17 9:36 ` [PATCH v3 12/49] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
@ 2019-09-17 9:36 ` Jiada Wang
2019-09-17 9:36 ` [PATCH v3 14/49] Input: atmel_mxt_ts - add regulator control support Jiada Wang
3 siblings, 0 replies; 5+ messages in thread
From: Jiada Wang @ 2019-09-17 9:36 UTC (permalink / raw)
To: nick, dmitry.torokhov, jikos, benjamin.tissoires, rydberg
Cc: linux-input, linux-kernel, jiada_wang
From: Nick Dyer <nick.dyer@itdev.co.uk>
If fingers are down as the MXT chip goes into suspend it does not send a
lift message. In addition, it may not complete its final measurement cycle
immediately, which means touch messages may be received by the interrupt
handler after mxt_stop() has completed.
So:
- disable irq during suspend
- flush any messages created after suspend
- tell app layer that slots were released at suspend
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 26794433086dbc7dea18d2f6a1c8d61ab25bcfda)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[gdavis: Squash fix from Dirk Behme:
- Input: atmel_mxt_ts - remove superfluous data->suspended]
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
---
Notes:
- Squash fix from Dirk Behme:
+ Input: atmel_mxt_ts - remove superfluous data->suspended
data->suspended is already set to false in mxt_load_fw(), so it's not
needed here.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 52 ++++++++++++++++++++++--
1 file changed, 49 insertions(+), 3 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 9dae1c2dd9d9..062383c3616a 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -372,6 +372,9 @@ struct mxt_data {
unsigned int t19_num_keys;
enum mxt_suspend_mode suspend_mode;
+
+ /* Indicates whether device is in suspend */
+ bool suspended;
};
struct mxt_vb2_buffer {
@@ -1151,10 +1154,10 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
mxt_proc_t42_messages(data, message);
} else if (report_id == data->T48_reportid) {
mxt_proc_t48_messages(data, message);
- } else if (!data->input_dev) {
+ } else if (!data->input_dev || data->suspended) {
/*
- * Do not report events if input device
- * is not yet registered.
+ * Do not report events if input device is not
+ * yet registered or returning from suspend
*/
mxt_dump_message(data, message);
} else if (report_id >= data->T9_reportid_min &&
@@ -3135,6 +3138,11 @@ static int mxt_load_fw(struct device *dev, const char *fn)
if (ret)
goto release_firmware;
+ if (data->suspended) {
+ enable_irq(data->irq);
+ data->suspended = false;
+ }
+
if (!data->in_bootloader) {
/* Change to the bootloader mode */
data->in_bootloader = true;
@@ -3306,8 +3314,27 @@ static void mxt_sysfs_remove(struct mxt_data *data)
sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
}
+static void mxt_reset_slots(struct mxt_data *data)
+{
+ struct input_dev *input_dev = data->input_dev;
+ int id;
+
+ if (!input_dev)
+ return;
+
+ for (id = 0; id < data->num_touchids; id++) {
+ input_mt_slot(input_dev, id);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
+ }
+
+ mxt_input_sync(data);
+}
+
static void mxt_start(struct mxt_data *data)
{
+ if (!data->suspended || data->in_bootloader)
+ return;
+
switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
mxt_soft_reset(data);
@@ -3320,16 +3347,29 @@ static void mxt_start(struct mxt_data *data)
case MXT_SUSPEND_DEEP_SLEEP:
default:
+ /*
+ * Discard any touch messages still in message buffer
+ * from before chip went to sleep
+ */
+ mxt_process_messages_until_invalid(data);
+
mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
/* Recalibrate since chip has been in deep sleep */
mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
+
+ mxt_acquire_irq(data);
break;
}
+
+ data->suspended = false;
}
static void mxt_stop(struct mxt_data *data)
{
+ if (data->suspended || data->in_bootloader)
+ return;
+
switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
/* Touch disable */
@@ -3339,9 +3379,15 @@ static void mxt_stop(struct mxt_data *data)
case MXT_SUSPEND_DEEP_SLEEP:
default:
+ disable_irq(data->irq);
+
mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
+
+ mxt_reset_slots(data);
break;
}
+
+ data->suspended = true;
}
static int mxt_input_open(struct input_dev *dev)
--
2.19.2
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH v3 14/49] Input: atmel_mxt_ts - add regulator control support
2019-09-17 9:36 [PATCH v3 10/49] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
` (2 preceding siblings ...)
2019-09-17 9:36 ` [PATCH v3 13/49] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
@ 2019-09-17 9:36 ` Jiada Wang
3 siblings, 0 replies; 5+ messages in thread
From: Jiada Wang @ 2019-09-17 9:36 UTC (permalink / raw)
To: nick, dmitry.torokhov, jikos, benjamin.tissoires, rydberg
Cc: linux-input, linux-kernel, jiada_wang
From: Nick Dyer <nick.dyer@itdev.co.uk>
Allow the driver to optionally manage enabling/disable power to the touch
controller itself. If the regulators are not present then use the deep
sleep power mode instead.
For a correct power on sequence, it is required that we have control over
the RESET line.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 14052b61bb66c2f2283c00e733e131be7a9b8bfc)
[gdavis: Resolve forward port conflicts due to v4.14-rc1 commmit
f657b00df22e ("Input: atmel_mxt_ts - add support for reset
line") and applying upstream commit 96a938aa214e ("Input:
atmel_mxt_ts - remove platform data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[gdavis: Squash fixes from Dirk Behme:
- Input: atmel_mxt_ts - in failure case disable the regulator
- Input: atmel_mxt_ts - disable only enabled regulators
- Input: atmel_mxt_ts - use devm_regulator_get()]
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
---
Notes:
- Squash fixes by Dirk Behme:
+ Input: atmel_mxt_ts - in failure case disable the regulator
If the second regulator_enable(), disable the previously enabled
regulator, again.
+ Input: atmel_mxt_ts - disable only enabled regulators
As enabling the regulators in mxt_regulator_enable() might fail,
check if the regulators are really enabled and disable them only
in this case.
+ Input: atmel_mxt_ts - use devm_regulator_get()
Switch to devm_regulator_get() enabling us to drop the regulator_put()
in the remove function.
[jiada: Resolve forward port conflicts due to commit
5cecc2bccc03f ("Input: atmel_mxt_ts - fix
-Wunused-const-variable")]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
.../bindings/input/atmel,maxtouch.txt | 6 +
MAINTAINERS | 1 +
drivers/input/touchscreen/atmel_mxt_ts.c | 129 ++++++++++++++++--
include/dt-bindings/input/atmel_mxt_ts.h | 22 +++
4 files changed, 149 insertions(+), 9 deletions(-)
create mode 100644 include/dt-bindings/input/atmel_mxt_ts.h
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index c88919480d37..e28139ce3cae 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -31,6 +31,12 @@ Optional properties for main touchpad device:
- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
+- atmel,suspend-mode: Select method used to suspend:
+ MXT_SUSPEND_DEEP_SLEEP - use T7 to suspend the device into deep sleep
+ MXT_SUSPEND_T9_CTRL - use T9.CTRL to turn off touch processing
+ MXT_SUSPEND_REGULATOR - use regulators to power down device during suspend
+ Definitions are in <dt-bindings/input/atmel_mxt_ts.h>.
+
Example:
touch@4b {
diff --git a/MAINTAINERS b/MAINTAINERS
index 47800d32cfbc..1509bb9072fc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2777,6 +2777,7 @@ T: git git://github.com/ndyer/linux.git
S: Maintained
F: Documentation/devicetree/bindings/input/atmel,maxtouch.txt
F: drivers/input/touchscreen/atmel_mxt_ts.c
+F: include/dt-bindings/input/atmel_mxt_ts.h
ATMEL WIRELESS DRIVER
M: Simon Kelley <simon@thekelleys.org.uk>
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 062383c3616a..25ac42967bc7 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -26,10 +26,12 @@
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include <asm/unaligned.h>
+#include <linux/regulator/consumer.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-v4l2.h>
#include <media/videobuf2-vmalloc.h>
+#include <dt-bindings/input/atmel_mxt_ts.h>
/* Firmware files */
#define MXT_FW_NAME "maxtouch.fw"
@@ -215,6 +217,9 @@ enum t100_type {
#define MXT_CRC_TIMEOUT 1000 /* msec */
#define MXT_FW_RESET_TIME 3000 /* msec */
#define MXT_FW_CHG_TIMEOUT 300 /* msec */
+#define MXT_REGULATOR_DELAY 150 /* msec */
+#define MXT_CHG_DELAY 100 /* msec */
+#define MXT_POWERON_DELAY 150 /* msec */
/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
@@ -275,11 +280,6 @@ enum v4l_dbg_inputs {
MXT_V4L_INPUT_MAX,
};
-enum mxt_suspend_mode {
- MXT_SUSPEND_DEEP_SLEEP = 0,
- MXT_SUSPEND_T9_CTRL = 1,
-};
-
/* Config update context */
struct mxt_cfg {
u8 *raw;
@@ -333,6 +333,8 @@ struct mxt_data {
u8 stylus_aux_pressure;
u8 stylus_aux_peak;
bool use_retrigen_workaround;
+ struct regulator *reg_vdd;
+ struct regulator *reg_avdd;
/* Cached parameters from object table */
u16 T5_address;
@@ -2073,6 +2075,94 @@ static int mxt_read_info_block(struct mxt_data *data)
return error;
}
+static void mxt_regulator_enable(struct mxt_data *data)
+{
+ int error;
+
+ if (!data->reg_vdd || !data->reg_avdd)
+ return;
+
+ gpiod_set_value(data->reset_gpio, 0);
+
+ error = regulator_enable(data->reg_vdd);
+ if (error)
+ return;
+
+ error = regulator_enable(data->reg_avdd);
+ if (error) {
+ regulator_disable(data->reg_vdd);
+ return;
+ }
+
+ /*
+ * According to maXTouch power sequencing specification, RESET line
+ * must be kept low until some time after regulators come up to
+ * voltage
+ */
+ msleep(MXT_REGULATOR_DELAY);
+ gpiod_set_value(data->reset_gpio, 1);
+ msleep(MXT_CHG_DELAY);
+
+retry_wait:
+ reinit_completion(&data->bl_completion);
+ data->in_bootloader = true;
+ error = mxt_wait_for_completion(data, &data->bl_completion,
+ MXT_POWERON_DELAY);
+ if (error == -EINTR)
+ goto retry_wait;
+
+ data->in_bootloader = false;
+}
+
+static void mxt_regulator_disable(struct mxt_data *data)
+{
+ if (!data->reg_vdd || !data->reg_avdd)
+ return;
+
+ if (regulator_is_enabled(data->reg_vdd))
+ regulator_disable(data->reg_vdd);
+ if (regulator_is_enabled(data->reg_avdd))
+ regulator_disable(data->reg_avdd);
+}
+
+static int mxt_probe_regulators(struct mxt_data *data)
+{
+ struct device *dev = &data->client->dev;
+ int error;
+
+ /* Must have reset GPIO to use regulator support */
+ if (!data->reset_gpio) {
+ error = -EINVAL;
+ goto fail;
+ }
+
+ data->reg_vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(data->reg_vdd)) {
+ error = PTR_ERR(data->reg_vdd);
+ dev_err(dev, "Error %d getting vdd regulator\n", error);
+ goto fail;
+ }
+
+ data->reg_avdd = devm_regulator_get(dev, "avdd");
+ if (IS_ERR(data->reg_avdd)) {
+ error = PTR_ERR(data->reg_avdd);
+ dev_err(dev, "Error %d getting avdd regulator\n", error);
+ goto fail_release;
+ }
+
+ mxt_regulator_enable(data);
+
+ dev_dbg(dev, "Initialised regulators\n");
+ return 0;
+
+fail_release:
+ regulator_put(data->reg_vdd);
+fail:
+ data->reg_vdd = NULL;
+ data->reg_avdd = NULL;
+ return error;
+}
+
static int mxt_read_t9_resolution(struct mxt_data *data)
{
struct i2c_client *client = data->client;
@@ -3139,7 +3229,12 @@ static int mxt_load_fw(struct device *dev, const char *fn)
goto release_firmware;
if (data->suspended) {
- enable_irq(data->irq);
+ if (data->suspend_mode == MXT_SUSPEND_REGULATOR)
+ mxt_regulator_enable(data);
+
+ if (data->suspend_mode == MXT_SUSPEND_DEEP_SLEEP)
+ enable_irq(data->irq);
+
data->suspended = false;
}
@@ -3345,6 +3440,11 @@ static void mxt_start(struct mxt_data *data)
MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
break;
+ case MXT_SUSPEND_REGULATOR:
+ enable_irq(data->irq);
+ mxt_regulator_enable(data);
+ break;
+
case MXT_SUSPEND_DEEP_SLEEP:
default:
/*
@@ -3377,6 +3477,12 @@ static void mxt_stop(struct mxt_data *data)
MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0);
break;
+ case MXT_SUSPEND_REGULATOR:
+ disable_irq(data->irq);
+ mxt_regulator_disable(data);
+ mxt_reset_slots(data);
+ break;
+
case MXT_SUSPEND_DEEP_SLEEP:
default:
disable_irq(data->irq);
@@ -3470,6 +3576,7 @@ static int mxt_parse_device_properties(struct mxt_data *data)
data->t15_num_keys = n_keys;
}
+ device_property_read_u32(dev, "atmel,suspend-mode", &data->suspend_mode);
return 0;
}
@@ -3556,14 +3663,18 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return error;
}
- disable_irq(client->irq);
-
- if (data->reset_gpio) {
+ if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
+ error = mxt_probe_regulators(data);
+ if (error)
+ return error;
+ } else if (data->reset_gpio) {
msleep(MXT_RESET_GPIO_TIME);
gpiod_set_value(data->reset_gpio, 1);
msleep(MXT_RESET_INVALID_CHG);
}
+ disable_irq(data->irq);
+
error = mxt_initialize(data);
if (error)
return error;
diff --git a/include/dt-bindings/input/atmel_mxt_ts.h b/include/dt-bindings/input/atmel_mxt_ts.h
new file mode 100644
index 000000000000..e4c4c0f6fa37
--- /dev/null
+++ b/include/dt-bindings/input/atmel_mxt_ts.h
@@ -0,0 +1,22 @@
+/*
+ * Atmel maXTouch Touchscreen driver
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ * Author: Nick Dyer <nick.dyer@itdev.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_ATMEL_MXT_TS_H
+#define __DT_BINDINGS_ATMEL_MXT_TS_H
+
+enum mxt_suspend_mode {
+ MXT_SUSPEND_DEEP_SLEEP = 0,
+ MXT_SUSPEND_T9_CTRL = 1,
+ MXT_SUSPEND_REGULATOR = 2,
+};
+
+#endif /* __DT_BINDINGS_ATMEL_MXT_TS_H */
--
2.19.2
^ permalink raw reply [flat|nested] 5+ messages in thread