* [PATCH v3 0/2] mmc: sdhci-milbeaut: add Milbeaut SD driver
@ 2019-09-10 1:40 Takao Orito
2019-10-01 5:17 ` orito.takao
2019-10-03 10:00 ` Ulf Hansson
0 siblings, 2 replies; 4+ messages in thread
From: Takao Orito @ 2019-09-10 1:40 UTC (permalink / raw)
To: ulf.hansson, robh+dt, mark.rutland, adrian.hunter
Cc: linux-mmc, devicetree, linux-kernel, masami.hiramatsu,
jaswinder.singh, sugaya.taichi, kasai.kazuhiro, kanematsu.shinji,
orito.takao
The following patches add driver for SD Host controller on
Socionext's Milbeaut M10V platforms.
SD Host controller on Milbeaut consists of two controller parts.
One is core controller F_SDH30, this is similar to sdhci-fujitsu
controller.
Another is bridge controller. This bridge controller is not compatible
with sdhci-fujitsu controller. This is special for Milbeaut series.
It has the several parts,
- reset control
- clock enable / select for SDR50/25/12
- hold control of DATA/CMD line
- select characteristics for WP/CD/LED line
- Re-tuning control for mode3
- Capability setting
Timeout Clock / Base Clock / Timer Count for Re-Tuning /
Debounce period
These requires special procedures at reset or clock enable/change or
further tuning of clock.
Takao Orito (2):
dt-bindings: mmc: add DT bindings for Milbeaut SD controller
mmc: sdhci-milbeaut: add Milbeaut SD controller driver
.../devicetree/bindings/mmc/sdhci-milbeaut.txt | 30 ++
drivers/mmc/host/Kconfig | 11 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-milbeaut.c | 362 +++++++++++++++++++++
drivers/mmc/host/sdhci_f_sdh30.c | 26 +-
drivers/mmc/host/sdhci_f_sdh30.h | 32 ++
6 files changed, 437 insertions(+), 25 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt
create mode 100644 drivers/mmc/host/sdhci-milbeaut.c
create mode 100644 drivers/mmc/host/sdhci_f_sdh30.h
--
1.9.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3 0/2] mmc: sdhci-milbeaut: add Milbeaut SD driver
2019-09-10 1:40 [PATCH v3 0/2] mmc: sdhci-milbeaut: add Milbeaut SD driver Takao Orito
@ 2019-10-01 5:17 ` orito.takao
2019-10-03 10:00 ` Ulf Hansson
1 sibling, 0 replies; 4+ messages in thread
From: orito.takao @ 2019-10-01 5:17 UTC (permalink / raw)
To: ulf.hansson, robh+dt, mark.rutland, adrian.hunter
Cc: linux-mmc, devicetree, linux-kernel, masami.hiramatsu,
jaswinder.singh, sugaya.taichi, kasai.kazuhiro, kanematsu.shinji
Hello
Does anyone have any comments on this ?
> The following patches add driver for SD Host controller on
> Socionext's Milbeaut M10V platforms.
>
> SD Host controller on Milbeaut consists of two controller parts.
> One is core controller F_SDH30, this is similar to sdhci-fujitsu
> controller.
> Another is bridge controller. This bridge controller is not compatible
> with sdhci-fujitsu controller. This is special for Milbeaut series.
>
> It has the several parts,
> - reset control
> - clock enable / select for SDR50/25/12
> - hold control of DATA/CMD line
> - select characteristics for WP/CD/LED line
> - Re-tuning control for mode3
> - Capability setting
> Timeout Clock / Base Clock / Timer Count for Re-Tuning /
> Debounce period
> These requires special procedures at reset or clock enable/change or
> further tuning of clock.
>
> Takao Orito (2):
> dt-bindings: mmc: add DT bindings for Milbeaut SD controller
> mmc: sdhci-milbeaut: add Milbeaut SD controller driver
>
> .../devicetree/bindings/mmc/sdhci-milbeaut.txt | 30 ++
> drivers/mmc/host/Kconfig | 11 +
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-milbeaut.c | 362 +++++++++++++++++++++
> drivers/mmc/host/sdhci_f_sdh30.c | 26 +-
> drivers/mmc/host/sdhci_f_sdh30.h | 32 ++
> 6 files changed, 437 insertions(+), 25 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt
> create mode 100644 drivers/mmc/host/sdhci-milbeaut.c
> create mode 100644 drivers/mmc/host/sdhci_f_sdh30.h
>
> --
> 1.9.1
>
Thanks
Orito
-----------------------------------------------------------------
Takao Orito
Socionext Inc.
E-mail:orito.takao@socionext.com
Tel:+81-80-9815-1460
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3 0/2] mmc: sdhci-milbeaut: add Milbeaut SD driver
2019-09-10 1:40 [PATCH v3 0/2] mmc: sdhci-milbeaut: add Milbeaut SD driver Takao Orito
2019-10-01 5:17 ` orito.takao
@ 2019-10-03 10:00 ` Ulf Hansson
2019-10-07 2:32 ` orito.takao
1 sibling, 1 reply; 4+ messages in thread
From: Ulf Hansson @ 2019-10-03 10:00 UTC (permalink / raw)
To: Takao Orito
Cc: Rob Herring, Mark Rutland, Adrian Hunter, linux-mmc, DTML,
Linux Kernel Mailing List, Masami Hiramatsu, Jaswinder Singh,
sugaya.taichi, kasai.kazuhiro, kanematsu.shinji
On Tue, 10 Sep 2019 at 03:39, Takao Orito <orito.takao@socionext.com> wrote:
>
> The following patches add driver for SD Host controller on
> Socionext's Milbeaut M10V platforms.
>
> SD Host controller on Milbeaut consists of two controller parts.
> One is core controller F_SDH30, this is similar to sdhci-fujitsu
> controller.
> Another is bridge controller. This bridge controller is not compatible
> with sdhci-fujitsu controller. This is special for Milbeaut series.
>
> It has the several parts,
> - reset control
> - clock enable / select for SDR50/25/12
> - hold control of DATA/CMD line
> - select characteristics for WP/CD/LED line
> - Re-tuning control for mode3
> - Capability setting
> Timeout Clock / Base Clock / Timer Count for Re-Tuning /
> Debounce period
> These requires special procedures at reset or clock enable/change or
> further tuning of clock.
>
> Takao Orito (2):
> dt-bindings: mmc: add DT bindings for Milbeaut SD controller
> mmc: sdhci-milbeaut: add Milbeaut SD controller driver
>
> .../devicetree/bindings/mmc/sdhci-milbeaut.txt | 30 ++
> drivers/mmc/host/Kconfig | 11 +
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-milbeaut.c | 362 +++++++++++++++++++++
> drivers/mmc/host/sdhci_f_sdh30.c | 26 +-
> drivers/mmc/host/sdhci_f_sdh30.h | 32 ++
> 6 files changed, 437 insertions(+), 25 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt
> create mode 100644 drivers/mmc/host/sdhci-milbeaut.c
> create mode 100644 drivers/mmc/host/sdhci_f_sdh30.h
>
> --
> 1.9.1
>
>
Applied for next, thanks!
Kind regards
Uffe
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3 0/2] mmc: sdhci-milbeaut: add Milbeaut SD driver
2019-10-03 10:00 ` Ulf Hansson
@ 2019-10-07 2:32 ` orito.takao
0 siblings, 0 replies; 4+ messages in thread
From: orito.takao @ 2019-10-07 2:32 UTC (permalink / raw)
To: ulf.hansson
Cc: robh+dt, mark.rutland, adrian.hunter, linux-mmc, devicetree,
linux-kernel, masami.hiramatsu, jaswinder.singh, sugaya.taichi,
kasai.kazuhiro, kanematsu.shinji
Thanks for checking and pushing my patch !
Orito
> On Tue, 10 Sep 2019 at 03:39, Takao Orito <orito.takao@socionext.com> wrote:
> >
> > The following patches add driver for SD Host controller on
> > Socionext's Milbeaut M10V platforms.
> >
> > SD Host controller on Milbeaut consists of two controller parts.
> > One is core controller F_SDH30, this is similar to sdhci-fujitsu
> > controller.
> > Another is bridge controller. This bridge controller is not compatible
> > with sdhci-fujitsu controller. This is special for Milbeaut series.
> >
> > It has the several parts,
> > - reset control
> > - clock enable / select for SDR50/25/12
> > - hold control of DATA/CMD line
> > - select characteristics for WP/CD/LED line
> > - Re-tuning control for mode3
> > - Capability setting
> > Timeout Clock / Base Clock / Timer Count for Re-Tuning /
> > Debounce period
> > These requires special procedures at reset or clock enable/change or
> > further tuning of clock.
> >
> > Takao Orito (2):
> > dt-bindings: mmc: add DT bindings for Milbeaut SD controller
> > mmc: sdhci-milbeaut: add Milbeaut SD controller driver
> >
> > .../devicetree/bindings/mmc/sdhci-milbeaut.txt | 30 ++
> > drivers/mmc/host/Kconfig | 11 +
> > drivers/mmc/host/Makefile | 1 +
> > drivers/mmc/host/sdhci-milbeaut.c | 362 +++++++++++++++++++++
> > drivers/mmc/host/sdhci_f_sdh30.c | 26 +-
> > drivers/mmc/host/sdhci_f_sdh30.h | 32 ++
> > 6 files changed, 437 insertions(+), 25 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt
> > create mode 100644 drivers/mmc/host/sdhci-milbeaut.c
> > create mode 100644 drivers/mmc/host/sdhci_f_sdh30.h
> >
> > --
> > 1.9.1
> >
> >
>
> Applied for next, thanks!
>
> Kind regards
> Uffe
-----------------------------------------------------------------
Takao Orito
Socionext Inc.
E-mail:orito.takao@socionext.com
Tel:+81-80-9815-1460
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-10-07 2:32 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-10 1:40 [PATCH v3 0/2] mmc: sdhci-milbeaut: add Milbeaut SD driver Takao Orito
2019-10-01 5:17 ` orito.takao
2019-10-03 10:00 ` Ulf Hansson
2019-10-07 2:32 ` orito.takao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome