* [PATCH 1/3] regulator: rk808: Constify rk817 regulator_ops
@ 2019-10-08 1:06 Axel Lin
2019-10-08 1:06 ` [PATCH 2/3] regulator: rk808: Fix warning message in rk817_set_ramp_delay Axel Lin
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Axel Lin @ 2019-10-08 1:06 UTC (permalink / raw)
To: Mark Brown
Cc: Heiko Stuebner, Tony Xie, Liam Girdwood, linux-kernel, Axel Lin
These regulator_ops variables never need to be modified, make them const so
compiler can put them to .rodata.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/rk808-regulator.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 61bd5ef0806c..eda056fce65f 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -686,7 +686,7 @@ static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0),
};
-static struct regulator_ops rk809_buck5_ops_range = {
+static const struct regulator_ops rk809_buck5_ops_range = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -700,7 +700,7 @@ static struct regulator_ops rk809_buck5_ops_range = {
.set_suspend_disable = rk817_set_suspend_disable,
};
-static struct regulator_ops rk817_reg_ops = {
+static const struct regulator_ops rk817_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -713,7 +713,7 @@ static struct regulator_ops rk817_reg_ops = {
.set_suspend_disable = rk817_set_suspend_disable,
};
-static struct regulator_ops rk817_boost_ops = {
+static const struct regulator_ops rk817_boost_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -725,7 +725,7 @@ static struct regulator_ops rk817_boost_ops = {
.set_suspend_disable = rk817_set_suspend_disable,
};
-static struct regulator_ops rk817_buck_ops_range = {
+static const struct regulator_ops rk817_buck_ops_range = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -743,7 +743,7 @@ static struct regulator_ops rk817_buck_ops_range = {
.set_suspend_disable = rk817_set_suspend_disable,
};
-static struct regulator_ops rk817_switch_ops = {
+static const struct regulator_ops rk817_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
--
2.20.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH 2/3] regulator: rk808: Fix warning message in rk817_set_ramp_delay
2019-10-08 1:06 [PATCH 1/3] regulator: rk808: Constify rk817 regulator_ops Axel Lin
@ 2019-10-08 1:06 ` Axel Lin
2019-10-08 10:52 ` Applied "regulator: rk808: Fix warning message in rk817_set_ramp_delay" to the regulator tree Mark Brown
2019-10-08 1:06 ` [PATCH 3/3] regulator: rk808: Remove rk817_set_suspend_voltage function Axel Lin
2019-10-08 10:52 ` Applied "regulator: rk808: Constify rk817 regulator_ops" " Mark Brown
2 siblings, 1 reply; 6+ messages in thread
From: Axel Lin @ 2019-10-08 1:06 UTC (permalink / raw)
To: Mark Brown
Cc: Heiko Stuebner, Tony Xie, Liam Girdwood, linux-kernel, Axel Lin
The default in rk817_set_ramp_delay is 25MV rather than 10MV.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/rk808-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index eda056fce65f..d0d1b868b0cd 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -388,7 +388,7 @@ static int rk817_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
break;
default:
dev_warn(&rdev->dev,
- "%s ramp_delay: %d not supported, setting 10000\n",
+ "%s ramp_delay: %d not supported, setting 25000\n",
rdev->desc->name, ramp_delay);
}
--
2.20.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* Applied "regulator: rk808: Fix warning message in rk817_set_ramp_delay" to the regulator tree
2019-10-08 1:06 ` [PATCH 2/3] regulator: rk808: Fix warning message in rk817_set_ramp_delay Axel Lin
@ 2019-10-08 10:52 ` Mark Brown
0 siblings, 0 replies; 6+ messages in thread
From: Mark Brown @ 2019-10-08 10:52 UTC (permalink / raw)
To: Axel Lin
Cc: Heiko Stuebner, Liam Girdwood, linux-kernel, Mark Brown, Tony Xie
The patch
regulator: rk808: Fix warning message in rk817_set_ramp_delay
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From cc37038fe344e6000d30879c27521ee47c534fc8 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 8 Oct 2019 09:06:27 +0800
Subject: [PATCH] regulator: rk808: Fix warning message in rk817_set_ramp_delay
The default in rk817_set_ramp_delay is 25MV rather than 10MV.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20191008010628.8513-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/rk808-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index eda056fce65f..d0d1b868b0cd 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -388,7 +388,7 @@ static int rk817_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
break;
default:
dev_warn(&rdev->dev,
- "%s ramp_delay: %d not supported, setting 10000\n",
+ "%s ramp_delay: %d not supported, setting 25000\n",
rdev->desc->name, ramp_delay);
}
--
2.20.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 3/3] regulator: rk808: Remove rk817_set_suspend_voltage function
2019-10-08 1:06 [PATCH 1/3] regulator: rk808: Constify rk817 regulator_ops Axel Lin
2019-10-08 1:06 ` [PATCH 2/3] regulator: rk808: Fix warning message in rk817_set_ramp_delay Axel Lin
@ 2019-10-08 1:06 ` Axel Lin
2019-10-08 10:52 ` Applied "regulator: rk808: Remove rk817_set_suspend_voltage function" to the regulator tree Mark Brown
2019-10-08 10:52 ` Applied "regulator: rk808: Constify rk817 regulator_ops" " Mark Brown
2 siblings, 1 reply; 6+ messages in thread
From: Axel Lin @ 2019-10-08 1:06 UTC (permalink / raw)
To: Mark Brown
Cc: Heiko Stuebner, Tony Xie, Liam Girdwood, linux-kernel, Axel Lin
The implement is exactly the same as rk808_set_suspend_voltage, so just
use rk808_set_suspend_voltage instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/rk808-regulator.c | 17 +----------------
1 file changed, 1 insertion(+), 16 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index d0d1b868b0cd..5b4003226484 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -411,21 +411,6 @@ static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
sel);
}
-static int rk817_set_suspend_voltage(struct regulator_dev *rdev, int uv)
-{
- unsigned int reg;
- int sel = regulator_map_voltage_linear(rdev, uv, uv);
- /* only ldo1~ldo9 */
- if (sel < 0)
- return -EINVAL;
-
- reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
-
- return regmap_update_bits(rdev->regmap, reg,
- rdev->desc->vsel_mask,
- sel);
-}
-
static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
@@ -708,7 +693,7 @@ static const struct regulator_ops rk817_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
- .set_suspend_voltage = rk817_set_suspend_voltage,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk817_set_suspend_enable,
.set_suspend_disable = rk817_set_suspend_disable,
};
--
2.20.1
^ permalink raw reply [flat|nested] 6+ messages in thread* Applied "regulator: rk808: Remove rk817_set_suspend_voltage function" to the regulator tree
2019-10-08 1:06 ` [PATCH 3/3] regulator: rk808: Remove rk817_set_suspend_voltage function Axel Lin
@ 2019-10-08 10:52 ` Mark Brown
0 siblings, 0 replies; 6+ messages in thread
From: Mark Brown @ 2019-10-08 10:52 UTC (permalink / raw)
To: Axel Lin
Cc: Heiko Stuebner, Liam Girdwood, linux-kernel, Mark Brown, Tony Xie
The patch
regulator: rk808: Remove rk817_set_suspend_voltage function
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 9306a733f8eac86400b9149db6d047dc371e46a2 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 8 Oct 2019 09:06:28 +0800
Subject: [PATCH] regulator: rk808: Remove rk817_set_suspend_voltage function
The implement is exactly the same as rk808_set_suspend_voltage, so just
use rk808_set_suspend_voltage instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20191008010628.8513-3-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/rk808-regulator.c | 17 +----------------
1 file changed, 1 insertion(+), 16 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index d0d1b868b0cd..5b4003226484 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -411,21 +411,6 @@ static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
sel);
}
-static int rk817_set_suspend_voltage(struct regulator_dev *rdev, int uv)
-{
- unsigned int reg;
- int sel = regulator_map_voltage_linear(rdev, uv, uv);
- /* only ldo1~ldo9 */
- if (sel < 0)
- return -EINVAL;
-
- reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
-
- return regmap_update_bits(rdev->regmap, reg,
- rdev->desc->vsel_mask,
- sel);
-}
-
static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
@@ -708,7 +693,7 @@ static const struct regulator_ops rk817_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
- .set_suspend_voltage = rk817_set_suspend_voltage,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk817_set_suspend_enable,
.set_suspend_disable = rk817_set_suspend_disable,
};
--
2.20.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* Applied "regulator: rk808: Constify rk817 regulator_ops" to the regulator tree
2019-10-08 1:06 [PATCH 1/3] regulator: rk808: Constify rk817 regulator_ops Axel Lin
2019-10-08 1:06 ` [PATCH 2/3] regulator: rk808: Fix warning message in rk817_set_ramp_delay Axel Lin
2019-10-08 1:06 ` [PATCH 3/3] regulator: rk808: Remove rk817_set_suspend_voltage function Axel Lin
@ 2019-10-08 10:52 ` Mark Brown
2 siblings, 0 replies; 6+ messages in thread
From: Mark Brown @ 2019-10-08 10:52 UTC (permalink / raw)
To: Axel Lin
Cc: Heiko Stuebner, Liam Girdwood, linux-kernel, Mark Brown, Tony Xie
The patch
regulator: rk808: Constify rk817 regulator_ops
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 2e67f32296e3f1841793e36ce796f1497614c687 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Tue, 8 Oct 2019 09:06:26 +0800
Subject: [PATCH] regulator: rk808: Constify rk817 regulator_ops
These regulator_ops variables never need to be modified, make them const so
compiler can put them to .rodata.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20191008010628.8513-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/rk808-regulator.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 61bd5ef0806c..eda056fce65f 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -686,7 +686,7 @@ static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0),
};
-static struct regulator_ops rk809_buck5_ops_range = {
+static const struct regulator_ops rk809_buck5_ops_range = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -700,7 +700,7 @@ static struct regulator_ops rk809_buck5_ops_range = {
.set_suspend_disable = rk817_set_suspend_disable,
};
-static struct regulator_ops rk817_reg_ops = {
+static const struct regulator_ops rk817_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -713,7 +713,7 @@ static struct regulator_ops rk817_reg_ops = {
.set_suspend_disable = rk817_set_suspend_disable,
};
-static struct regulator_ops rk817_boost_ops = {
+static const struct regulator_ops rk817_boost_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -725,7 +725,7 @@ static struct regulator_ops rk817_boost_ops = {
.set_suspend_disable = rk817_set_suspend_disable,
};
-static struct regulator_ops rk817_buck_ops_range = {
+static const struct regulator_ops rk817_buck_ops_range = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -743,7 +743,7 @@ static struct regulator_ops rk817_buck_ops_range = {
.set_suspend_disable = rk817_set_suspend_disable,
};
-static struct regulator_ops rk817_switch_ops = {
+static const struct regulator_ops rk817_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
--
2.20.1
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-10-08 10:53 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-08 1:06 [PATCH 1/3] regulator: rk808: Constify rk817 regulator_ops Axel Lin
2019-10-08 1:06 ` [PATCH 2/3] regulator: rk808: Fix warning message in rk817_set_ramp_delay Axel Lin
2019-10-08 10:52 ` Applied "regulator: rk808: Fix warning message in rk817_set_ramp_delay" to the regulator tree Mark Brown
2019-10-08 1:06 ` [PATCH 3/3] regulator: rk808: Remove rk817_set_suspend_voltage function Axel Lin
2019-10-08 10:52 ` Applied "regulator: rk808: Remove rk817_set_suspend_voltage function" to the regulator tree Mark Brown
2019-10-08 10:52 ` Applied "regulator: rk808: Constify rk817 regulator_ops" " Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®