[Patch v4 0/3] media: ov5640: updates

[Patch v4 0/3] media: ov5640: updates

[Benoit Parrot]

This patch series is a collection of patches we have been carrying for a
while.

First, it adds support for PIXEL_RATE control which is used by some
CSI2 receiver driver to properly set-up their DPHY.

Then we fix an issue related to having extra sensor enable/disable in
the register array for the 1920x1080 mode.

Finally we restrict the largest resolution which should only be
available at the lowest FPS.

Changes since v3:
- Fix a potential early pointer dereference in init_controls.
  Reported by Sakari.

Changes since v2:
- Addressed comment from Sakari and Jacopo.
- Make use of the calc_pixel_rate in set_mode also
- Cleaned up the pixel_rate ctrl struct
- Fix the fps condition checking for the max resolution case

Changes since v1:
- Addressed comment from Sakari.
  added a function to calculate the pixel rate and remove the need to
  cache its value


Benoit Parrot (3):
  media: ov5640: add PIXEL_RATE control
  media: ov5640: Fix 1920x1080 mode to remove extra enable/disable
  media: ov5640: Make 2592x1944 mode only available at 15 fps

 drivers/media/i2c/ov5640.c | 33 +++++++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

-- 
2.17.1

[Patch v4 1/3] media: ov5640: add PIXEL_RATE control

[Benoit Parrot]

Add v4l2 controls to report the pixel rates of each mode. This is
needed by some CSI2 receiver in order to perform proper DPHY
configuration.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/media/i2c/ov5640.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 500d9bbff10b..b93b61baace5 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -193,6 +193,7 @@ struct ov5640_mode_info {
 
 struct ov5640_ctrls {
 	struct v4l2_ctrl_handler handler;
+	struct v4l2_ctrl *pixel_rate;
 	struct {
 		struct v4l2_ctrl *auto_exp;
 		struct v4l2_ctrl *exposure;
@@ -1614,6 +1615,16 @@ ov5640_find_mode(struct ov5640_dev *sensor, enum ov5640_frame_rate fr,
 	return mode;
 }
 
+static u64 ov5640_calc_pixel_rate(struct ov5640_dev *sensor)
+{
+	u64 rate;
+
+	rate = sensor->current_mode->vtot * sensor->current_mode->htot;
+	rate *= ov5640_framerates[sensor->current_fr];
+
+	return rate;
+}
+
 /*
  * sensor changes between scaling and subsampling, go through
  * exposure calculation
@@ -1818,8 +1829,7 @@ static int ov5640_set_mode(struct ov5640_dev *sensor)
 	 * All the formats we support have 16 bits per pixel, seems to require
 	 * the same rate than YUV, so we can just use 16 bpp all the time.
 	 */
-	rate = mode->vtot * mode->htot * 16;
-	rate *= ov5640_framerates[sensor->current_fr];
+	rate = ov5640_calc_pixel_rate(sensor) * 16;
 	if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
 		rate = rate / sensor->ep.bus.mipi_csi2.num_data_lanes;
 		ret = ov5640_set_mipi_pclk(sensor, rate);
@@ -2233,6 +2243,8 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
 	if (mbus_fmt->code != sensor->fmt.code)
 		sensor->pending_fmt_change = true;
 
+	__v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
+				 ov5640_calc_pixel_rate(sensor));
 out:
 	mutex_unlock(&sensor->lock);
 	return ret;
@@ -2657,6 +2669,11 @@ static int ov5640_init_controls(struct ov5640_dev *sensor)
 	/* we can use our own mutex for the ctrl lock */
 	hdl->lock = &sensor->lock;
 
+	/* Clock related controls */
+	ctrls->pixel_rate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE,
+					      0, INT_MAX, 1,
+					      ov5640_calc_pixel_rate(sensor));
+
 	/* Auto/manual white balance */
 	ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
 					   V4L2_CID_AUTO_WHITE_BALANCE,
@@ -2704,6 +2721,7 @@ static int ov5640_init_controls(struct ov5640_dev *sensor)
 		goto free_ctrls;
 	}
 
+	ctrls->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 	ctrls->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
 	ctrls->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
 
@@ -2816,6 +2834,9 @@ static int ov5640_s_frame_interval(struct v4l2_subdev *sd,
 		sensor->frame_interval = fi->interval;
 		sensor->current_mode = mode;
 		sensor->pending_mode_change = true;
+
+		__v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
+					 ov5640_calc_pixel_rate(sensor));
 	}
 out:
 	mutex_unlock(&sensor->lock);
-- 
2.17.1

[Patch v4 2/3] media: ov5640: Fix 1920x1080 mode to remove extra enable/disable

[Benoit Parrot]

In the 1920x1080 register array an extra pair of reset ctrl disable
re-enable was causing unwanted init delays.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
---
 drivers/media/i2c/ov5640.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index b93b61baace5..065c9b61ecbd 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -490,7 +490,6 @@ static const struct reg_value ov5640_setting_720P_1280_720[] = {
 };
 
 static const struct reg_value ov5640_setting_1080P_1920_1080[] = {
-	{0x3008, 0x42, 0, 0},
 	{0x3c07, 0x08, 0, 0},
 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
 	{0x3814, 0x11, 0, 0},
@@ -518,7 +517,7 @@ static const struct reg_value ov5640_setting_1080P_1920_1080[] = {
 	{0x3a0e, 0x03, 0, 0}, {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x04, 0, 0},
 	{0x3a15, 0x60, 0, 0}, {0x4407, 0x04, 0, 0},
 	{0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0}, {0x3824, 0x04, 0, 0},
-	{0x4005, 0x1a, 0, 0}, {0x3008, 0x02, 0, 0},
+	{0x4005, 0x1a, 0, 0},
 };
 
 static const struct reg_value ov5640_setting_QSXGA_2592_1944[] = {
-- 
2.17.1

[Patch v4 3/3] media: ov5640: Make 2592x1944 mode only available at 15 fps

[Benoit Parrot]

The sensor data sheet clearly state that 2592x1944 only works at 15 fps
make sure we don't try to miss configure the pll out of acceptable
range.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
---
 drivers/media/i2c/ov5640.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 065c9b61ecbd..5e495c833d32 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -1611,6 +1611,11 @@ ov5640_find_mode(struct ov5640_dev *sensor, enum ov5640_frame_rate fr,
 	    !(mode->hact == 640 && mode->vact == 480))
 		return NULL;
 
+	/* 2592x1944 only works at 15fps max */
+	if ((mode->hact == 2592 && mode->vact == 1944) &&
+	    fr > OV5640_15_FPS)
+		return NULL;
+
 	return mode;
 }
 
-- 
2.17.1