From: Mark Rutland <mark.rutland@arm.com>
To: Ganapatrao Prabhakerrao Kulkarni <gkulkarni@marvell.com>
Cc: "linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"peterz@infradead.org" <peterz@infradead.org>,
"mingo@redhat.com" <mingo@redhat.com>,
"will@kernel.org" <will@kernel.org>,
"corbet@lwn.net" <corbet@lwn.net>,
"gklkml16@gmail.com" <gklkml16@gmail.com>
Subject: Re: [PATCH 1/2] perf/core: Adding capability to disable PMUs event multiplexing
Date: Wed, 6 Nov 2019 11:28:29 +0000 [thread overview]
Message-ID: <20191106112810.GA50610@lakrids.cambridge.arm.com> (raw)
In-Reply-To: <1573002091-9744-2-git-send-email-gkulkarni@marvell.com>
On Wed, Nov 06, 2019 at 01:01:40AM +0000, Ganapatrao Prabhakerrao Kulkarni wrote:
> When PMUs are registered, perf core enables event multiplexing
> support by default. There is no provision for PMUs to disable
> event multiplexing, if PMUs want to disable due to unavoidable
> circumstances like hardware errata etc.
>
> Adding PMU capability flag PERF_PMU_CAP_NO_MUX_EVENTS and support
> to allow PMUs to explicitly disable event multiplexing.
Even without multiplexing, this PMU activity can happen when switching
tasks, or when creating/destroying events, so as-is I don't think this
makes much sense.
If there's an erratum whereby heavy access to the PMU can lockup the
core, and it's possible to workaround that by minimzing accesses, that
should be done in the back-end PMU driver.
Either way, this minimzes the utility of the PMU.
Thanks,
Mark.
>
> Signed-off-by: Ganapatrao Prabhakerrao Kulkarni <gkulkarni@marvell.com>
> ---
> include/linux/perf_event.h | 1 +
> kernel/events/core.c | 8 ++++++++
> 2 files changed, 9 insertions(+)
>
> diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
> index 61448c19a132..9e18d841daf7 100644
> --- a/include/linux/perf_event.h
> +++ b/include/linux/perf_event.h
> @@ -247,6 +247,7 @@ struct perf_event;
> #define PERF_PMU_CAP_HETEROGENEOUS_CPUS 0x40
> #define PERF_PMU_CAP_NO_EXCLUDE 0x80
> #define PERF_PMU_CAP_AUX_OUTPUT 0x100
> +#define PERF_PMU_CAP_NO_MUX_EVENTS 0x200
>
> /**
> * struct pmu - generic performance monitoring unit
> diff --git a/kernel/events/core.c b/kernel/events/core.c
> index 4655adbbae10..65452784f81c 100644
> --- a/kernel/events/core.c
> +++ b/kernel/events/core.c
> @@ -1092,6 +1092,10 @@ static void __perf_mux_hrtimer_init(struct perf_cpu_context *cpuctx, int cpu)
> if (pmu->task_ctx_nr == perf_sw_context)
> return;
>
> + /* No PMU support */
> + if (pmu->capabilities & PERF_PMU_CAP_NO_MUX_EVENTS)
> + return 0;
> +
> /*
> * check default is sane, if not set then force to
> * default interval (1/tick)
> @@ -1117,6 +1121,10 @@ static int perf_mux_hrtimer_restart(struct perf_cpu_context *cpuctx)
> if (pmu->task_ctx_nr == perf_sw_context)
> return 0;
>
> + /* No PMU support */
> + if (pmu->capabilities & PERF_PMU_CAP_NO_MUX_EVENTS)
> + return 0;
> +
> raw_spin_lock_irqsave(&cpuctx->hrtimer_lock, flags);
> if (!cpuctx->hrtimer_active) {
> cpuctx->hrtimer_active = 1;
> --
> 2.17.1
>
next prev parent reply other threads:[~2019-11-06 11:28 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-06 1:01 [PATCH 0/2] Workaround for ThunderX2 erratum 221 Ganapatrao Prabhakerrao Kulkarni
2019-11-06 1:01 ` [PATCH 1/2] perf/core: Adding capability to disable PMUs event multiplexing Ganapatrao Prabhakerrao Kulkarni
2019-11-06 9:40 ` Peter Zijlstra
2019-11-06 9:58 ` Peter Zijlstra
2019-11-06 11:28 ` Mark Rutland [this message]
2019-11-06 23:28 ` Ganapatrao Kulkarni
2019-11-07 14:35 ` Ganapatrao Kulkarni
2019-11-07 14:52 ` Mark Rutland
2019-11-07 15:45 ` Ganapatrao Kulkarni
2019-11-07 15:54 ` Mark Rutland
2019-11-07 15:04 ` Peter Zijlstra
2019-11-07 23:17 ` kbuild test robot
2019-11-06 1:01 ` [PATCH 2/2] Thunderx2, uncore: Add workaround for ThunderX2 erratum 221 Ganapatrao Prabhakerrao Kulkarni
2019-11-06 11:37 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191106112810.GA50610@lakrids.cambridge.arm.com \
--to=mark.rutland@arm.com \
--cc=corbet@lwn.net \
--cc=gklkml16@gmail.com \
--cc=gkulkarni@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®