[PATCH 1/2] spi: bcm-qspi: Convert to use CS GPIO descriptors

[Chris Packham <chris.packham@alliedtelesis.co.nz>]

Set use_gpio_descriptors to true and avoid asserting the native chip
select if the spi core has done it for us.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/spi/spi-bcm-qspi.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 7a3531856491..85bad70f59e3 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -803,7 +803,8 @@ static int bcm_qspi_bspi_exec_mem_op(struct spi_device *spi,
 			return -EIO;
 
 	from = op->addr.val;
-	bcm_qspi_chip_select(qspi, spi->chip_select);
+	if (!spi->cs_gpiod)
+		bcm_qspi_chip_select(qspi, spi->chip_select);
 	bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
 
 	/*
@@ -882,7 +883,8 @@ static int bcm_qspi_transfer_one(struct spi_master *master,
 	int slots;
 	unsigned long timeo = msecs_to_jiffies(100);
 
-	bcm_qspi_chip_select(qspi, spi->chip_select);
+	if (!spi->cs_gpiod)
+		bcm_qspi_chip_select(qspi, spi->chip_select);
 	qspi->trans_pos.trans = trans;
 	qspi->trans_pos.byte = 0;
 
@@ -1234,6 +1236,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	master->cleanup = bcm_qspi_cleanup;
 	master->dev.of_node = dev->of_node;
 	master->num_chipselect = NUM_CHIPSELECT;
+	master->use_gpio_descriptors = true;
 
 	qspi->big_endian = of_device_is_big_endian(dev->of_node);
 
-- 
2.24.0